[ 0.000000@0]d Booting Linux on physical CPU 0x0 [ 0.000000@0]d Linux version 4.9.269 (docker@7eeb6dcb72cf) (gcc version 13.2.0 (GCC) ) #1 SMP PREEMPT Sat Feb 1 05:20:42 IST 2025 [ 0.000000@0]d Boot CPU: AArch64 Processor [412fd050] [ 0.000000@0]d CoreELEC dt-id: sc2_s905x4_sei_smb_280_id7 [ 0.000000@0]d Machine model: RockTek G2, Nokia 8010 [ 0.000000@0]d earlycon: aml-uart0 at MMIO 0x00000000fe07a000 (options '') [ 0.000000@0]d bootconsole [aml-uart0] enabled [ 0.000000@0]d 08400000 - 08500000, 1024 KB, ramoops@0x08400000 [ 0.000000@0]d __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000008400000, len:52 MiB [ 0.000000@0]d 05000000 - 08400000, 53248 KB, linux,secmon [ 0.000000@0]d __reserved_mem_alloc_size, start:0x00000000f0800000, end:0x00000000f1000000, len:8 MiB [ 0.000000@0]d f0800000 - f1000000, 8192 KB, linux,meson-fb [ 0.000000@0]d __reserved_mem_alloc_size, start:0x0000000030000000, end:0x0000000030800000, len:8 MiB [ 0.000000@0]d 30000000 - 30800000, 8192 KB, linux,dsp_fw [ 0.000000@0]d e8800000 - f0800000, 131072 KB, linux,ion-dev [ 0.000000@0]d Reserved memory: created DMA memory pool at 0x00000000e8800000, size 0 MiB [ 0.000000@0]d e8800000 - e8800000, 0 KB, linux,ppmgr [ 0.000000@0]d cd800000 - e8800000, 442368 KB, linux,codec_mm_cma [ 0.000000@0]d cd800000 - cd800000, 0 KB, linux,codec_mm_reserved [ 0.000000@0]d cb800000 - cd800000, 32768 KB, linux,vm0_cma [ 0.000000@0]d cma: Reserved 8 MiB at 0x00000000cb000000 [ 0.000000@0]d On node 0 totalpages: 987136 [ 0.000000@0]d DMA zone: 15424 pages used for memmap [ 0.000000@0]d DMA zone: 0 pages reserved [ 0.000000@0]d DMA zone: 987136 pages, LIFO batch:31 [ 0.000000@0]d psci: probing for conduit method from DT. [ 0.000000@0]d psci: PSCIv1.0 detected in firmware. [ 0.000000@0]d psci: Using standard PSCI v0.2 function IDs [ 0.000000@0]d psci: Trusted OS migration not required [ 0.000000@0]d psci: SMC Calling Convention v1.1 [ 0.000000@0]d percpu: Embedded 21 pages/cpu s47576 r8192 d30248 u86016 [ 0.000000@0]d pcpu-alloc: s47576 r8192 d30248 u86016 alloc=21*4096 [ 0.000000@0]d pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000@0]d Detected VIPT I-cache on CPU0 [ 0.000000@0]d Built 1 zonelists in Zone order, mobility grouping on. Total pages: 971712 [ 0.000000@0]d Kernel command line: init=/init console=ttyS0,921600 no_console_suspend earlycon=aml-uart,0xfe07a000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 loop.max_part=4 scramble_reg=0xfe02e030 scsi_mod.scan=async xhci_hcd.quirks=0x800000 loglevel=1 otg_device=1 hw_id=7 bct3236_rgbcolor=0x003028 skip_driver_register=0 cma_first_wm_low=on logo=osd0,loaded,0x00300000 vout=2160p30hz,enable panel_type=lcd_1 hdmitx=,422,12bit hdmimode=2160p30hz hdmichecksum=0x9f160000 dolby_vision_on=0 hdr_policy=1 hdr_priority=0 androidboot.enable_console= config_csc_en=1frac_rate_policy=1 hdmi_read_edid=1 cvbsmode=480cvbs osd_reverse=0 video_reverse=0 irq_check_en=0 androidboot.selinux=enforcing androidboot.firstboot=0 androidboot.sei_kernelLog=0 jtag=disable disable_ir=0 androidboot.bootloader=01.01.240930.103908 androidboot.hardware=amlogic mac=8C:98:06:2A:87:14 androidboot.mac=8C:98:06:2A:87:14 androidboot.serialno=RTG2X2813524000008 androidboot.oem=ATV00100021000000000 [ 0.000000@0]d fb: osd0 [ 0.000000@0]d fb: loaded [ 0.000000@0]d fb: 0x00300000 [ 0.000000@0]d vout: 2160p30hz [ 0.000000@0]d vout: enable: 1 [ 0.000000@0]d lcd: panel_type: lcd_1 [ 0.000000@0]d hdmitx: get hdmi checksum: 0x9f160000 [ 0.000000@0]d get_dolby_on: 0 [ 0.000000@0]d am_vecm: boot hdr_policy: 1 [ 0.000000@0]d vpp_axis_reverse: bootargs is 0 [ 0.000000@0]d DI: di_read_canvas_reverse: bootargs is 0. [ 0.000000@0]d phlock_phase_config: bootargs is 0. [ 0.000000@0]d vout: 1080p60hz [ 0.000000@0]d vout: en: 1 [ 0.000000@0]d fb: osd0 [ 0.000000@0]d fb: loaded [ 0.000000@0]d fb: 0x00300000 [ 0.000000@0]d am_vecm: boot hdr_policy: 1 [ 0.000000@0]d PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000@0]d Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000@0]d Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000@0]d Memory: 3157928K/3948544K available (13310K kernel code, 2370K rwdata, 5768K rodata, 5888K init, 1429K bss, 106584K reserved, 684032K cma-reserved) [ 0.000000@0]d Virtual kernel memory layout: [ 0.000000@0]d modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0]d vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0]d .text : 0xffffff8009080000 - 0xffffff8009d80000 ( 13312 KB) [ 0.000000@0]d .rodata : 0xffffff8009d80000 - 0xffffff800a330000 ( 5824 KB) [ 0.000000@0]d .init : 0xffffff800a330000 - 0xffffff800a8f0000 ( 5888 KB) [ 0.000000@0]d .data : 0xffffff800a8f0000 - 0xffffff800ab40808 ( 2371 KB) [ 0.000000@0]d .bss : 0xffffff800ab40808 - 0xffffff800aca5da4 ( 1430 KB) [ 0.000000@0]d fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000@0]d PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0]d vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0]d 0xffffffbf00000000 - 0xffffffbf03c40000 ( 60 MB actual) [ 0.000000@0]d memory : 0xffffffc000000000 - 0xffffffc0f1000000 ( 3856 MB) [ 0.000000@0]d SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0]d Preemptible hierarchical RCU implementation. [ 0.000000@0]d Build-time adjustment of leaf fanout to 64. [ 0.000000@0]d RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0]d RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0]d NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0]d irq_meson_gpio: 87 to 12 gpio interrupt mux initialized [ 0.000000@0]d meson_sc2_sdemmc_init: register amlogic sdemmc clk [ 0.000000@0]d meson_sc2_sdemmc_init: register amlogic sdemmc clk [ 0.000000@0]d sc2_clkc_init initialization complete [ 0.000000@0]d arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0]d clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0]d sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000026@0]d meson_bc_timer: mclk->mux_reg = (ptrval),mclk->reg = (ptrval) [ 0.000310@0]- Console: colour dummy device 80x25 [ 0.000314@0]- console [tty0] enabled [ 0.000316@0]- bootconsole [aml-uart0] disabled [ 0.000327@0]- Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.000331@0]- pid_max: default: 32768 minimum: 301 [ 0.000398@0]- Security Framework initialized [ 0.000404@0]- SELinux: Initializing. [ 0.000423@0]- SELinux: Starting in permissive mode [ 0.000443@0]- Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.000445@0]- Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.000917@0]- ftrace: allocating 42366 entries in 166 pages [ 0.047676@0]- sched-energy: CPU device node has no sched-energy-costs [ 0.059424@0]- ASID allocator initialised with 65536 entries [ 0.087864@0]- secmon: can't fine clear_range [ 0.089368@0]- chip version = 32:B - 2:0 [ 0.135834@1]d Detected VIPT I-cache on CPU1 [ 0.135877@1]d CPU1: Booted secondary processor [412fd050] [ 0.167868@2]d Detected VIPT I-cache on CPU2 [ 0.167904@2]d CPU2: Booted secondary processor [412fd050] [ 0.199912@3]d Detected VIPT I-cache on CPU3 [ 0.199944@3]d CPU3: Booted secondary processor [412fd050] [ 0.200003@0]- Brought up 4 CPUs [ 0.200006@0]- SMP: Total of 4 processors activated. [ 0.200010@0]- CPU features: detected feature: Privileged Access Never [ 0.200011@0]- CPU features: detected feature: User Access Override [ 0.200013@0]- CPU features: detected feature: Virtualization Host Extensions [ 0.200014@0]- CPU features: detected feature: 32-bit EL0 Support [ 0.200118@0]- CPU: All CPU(s) started at EL2 [ 0.200128@0]d alternatives: patching kernel code [ 0.201708@0]- devtmpfs: initialized [ 0.212623@0]- clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.212631@0]- futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.212746@0]- pinctrl core: initialized pinctrl subsystem [ 0.213468@0]- NET: Registered protocol family 16 [ 0.214246@2]- schedtune: init normalization constants... [ 0.214249@2]- schedtune: no energy model data [ 0.214250@2]- schedtune: disabled! [ 0.228082@2]- cpuidle: using governor menu [ 0.228134@2]- register canvas platform driver [ 0.228148@2]- register rdma platform driver [ 0.228965@2]- vdso: 2 pages (1 code @ (ptrval), 1 data @ (ptrval)) [ 0.228974@2]- hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.229679@2]- DMA: preallocated 2048 KiB pool for atomic allocations [ 0.229775@2]- clkmsr: clkmsr: driver init [ 0.229776@2]- codec_mm_module_init [ 0.229802@2]- media_configs_system_init [ 0.230260@2]- pstore: using zlib compression [ 0.230302@2]- console [pstore-1] enabled [ 0.230304@2]- pstore: Registered ramoops as persistent store backend [ 0.230306@2]- ramoops: attached 0x100000@0x8400000, ecc: 0/0 [ 0.231209@2]- meson_mhu_fifo: mhu fifo start [ 0.231231@2]- meson_mhu_fifo fe006000.mhu: no payload, only use fifo [ 0.231780@1]- meson_mhu_fifo: mbox fifo init done node:ffffffc0c5d02c10, mhuf:0x2 [ 0.232001@1]- meson_mhu_sec: mhu sec start [ 0.232252@1]- meson_mhu_sec: mbox sec init done 12051 node:ffffffc0c5dac010, mhuf:0xa [ 0.232494@1]- aml_iomap: amlogic iomap probe done [ 0.232856@1]- vpu: driver version: v20210916(13-sc2) [ 0.232872@1]- vpu: load vpu_clk: 666666667Hz(7) [ 0.233000@1]- vpu: clktree_init [ 0.233032@1]- vpu: vpu_probe OK [ 0.235101@1]- clkmsr: msr_clk_reg0= (ptrval),msr_clk_reg2= (ptrval) [ 0.235107@1]- clkmsr: msr_ring_reg0= (ptrval) [ 0.253042@1]- audio_clocks: audio_clocks_probe done [ 0.254185@1]- aml_snd_reg_map[0], reg:fe331000, size:400 [ 0.254195@1]- aml_snd_reg_map[1], reg:fe330000, size:1000 [ 0.254200@1]- aml_snd_reg_map[2], reg:fe331400, size:400 [ 0.254205@1]- aml_snd_reg_map[3], reg:fe332000, size:1000 [ 0.254211@1]- aml_snd_reg_map[4], reg:fe002000, size:1000 [ 0.254216@1]- aml_snd_reg_map[5], reg:fe331800, size:400 [ 0.254222@1]- aml_snd_reg_map[6], reg:fe331c00, size:104 [ 0.254227@1]- aml_snd_reg_map[7], reg:fe334000, size:104 [ 0.254229@1]- amlogic auge_snd_iomap probe done [ 0.254677@1]- vclk: aml_vclk_probe OK [ 0.254885@1]- aml_vdac_config_probe: cpu_id:8, name:meson-sc2-vdac [ 0.255018@1]- aml_vdac_probe: ok [ 0.255097@1]- canvas_probe reg= (ptrval),size=2000 [ 0.255107@1]- canvas maped reg_base = (ptrval) [ 0.256158@1]- rdma_probe,cpu_type:3, ver:1, len:16,rdma_table_size:65536 [ 0.256421@1]- rdma_register, rdma_table_addr (ptrval) rdma_table_addr_phy cb200000 reg_buf (ptrval) [ 0.256424@1]- rdma_register success, handle 1 table_size 65536 [ 0.256426@1]- set_rdma_handle video rdma handle = 1. [ 0.256444@1]- classs created ok [ 0.256450@1]- classs file created ok [ 0.258082@1]- cvbs_out: cvbsout_probe, cpu_id:8,name:meson-sc2-cvbsout [ 0.258088@1]- ERROR: could not get clock /cvbsout:venci_top_gate(0) [ 0.258108@1]- cvbs_out: error: cvbsout_clktree_probe: clk venci_top_gate [ 0.258117@1]- ERROR: could not get clock /cvbsout:venci_0_gate(1) [ 0.258124@1]- cvbs_out: error: cvbsout_clktree_probe: clk venci_0_gate [ 0.258132@1]- ERROR: could not get clock /cvbsout:venci_1_gate(2) [ 0.258139@1]- cvbs_out: error: cvbsout_clktree_probe: clk venci_1_gate [ 0.258147@1]- ERROR: could not get clock /cvbsout:vdac_clk_gate(3) [ 0.258154@1]- cvbs_out: error: cvbsout_clktree_probe: clk vdac_clk_gate [ 0.258162@1]- cvbs_out: clk path:0x0 [ 0.258164@1]- cvbs_out: find performance_pal config [ 0.258169@1]- cvbs_out: register cvbs module server ok [ 0.258170@1]- cvbs_out: register cvbs module vout2 server ok [ 0.258173@1]- cvbs_out: chrdev devno 262144000 for disp [ 0.258305@1]- cvbs_out: create cdev cvbs [ 0.258307@1]- cvbs_out: cvbsout_probe OK [ 0.258631@1]- codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma [ 0.258694@1]- codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma [ 0.258696@1]- codec_mm_probe ok [ 0.377653@1]- SCSI subsystem initialized [ 0.377758@1]- libata version 3.00 loaded. [ 0.377924@1]- usbcore: registered new interface driver usbfs [ 0.377953@1]- usbcore: registered new interface driver hub [ 0.377979@1]- usbcore: registered new device driver usb [ 0.378067@1]- pps_core: LinuxPPS API ver. 1 registered [ 0.378069@1]- pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.378081@1]- PTP clock support registered [ 0.380499@1]- secmon: share in base: 0xffffffc0050f9000, share out base: 0xffffffc0050ff000 [ 0.380502@1]- secmon: phy_in_base: 0x50f9000, phy_out_base: 0x50ff000 [ 0.380719@1]- fb: osd_init_module [ 0.380959@1]- fb: viu vsync irq: 37 [ 0.380981@1]- fb: viu2 vsync irq: 41 [ 0.380987@1]- fb: rdma irq: 47 [ 0.381298@1]- fb: osd_rdma_init: rdma_table p=0xcb210000,op=0xcb210000 , v=0x (ptrval) [ 0.381318@1]- rdma_register, rdma_table_addr (ptrval) rdma_table_addr_phy cb211000 reg_buf (ptrval) [ 0.381320@1]- rdma_register success, handle 2 table_size 4096 [ 0.381322@1]- fb: osd_rdma_init:osd rdma handle = 2. [ 0.381333@1]- fb: mem_size: 0x800000 [ 0.381334@1]- fb: mem_size: 0x4b80000 [ 0.381335@1]- fb: mem_size: 0x100000 [ 0.381336@1]- fb: mem_size: 0x100000 [ 0.381337@1]- fb: mem_size: 0x800000 [ 0.381402@1]- meson-fb fb: assigned reserved memory node linux,meson-fb [ 0.381405@1]- fb: reserved memory base:0x00000000f0800000, size:800000 [ 0.381532@1]- fb: init fbdev bpp is:32 [ 0.382302@3]- fb: set osd0 reverse as NONE [ 0.391164@3]- fb: osd probe OK [ 0.391664@3]- hdmitx: system: Ver: 20210902 [ 0.391688@3]- hdmitx: system: no hdmitx_i2c of pinctrl state [ 0.391790@3]- hdmitx: system: hpd irq = 36, viu1_vsync = 37 [ 0.391795@3]- ERROR: could not get clock /amhdmitx:hdmi_vapb_clk(3) [ 0.391816@3]- ERROR: could not get clock /amhdmitx:hdmi_vpu_clk(4) [ 0.391826@3]- ERROR: could not get clock /amhdmitx:venci_top_gate(0) [ 0.391834@3]- ERROR: could not get clock /amhdmitx:venci_0_gate(1) [ 0.391843@3]- ERROR: could not get clock /amhdmitx:venci_1_gate(2) [ 0.392147@3]- hdmitx: hw: avmute set to 1 [ 0.392203@3]- hdmitx: hdmitx_uboot_audio_en[604] data = 0x1f [ 0.393204@3]- vout sys: aml_vs_probe OK [ 0.393652@3]- hdmitx: hdmitx_set_current_vmode[5644] [ 0.393656@3]- hdmitx: system: recalc before 1080p60hz 60 1, frac 0 [ 0.393659@3]- hdmitx: system: recalc after 1080p60hz 60 1, frac 0 [ 0.393660@3]- hdmitx: alread display in uboot [ 0.393669@3]- hdmitx: system: update rx hdr info 0 [ 0.393672@3]- vout: init mode 1080p60hz set ok [ 0.393674@3]- fb: current vmode=1080p60hz, cmd: 0x60000 [ 0.393677@3]- vout sys: update date: 0x003c0001 [ 0.393679@3]- vout: aml_vout_probe OK [ 0.393923@3]- chip type:0x32 [ 0.393959@3]- can't find sec_base, set bytes_per_cycle to 16 [ 0.394224@3]- Advanced Linux Sound Architecture Driver Initialized. [ 0.394804@3]- NetLabel: Initializing [ 0.394806@3]- NetLabel: domain hash size = 128 [ 0.394808@3]- NetLabel: protocols = UNLABELED CIPSOv4 [ 0.394835@3]- NetLabel: unlabeled traffic allowed by default [ 0.395758@3]- clocksource: Switched to clocksource arch_sys_counter [ 0.427638@3]- VFS: Disk quotas dquot_6.6.0 [ 0.427686@3]- VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.427776@3]- FS-Cache: Loaded [ 0.434107@1]- NET: Registered protocol family 2 [ 0.459840@1]- TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.459949@1]- TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.460292@1]- TCP: Hash tables configured (established 32768 bind 32768) [ 0.460350@1]- UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.460381@1]- UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.460546@1]- NET: Registered protocol family 1 [ 0.460793@1]- RPC: Registered named UNIX socket transport module. [ 0.460795@1]- RPC: Registered udp transport module. [ 0.460796@1]- RPC: Registered tcp transport module. [ 0.460798@1]- RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.460805@1]- PCI: CLS 0 bytes, default 64 [ 0.462036@1]- Wifi: bcmdhd_init_wlan_mem: [dhd] STATIC-MSG) bcmdhd_init_wlan_mem : 101.10.361.10 (wlan=r892223-20210623-1) [ 0.462374@1]- Wifi: bcmdhd_init_wlan_mem: [dhd] STATIC-MSG) bcmdhd_init_wlan_mem : prealloc ok: 8162304(7971K) [ 0.463126@1]- Unpacking initramfs... [ 0.478710@1]- Freeing initrd memory: 6112K [ 0.479321@1]- unifykey: normal key used! [ 0.479515@1]- unifykey: no efuse-version set, use default value: -1 [ 0.479728@1]- unifykey: aml_unifykeys_init done! [ 0.480567@1]- hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.482015@1]- audit: initializing netlink subsys (disabled) [ 0.482052@1]- audit: type=2000 audit(0.444:1): initialized [ 0.482520@1]- workingset: timestamp_bits=45 max_order=20 bucket_order=0 [ 0.487242@1]- squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.487616@1]- FS-Cache: Netfs 'nfs' registered for caching [ 0.488006@1]- NFS: Registering the id_resolver key type [ 0.488023@1]- Key type id_resolver registered [ 0.488024@1]- Key type id_legacy registered [ 0.488031@1]- nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.488033@1]- nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.488153@1]- FS-Cache: Netfs 'cifs' registered for caching [ 0.488629@1]- SELinux: Registering netfilter hooks [ 0.490967@1]- NET: Registered protocol family 38 [ 0.490976@1]- Key type asymmetric registered [ 0.490978@1]- Asymmetric key parser 'x509' registered [ 0.491118@1]- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.491123@1]- io scheduler noop registered (default) [ 0.491125@1]- io scheduler deadline registered [ 0.491204@1]- io scheduler cfq registered [ 0.493066@3]d random: fast init done [ 0.493098@3]- random: crng init done [ 0.493113@1]- [drm] Initialized [ 0.493184@1]- Unable to detect cache hierarchy for CPU 0 [ 0.495833@1]- loop: module loaded [ 0.496721@1]- mtdoops: mtd device (mtddev=name/number) must be supplied [ 0.497155@1]- libphy: Fixed MDIO Bus: probed [ 0.498203@1]- Miss mc_val for REG0 [ 0.498209@1]- auto_cali_idx 1 [ 0.498629@1]- meson6-dwmac fdc00000.ethernet: no reset control found [ 0.498632@1]- stmmac - user ID: 0x11, Synopsys ID: 0x37 [ 0.498634@1]- Ring mode enabled [ 0.498636@1]- DMA HW capability register supported [ 0.498638@1]- Normal descriptors [ 0.498640@1]- RX Checksum Offload Engine supported [ 0.498641@1]- COE Type 2 [ 0.498642@1]- TX Checksum insertion supported [ 0.498643@1]- Wake-Up On Lan supported [ 0.498666@1]- Enable RX Mitigation via HW Watchdog Timer [ 0.498966@1]- libphy: yzhang..read phyaddr=2, phyid=d565a401 [ 0.501559@1]- libphy: stmmac: probed [ 0.501565@1]- eth%d: PHY ID d565a401 at 2 IRQ POLL (stmmac-0:02) active [ 0.502715@1]- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.502738@1]- ehci-pci: EHCI PCI platform driver [ 0.502772@1]- ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.502780@1]- ohci-pci: OHCI PCI platform driver [ 0.503061@1]- usbcore: registered new interface driver cdc_acm [ 0.503063@1]- cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 0.503094@1]- usbcore: registered new interface driver usb-storage [ 0.503154@1]- usbcore: registered new interface driver usbserial [ 0.503180@1]- usbcore: registered new interface driver usbserial_generic [ 0.503199@1]- usbserial: USB Serial support registered for generic [ 0.503466@1]- mousedev: PS/2 mouse device common for all mice [ 0.503673@1]- i2c /dev entries driver [ 0.504969@1]- ledtrig-cpu: registered to indicate activity on CPUs [ 0.505211@1]- hidraw: raw HID events driver (C) Jiri Kosina [ 0.505438@1]- usbcore: registered new interface driver usbhid [ 0.505440@1]- usbhid: USB HID core driver [ 0.505952@1]- value of voltage_tolerance 0 [ 0.505954@1]- meson_cpufreq_init:don't find the node [ 0.505973@1]- value of gp1_clk_target 0 [ 0.506582@1]- cpu cpu0: meson_cpufreq_init: CPU 0 initialized [ 0.506605@1]- cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1992000 KHz [ 0.507738@1]- cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 2000000 KHz [ 0.508293@1]- fe07a000.serial: clock gate not found [ 0.508343@1]- meson_uart fe07a000.serial: ==uart0 reg addr = 00000000612c67ca [ 0.508372@1]- fe07a000.serial: ttyS0 at MMIO 0xfe07a000 (irq = 23, base_baud = 1500000) is a meson_uart [ 0.508382@1]- meson_uart fe07a000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 921600 [ 0.523284@3]d hdmitx: edid: EDID Parser: [ 0.523301@3]d hdmitx: Edid_ParsingVendSpec:ieeeoui=0xd046,len=14 [ 0.523304@3]d hdmitx: v1 VSVDB: len=14, sup_2160p60hz=0 [ 0.523305@3]d hdmitx: Edid_ParsingVendSpec:ieeeoui=0xd046,len=14 [ 0.523306@3]d hdmitx: v1 VSVDB: len=14, sup_2160p60hz=0 [ 0.523318@3]d hdmitx: edid: get dtd0 vic: 781 [ 0.523327@3]d hdmitx: edid: get dtd1 vic: 97 [ 0.523328@3]d hdmitx: edid: get dtd2 vic: 16 [ 0.523330@3]d hdmitx: hdmitx: get PMT vic: 97 [ 0.523332@3]d hdmitx: edid: find IEEEOUT [ 0.523343@3]- hdmitx: edid: blk0 raw data [ 0.523361@3]- hdmitx: edid: [ 0.523361@3]- 00ffffffffffff001e6d010001010101011a010380a05a780aee91a3544c9926 [ 0.523361@3]- 0f5054a108003140454061407140818001010101010108e80030f2705a80b058 [ 0.523361@3]- 8a0040846300001e023a801871382d40582c450040846300001e000000fd003a [ 0.523361@3]- 3e1e883c000a202020202020000000fc004c472054560a20202020202020019f [ 0.523361@3]- [ 0.523361@3]- [ 0.523363@3]- hdmitx: edid: blk1 raw data [ 0.523380@3]- hdmitx: edid: [ 0.523380@3]- 020367f1586160101f0413051403021220212215015d5e5f6566626364293d06 [ 0.523380@3]- c015075009570778030c001000b83c20c08a010203040140fff0281038102636 [ 0.523380@3]- 67d85dc401788003e200cfe305c000e3060d01e40f030018ee0146d000241809 [ 0.523380@3]- 00ad5244a9230c662150b051001b304070360040846300001e00000000000016 [ 0.523380@3]- [ 0.523380@3]- [ 0.523384@3]- hdmitx: system: update rx hdr info d [ 0.523550@3]- hdmitx: hdmitx: get vic 95 cscd [ 0.523552@3]- hdmitx: hdmitx: mode name 3840x2160p30hz [ 0.523559@3]- hdmitx: hdmitx: tmds clock 297 [ 0.523560@3]- hdmitx: hdmitx: act clock: 297 [ 0.523567@0]h hdmitx: system: irq 80000002 0 [ 0.531708@1]- console [ttyS0] enabled [ 0.532201@1]- meson_uart fe080000.serial: ==uart1 reg addr = 000000002add3cfd [ 0.532231@1]- fe080000.serial: ttyS1 at MMIO 0xfe080000 (irq = 35, base_baud = 1500000) is a meson_uart [ 0.533099@1]- amlogic-new-usb2-v2 fe03a000.usb2phy: USB2 phy probe:phy_mem:0xfe03a000, iomap phy_base:0xffffff80084c5000 [ 0.533305@1]- amlogic-new-usb3-v2 fe03a080.usb3phy: USB3 phy probe:phy_mem:0xfe03a080, iomap phy_base:0xffffff80084cd080 [ 0.535183@1]- aml_dma fe440400.aml_dma: Aml dma [ 0.536538@1]- aml_aes_dma fe440400.aml_dma:aml_aes: Aml AES_dma [ 0.537197@3]- aml_tdes_dma fe440400.aml_dma:aml_tdes: Aml TDES_dma [ 0.537557@3]- aml_sha_dma fe440400.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 0.537858@3]- aml_crypto_dev fe440400.aml_dma:crypto: Aml crypto device [ 0.538035@3]- gpio-keypad gpio_keypad: bluetooth key(600) registed. [ 0.538127@3]- input: gpio_keypad as /devices/platform/gpio_keypad/input/input0 [ 0.538407@3]- Enable disable_nonboot_cpus in syscore shutdown. [ 0.539618@3]- ion_dev soc:ion_dev: assigned reserved memory node linux,ion-dev [ 0.539636@3]- ion-dev: failed get fb memory [ 0.539645@3]- ion-dev: failed get secure memory [ 0.539887@3]- ion-dev: add heap type:0 id:0 [ 0.539940@3]- ion-dev: add heap type:5 id:5 [ 0.539989@3]- ion-dev: add heap type:4 id:4 [ 0.539991@3]- ion-dev: dev_ion_probe, create 3 heaps [ 0.540147@3]- ge2d: ge2d_init_module [ 0.542037@3]- ge2d: ge2d clock is 499 MHZ [ 0.542058@3]- ge2d: reserved mem is not used [ 0.542087@3]- ge2d: ge2d start monitor [ 0.542508@3]- new arch is :1. [ 0.542572@3]- [tsync_pcr_init]init success. [ 0.542795@3]- warning: film grain not support! [ 0.542796@3]- warning: film grain not support! [ 0.542819@3]- amvideom vsync irq: 37, cpu_type:3 [ 0.542824@3]- amvideom vsync viu2 irq: 41 [ 0.542845@3]- create_ge2d_work_queue video task ok [ 0.543323@3]- create_video_receiver video_render.0 00000000c40bb0f4, path_id:2 success [ 0.543327@3]- create_video_receiver video_render.1 000000006c330ca3, path_id:3 success [ 0.543609@3]- amvideocap_probe,amvideocap [ 0.543640@3]- use cma buf. [ 0.543921@3]- hdmitx: hdcp: hdmitx_hdcp_init [ 0.544351@3]- DI: di_module_init ok. [ 0.544456@3]- dim:dim_module_init [ 0.544754@3]- dim:dim_probe: [ 0.545022@3]- dev_vframe_init finish [ 0.545556@3]- dim:match name: dim_sc2:id[37] [ 0.545652@3]- dim:no reserved mem. [ 0.545681@3]- dim:pre_irq:57 [ 0.545685@3]- dim:post_irq:58 [ 0.545689@3]- dim:no aisr_irq [ 0.545714@3]- DI: vpu clkb <334000000, 667000000> [ 0.545726@3]- dim:vpu clkb =666666656. [ 0.545817@3]- dim:afbc_prob:ver[5],_sc2,mode[2] [ 0.545819@3]- dim:init ops:37:l1_sc2 [ 0.545830@3]- dim:cvs inp:0xdf~0xe0~0xe1. [ 0.545878@3]- dim:hw_init_v3: [ 0.545881@3]- dim: 0x17c5:0x1 [ 0.545882@3]- dim: 0x17c6:0x1 [ 0.545883@3]- dim: 0x1730:0xc3fe0000 [ 0.545971@3]- . [ 0.546045@3]- . [ 0.546120@3]- dim:dim_probe:ok [ 0.546255@3]- dim:dim_module_init finish [ 0.546259@3]- dil:dil_init. [ 0.546490@3]- dil:dil_init ok. [ 0.546662@3]- Reserved memory: failed to init DMA memory pool at 0x00000000e8800000, size 0 MiB [ 0.547092@3]- PPMGRDRV: info: ppmgr_dev major:506 [ 0.547313@3]- aml_vecm_init:module init [ 0.547482@3]- VECM probe start [ 0.547697@3]- Can't find tv_mode. [ 0.547700@3]- Can't find lut3d_en. [ 0.547704@3]- Can't find blue stretch en. [ 0.547718@3]- aml_iomap: write cbus reg f2 error -1 [ 0.547799@3]- vlock clk not cfg [ 0.548101@3]- aml_iomap: read cbus reg 20 error -1 [ 0.548706@3]- aml_iomap: read cbus reg 21 error -1 [ 0.563865@3]- aml_iomap: read cbus reg d1 error -1 [ 0.563893@3]- aml_iomap: write cbus reg d1 error -1 [ 0.564400@3]- aml_iomap: read cbus reg d1 error -1 [ 0.565007@3]- aml_iomap: write cbus reg d1 error -1 [ 0.565627@3]- vlock_status_init vlock_en:1 [ 0.565738@3]- aml_vecm_probe: ok [ 0.565810@3]- amdolby_vision_init:module init [ 0.566151@3]- [ 0.566151@3]- amdolby_vision probe start & ver: 20181220 [ 0.566155@3]- [ 0.566155@3]- cpu_id=5 tvmode=0 [ 0.566318@3]- dolby_vision_init_receiver(dvel) [ 0.566325@3]- dolby_vision_init_receiver: dvel [ 0.566531@3]- amdolby_vision_probe: ok [ 0.566540@3]- g12 dovi disable in uboot [ 0.567150@3]- meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller [ 0.591386@0]h hdmitx: hdmitx_set_drm_pkt: tf=1, cf=1, colormetry=0 [ 0.607776@3]- meson-mmc: meson_mmc_probe() : success! [ 0.614455@2]- meson-mmc: gpio_cd = 1c1 [ 0.651775@2]- meson-mmc: meson_mmc_probe() : success! [ 0.691773@2]- meson-mmc: meson_mmc_probe() : success! [ 0.693661@2]- input: cec_input as /devices/virtual/input/input1 [ 0.694038@2]- get B default state [ 0.694072@2]- cectx fe044000.aocec: not find 'arc_port_mask' [ 0.709054@2]- cectx fe044000.aocec: wakeup_reason:0x0 [ 0.723362@3]- meson-mmc: emmc: clk 199999997 tuning start [ 0.726932@3]- meson-mmc: emmc: adj_win: < 0 2 3 4 > [ 0.726937@3]- meson-mmc: step:4, delay1:0x4104104, delay2:0x4004104 [ 0.730424@3]- meson-mmc: emmc: adj_win: < 0 2 3 4 > [ 0.730427@3]- meson-mmc: step:8, delay1:0x8208208, delay2:0x8008208 [ 0.731163@2]- cectx fe044000.aocec: wakeup_data: 0x0 0x0 [ 0.731623@2]- meson ts init [ 0.731683@2]- tsensor id: 0 [ 0.731825@2]- r1p1_tsensor_read valid cnt is 0 [ 0.731835@2]- tsensor trim info: 0xfa00005f! [ 0.731837@2]- tsensor hireboot: 0xc0ff2990 [ 0.731899@2]- meson ts init [ 0.731914@2]- tsensor id: 1 [ 0.731970@2]- r1p1_tsensor_read valid cnt is 0 [ 0.731978@2]- tsensor trim info: 0xfa0000b0! [ 0.731979@2]- tsensor hireboot: 0xc0ff2950 [ 0.732086@2]- audio_dsp: [dsp]register dsp to char divece(257) [ 0.732295@2]- amaudio: amaudio: driver amaudio init! [ 0.732640@2]- amaudio: amaudio_init - amaudio: driver amaudio succuess! [ 0.733309@2]- sysled: module init [ 0.733531@2]- meson_wdt fe002100.watchdog: start watchdog [ 0.733534@2]- meson_wdt fe002100.watchdog: create hrtimer for watch dog [ 0.733728@2]- meson_wdt fe002100.watchdog: AML Watchdog Timer probed done [ 0.734186@2]- not get gpio_en [ 0.734190@2]- not get gpio_btwakeup [ 0.734293@2]- request_irq error ret=-22 [ 0.734353@2]- dev_pm_set_wake_irq failed: -22 [ 0.734634@3]- meson-mmc: emmc: adj_win: < 0 1 2 3 4 > [ 0.734637@3]- meson-mmc: step:12, delay1:0xc30c30c, delay2:0xc00c30c [ 0.734734@2]- input: input_btrcu as /devices/platform/bt-dev/input/input2 [ 0.735243@2]- meson-saradc fe026000.saradc: set delay per tick to <1ms> by default. [ 0.735247@2]- meson-saradc fe026000.saradc: set ticks per period to <1> by default. [ 0.736066@2]- dmc_monitor_probe [ 0.737313@2]- aml_aucpu aucpu: Direct firmware load for aucpu_fw.bin failed with error -2 [ 0.737318@2]- load aucpu_fw.bin fail [ 0.737319@2]- load start_aucpu_fw fail [ 0.737584@2]- socdata fe010000.soc_info: socdata_devno:1f200000 [ 0.737880@2]- bl301_manager: driver init [ 0.738181@2]- usbcore: registered new interface driver snd-usb-audio [ 0.739078@2]- aml_codec_T9015 fe01a000.t9015: aml_T9015_audio_codec_probe [ 0.739100@2]- T9015 acodec used by auge, tdmout:1 [ 0.739220@3]- meson-mmc: emmc: adj_win: < 0 1 2 3 4 > [ 0.739223@3]- meson-mmc: step:16, delay1:0x10410410, delay2:0x10010410 [ 0.740854@2]- asoc debug: aml_audio_controller_probe-129 [ 0.741380@2]- aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 0.741391@2]- TDM id 1 samesource_sel:3 [ 0.741400@2]- snd_tdm fe330000.audiobus:tdm@1: lane_mask_out = 1, lane_oe_mask_out = 0 [ 0.741584@2]- TDM id 1 output clk enable:1 [ 0.741605@2]- No channel mask node Channel_Mask [ 0.741619@2]- TDM id 1 tuning clk enable:1 [ 0.741670@2]- aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 0.741679@2]- TDM id 2 i2s2hdmi:1 [ 0.741685@2]- snd_tdm fe330000.audiobus:i2s2hdmi: lane_mask_out = f, lane_oe_mask_out = 0 [ 0.741733@2]- snd_tdm fe330000.audiobus:i2s2hdmi: neither mclk_pad nor mclk2pad set [ 0.741739@2]- snd_tdm fe330000.audiobus:i2s2hdmi: aml_tdm_get_pins error! [ 0.741741@2]- No channel mask node Channel_Mask [ 0.742193@2]- aml_spdif_platform_probe, spdif ID = 0 [ 0.742536@2]- Spdif id 0 tuning clk enable:1 [ 0.742575@2]- aml_spdif_platform_probe, spdif ID = 1 [ 0.742588@2]- snd_spdif fe330000.audiobus:spdif@1: spdif 1 has no pinctrl! [ 0.742852@3]- meson-mmc: emmc: adj_win: < 0 1 3 4 > [ 0.742857@3]- meson-mmc: left:3, right:0, mid:4, size:4 [ 0.742860@3]- meson-mmc: step:0, delay1:0x0, delay2:0x0 [ 0.742863@3]- meson-mmc: emmc: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x42000 [ 0.742947@3]- emmc: new HS200 MMC card at address 0001 [ 0.742949@2]- emmc: clock 199999997, 8-bit-bus-width [ 0.742949@2]- [ 0.743195@2]- audio-ddr-manager fe330000.audiobus:ddr_manager: 0, irqs toddr 24, frddr 28 [ 0.743207@2]- audio-ddr-manager fe330000.audiobus:ddr_manager: 1, irqs toddr 25, frddr 29 [ 0.743217@2]- audio-ddr-manager fe330000.audiobus:ddr_manager: 2, irqs toddr 26, frddr 30 [ 0.743227@2]- audio-ddr-manager fe330000.audiobus:ddr_manager: 3, irqs toddr 27, frddr 31 [ 0.743281@3]- mmcblk0: emmc:0001 A3A561 57.6 GiB [ 0.743394@3]- mmcblk0boot0: emmc:0001 A3A561 partition 1 4.00 MiB [ 0.743546@3]- mmcblk0boot1: emmc:0001 A3A561 partition 2 4.00 MiB [ 0.743554@2]- datain_src:4, datain_chnum:2, datain_chumask:3 [ 0.743555@2]- datalb_src:1, datalb_chnum:2, datalb_chmask:3 [ 0.743557@2]- datain_lane_mask:0x1, datalb_lane_mask:0x1 [ 0.743558@2]- datalb_format: 1, chmask for lanes: 0x3 [ 0.743653@3]- mmcblk0rpmb: emmc:0001 A3A561 partition 3 16.0 MiB [ 0.743951@2]- loopback_platform_probe, p_loopback->id:0 register soc platform [ 0.744355@2]- audiolocker_platform_probe [ 0.744359@2]- ERROR: could not get clock /locker:lock_in(1) [ 0.744403@2]- audiolocker locker: Can't retrieve lock_in clock [ 0.744636@3]- meson-mmc: Enter aml_emmc_partition_ops [ 0.745132@2]- audiolocker: probe of locker failed with error -2 [ 0.745484@2]- effect_platform_probe, line:607 [ 0.745670@2]- eqdrc_clk_set, src pll:399999993, clk:199999997 [ 0.745673@2]- effect_platform_probe module:1, lane_mask:1, ch_mask:3 [ 0.746172@2]- vad_platform_probe, failed to get vad wakeup sample rate [ 0.746315@2]- vad_platform_probe, vad wakeup sample rate = 16000 [ 0.746469@2]- vad_platform_probe vad data source sel:4, level:1 [ 0.746574@2]- input: vad_keypad as /devices/platform/soc/fe330000.audiobus/fe330000.audiobus:vad/input/input3 [ 0.746968@2]- Register vad [ 0.747175@2]- asoc-aml-card auge_sound: link 0: [ 0.747258@2]- asoc-aml-card auge_sound: name : SPDIF-B-SPDIF-B [ 0.747261@2]- asoc-aml-card auge_sound: format : 4000 [ 0.747263@2]- asoc-aml-card auge_sound: cpu : SPDIF-B / 6144000 [ 0.747266@2]- asoc-aml-card auge_sound: codec : SPDIF-B / 0 [ 0.747268@2]- asoc-aml-card auge_sound: link 1: [ 0.747367@2]- asoc-aml-card auge_sound: name : TDM-B-T9015-audio-hifi [ 0.747370@2]- asoc-aml-card auge_sound: format : 4001 [ 0.747372@2]- asoc-aml-card auge_sound: cpu : TDM-B / 12288000 [ 0.747374@2]- asoc-aml-card auge_sound: codec : T9015-audio-hifi / 0 [ 0.747377@2]- asoc-aml-card auge_sound: link 2: [ 0.747414@2]- asoc-aml-card auge_sound: name : SPDIF-A-SPDIF-A [ 0.747416@2]- asoc-aml-card auge_sound: format : 4000 [ 0.747418@2]- asoc-aml-card auge_sound: cpu : SPDIF-A / 6144000 [ 0.747420@2]- asoc-aml-card auge_sound: codec : SPDIF-A / 0 [ 0.747422@2]- asoc-aml-card auge_sound: link 3: [ 0.747482@2]- asoc-aml-card auge_sound: name : TDM-C-dummy [ 0.747484@2]- asoc-aml-card auge_sound: format : 4001 [ 0.747486@2]- asoc-aml-card auge_sound: cpu : TDM-C / 12288000 [ 0.747488@2]- asoc-aml-card auge_sound: codec : dummy / 0 [ 0.747635@2]- call standard reset interface [ 0.747787@3]- meson-mmc: [mmc_read_partition_tbl] mmc read partition OK! [ 0.747788@3]- meson-mmc: add_emmc_partition [ 0.749376@3]- card key: card_blk_probe. [ 0.749381@3]- emmc_key_init:493 emmc key lba_start:0x12020,lba_end:0x12422 [ 0.751324@3]- calc c455e302f7, store c455e302f7 [ 0.753188@3]- calc c455e302f7, store c455e302f7 [ 0.753191@3]- do nothing [ 0.753198@3]- emmc key: emmc_key_init:519 ok. [ 0.753201@3]- meson-mmc: amlmmc_dtb_init: register dtb chardev [ 0.756702@3]- meson-mmc: total valid 2 [ 0.756882@3]- meson-mmc: amlmmc_dtb_init: register dtb chardev OK [ 0.756885@3]- meson-mmc: amlmmc_ddr_init: register ddr_parameter chardev [ 0.756988@3]- meson-mmc: amlmmc_ddr_init: register ddr parameter chardev OK [ 0.757011@3]- meson-mmc: Exit aml_emmc_partition_ops OK. [ 0.855806@2]- meson-mmc: card IN [ 0.855843@2]- meson-mmc: normal card in [ 0.951787@2]- aml_codec_T9015 fe01a000.t9015: ASoC: no source widget found for Left DAC [ 0.952114@2]- aml_codec_T9015 fe01a000.t9015: ASoC: Failed to add route Left DAC -> LOLP_SEL_DACL -> Lineout left P switch [ 0.953499@2]- aml_codec_T9015 fe01a000.t9015: ASoC: no source widget found for Left DAC [ 0.954507@2]- aml_codec_T9015 fe01a000.t9015: ASoC: Failed to add route Left DAC -> LOLP_SEL_DACL_INV -> Lineout left P switch [ 0.955956@2]- aml_codec_T9015 fe01a000.t9015: ASoC: no source widget found for Left DAC [ 0.956944@2]- aml_codec_T9015 fe01a000.t9015: ASoC: Failed to add route Left DAC -> LOLN_SEL_DACL_INV -> Lineout left N switch [ 0.958374@2]- aml_codec_T9015 fe01a000.t9015: ASoC: no source widget found for Left DAC [ 0.959382@2]- aml_codec_T9015 fe01a000.t9015: ASoC: Failed to add route Left DAC -> LOLN_SEL_DACL -> Lineout left N switch [ 0.960854@2]- aml_codec_T9015 fe01a000.t9015: ASoC: no source widget found for Right DAC [ 0.961787@2]- aml_codec_T9015 fe01a000.t9015: ASoC: Failed to add route Right DAC -> LORP_SEL_DACR -> Lineout right P switch [ 0.963195@2]- aml_codec_T9015 fe01a000.t9015: ASoC: no source widget found for Right DAC [ 0.964223@2]- aml_codec_T9015 fe01a000.t9015: ASoC: Failed to add route Right DAC -> LORP_SEL_DACR_INV -> Lineout right P switch [ 0.965665@2]- aml_codec_T9015 fe01a000.t9015: ASoC: no source widget found for Right DAC [ 0.966683@2]- aml_codec_T9015 fe01a000.t9015: ASoC: Failed to add route Right DAC -> LORN_SEL_DACR_INV -> Lineout right N switch [ 0.968142@2]- aml_codec_T9015 fe01a000.t9015: ASoC: no source widget found for Right DAC [ 0.969154@2]- aml_codec_T9015 fe01a000.t9015: ASoC: Failed to add route Right DAC -> LORN_SEL_DACR -> Lineout right N switch [ 0.970707@2]- asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 0.971538@2]- snd_tdm fe330000.audiobus:i2s2hdmi: ASoC: Failed to add I2SIn CLK: -16 [ 0.972522@2]- aml_dai_tdm_probe, failed add snd tdm controls [ 0.973303@2]- aml_spdif_new spdif_b, clk continuous:1 [ 0.973305@2]- spdifout_play_with_zerodata_free, spdif id:1 [ 0.973313@2]- asoc-aml-card auge_sound: SPDIF-B <-> SPDIF-B mapping ok [ 0.973317@2]- aml_dai_set_tdm_slot(), txmask(0x3), rxmask(0x3) [ 0.973319@2]- lanes_out_cnt(1), lanes_in_cnt(1) [ 0.973320@2]- lanes_lb_cnt(0) [ 0.973322@2]- slots(2), slot_width(32) [ 0.973324@2]- lanes_oe_out_cnt(0), lanes_oe_in_cnt(0) [ 0.973334@2]- asoc aml_dai_set_tdm_fmt, 0x4001, 000000004612cb3e, id(1), clksel(1) [ 0.973338@2]- master_mode(1), binv(1), finv(1) out_skew(2), in_skew(3) [ 0.973404@2]- asoc-aml-card auge_sound: T9015-audio-hifi <-> TDM-B mapping ok [ 0.973457@2]- aml_spdif_new spdif_a, clk continuous:1 [ 0.973459@2]- spdifout_play_with_zerodata_free, spdif id:0 [ 0.973466@2]- audio_ddr_mngr: frddr stop success, fifo id 0, regbase:0x70, arb sts:0x40000010 [ 0.973470@2]- asoc-aml-card auge_sound: SPDIF-A <-> SPDIF-A mapping ok [ 0.973473@2]- aml_dai_set_tdm_slot(), txmask(0x3), rxmask(0x3) [ 0.973475@2]- lanes_out_cnt(4), lanes_in_cnt(0) [ 0.973476@2]- lanes_lb_cnt(0) [ 0.973477@2]- slots(2), slot_width(32) [ 0.973479@2]- lanes_oe_out_cnt(0), lanes_oe_in_cnt(0) [ 0.973483@2]- asoc aml_dai_set_tdm_fmt, 0x4001, 0000000060ce2097, id(2), clksel(2) [ 0.973487@2]- master_mode(1), binv(1), finv(1) out_skew(2), in_skew(3) [ 0.973549@2]- asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 0.973591@2]- aml_codec_T9015 fe01a000.t9015: ASoC: mux Lineout left P switch has no paths [ 0.974272@2]- aml_codec_T9015 fe01a000.t9015: ASoC: mux Lineout left N switch has no paths [ 0.975311@2]- aml_codec_T9015 fe01a000.t9015: ASoC: mux Lineout right P switch has no paths [ 0.976384@2]- aml_codec_T9015 fe01a000.t9015: ASoC: mux Lineout right N switch has no paths [ 0.978306@2]- snd_card_add_kcontrols card:00000000a362d45a [ 0.978359@2]- eq/drc v1 function enable [ 0.978365@2]- no node audio_effect for eq/drc info! [ 0.978366@2]- Failed to add audio effects v1 controls [ 0.978618@2]- Initializing XFRM netlink socket [ 0.978628@2]- IPsec XFRM device driver [ 0.978915@2]- NET: Registered protocol family 10 [ 0.979455@2]- NET: Registered protocol family 17 [ 0.979499@2]- Key type dns_resolver registered [ 0.980434@2]- Registered swp emulation handler [ 0.980443@2]- Registered cp15_barrier emulation handler [ 0.980449@2]- Registered setend emulation handler [ 0.980478@2]- disable EAS feature [ 0.980911@2]- registered taskstats version 1 [ 0.989030@1]- dwc3 fde00000.dwc3: Configuration mismatch. dr_mode forced to host [ 0.991793@1]- xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 0.991810@1]- xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 0.992074@1]- xhci-hcd xhci-hcd.0.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x20810010 [ 0.992108@1]- xhci-hcd xhci-hcd.0.auto: irq 17, io mem 0xfde00000 [ 0.992209@1]- usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.992212@1]- usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.992215@1]- usb usb1: Product: xHCI Host Controller [ 0.992217@1]- usb usb1: Manufacturer: Linux 4.9.269 xhci-hcd [ 0.992219@1]- usb usb1: SerialNumber: xhci-hcd.0.auto [ 0.992605@2]- hub 1-0:1.0: USB hub found [ 0.992625@2]- hub 1-0:1.0: 2 ports detected [ 0.992835@2]- xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 0.992843@2]- xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 0.992882@2]- usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.992939@2]- usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.992942@2]- usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.992945@2]- usb usb2: Product: xHCI Host Controller [ 0.992947@2]- usb usb2: Manufacturer: Linux 4.9.269 xhci-hcd [ 0.992949@2]- usb usb2: SerialNumber: xhci-hcd.0.auto [ 0.993260@3]- hub 2-0:1.0: USB hub found [ 0.993277@3]- hub 2-0:1.0: 1 port detected [ 0.993702@3]- hctosys: unable to open rtc device (rtc0) [ 0.993975@3]- dwc_otg fdd00000.dwc2_a: dwc_otg_driver_probe(00000000e582a4e2) [ 0.993996@3]- dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: fe03a000, ctrl: 0 [ 0.994012@3]- dwc_otg fdd00000.dwc2_a: base=0xffffff8008e00000 [ 0.994015@3]- dwc_otg fdd00000.dwc2_a: dwc_otg_device=0x000000001593080c [ 1.028148@1]- hdmitx: system: plugin [ 1.043388@2]- sd: new high speed SDHC card at address 0001 [ 1.043391@2]- sd: clock 50000000, 4-bit-bus-width [ 1.043391@2]- [ 1.047721@2]- mmcblk1: sd:0001 SD 7.38 GiB [ 1.048940@2]- mmcblk1: p1 p2 [ 1.094199@2]- dwc_otg: Core Release: 3.30a [ 1.094205@2]- dwc_otg: Setting default values for core params [ 1.094214@2]- dwc_otg: curmode: 0, host_only: 0 [ 1.094230@2]- dwc_otg fdd00000.dwc2_a: DMA config: BURST_DEFAULT [ 1.106409@2]- dwc_otg: Using Buffer DMA mode [ 1.106412@2]- dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 1.106415@2]- dwc_otg: Working on port type = SLAVE [ 1.106418@2]- dwc_otg: Dedicated Tx FIFOs mode [ 1.108297@2]- meson_cdev probe [ 1.108455@2]- meson_cdev index: 0 [ 1.108613@2]- meson_cdev index: 1 [ 1.108619@2]- cpucore_cooling_register, max_cpu_core_num:4 [ 1.108679@2]- meson_cdev index: 2 [ 1.108695@2]- meson_cdev index: 3 [ 1.108725@2]- find tzd id: 0 [ 1.108830@2]- meson_cdev set min sussces [ 1.108831@2]- meson_cdev probe done [ 1.108968@2]- gxbb_pm: enter meson_pm_probe! [ 1.108972@2]- no vddio3v3_en pin [ 1.108982@2]- pm-meson aml_pm: Can't get switch_clk81 [ 1.109044@2]- gxbb_pm: meson_pm_probe done [ 1.109423@2]- ALSA device list: [ 1.109425@2]- #0: AML-AUGESOUND [ 1.111298@2]- Freeing unused kernel memory: 5888K [ 1.141327@3]- fb: malloc_osd_memory, cma:ffffff800abfb698 [ 1.141333@3]- fb: malloc_osd_memory, 1224, base:0x00000000f0800000, size:8388608 [ 1.141354@3]- fb: use ion buffer for fb memory, fb_index=0 [ 1.141356@3]- fb: OSD0 as afbcd mode,afbc_type=2 [ 1.158266@3]- meson-fb fb: create ion_client ffffffc0c44d8780, handle=00000000379827ba [ 1.158598@3]- meson-fb fb: ion memory(0): created fb at 0x00000000e8800000, size 75 MiB [ 1.159600@3]- fb: 0, phy: 0x00000000e8800000, vir:0xffffff800acab000, size=77312K [ 1.159600@3]- [ 1.159602@3]- fb: Frame buffer memory assigned at [ 1.159605@3]- fb: 0, phy: 0x00000000e8800000, vir:0xffffff800acab000, size=77312K [ 1.159605@3]- [ 1.159607@3]- fb: 0, phy: 0x00000000e8800000, vir:0xffffff800acab000, size=77312K [ 1.159607@3]- [ 1.159609@3]- fb: logo_index=0,fb_index=0 [ 1.159611@3]- fb: ---------------clear fb0 memory 0000000062d96f51 [ 1.159695@1]d hdmitx: edid: EDID Parser: [ 1.159718@1]d hdmitx: Edid_ParsingVendSpec:ieeeoui=0xd046,len=14 [ 1.159722@1]d hdmitx: v1 VSVDB: len=14, sup_2160p60hz=0 [ 1.159723@1]d hdmitx: Edid_ParsingVendSpec:ieeeoui=0xd046,len=14 [ 1.159725@1]d hdmitx: v1 VSVDB: len=14, sup_2160p60hz=0 [ 1.159742@1]d hdmitx: edid: get dtd0 vic: 781 [ 1.159753@1]d hdmitx: edid: get dtd1 vic: 97 [ 1.159755@1]d hdmitx: edid: get dtd2 vic: 16 [ 1.159756@1]d hdmitx: hdmitx: get PMT vic: 97 [ 1.159758@1]d hdmitx: edid: find IEEEOUT [ 1.159799@1]- hdmitx: edid: blk0 raw data [ 1.159818@1]- hdmitx: edid: [ 1.159818@1]- 00ffffffffffff001e6d010001010101011a010380a05a780aee91a3544c9926 [ 1.159818@1]- 0f5054a108003140454061407140818001010101010108e80030f2705a80b058 [ 1.159818@1]- 8a0040846300001e023a801871382d40582c450040846300001e000000fd003a [ 1.159818@1]- 3e1e883c000a202020202020000000fc004c472054560a20202020202020019f [ 1.159818@1]- [ 1.159818@1]- [ 1.159820@1]- hdmitx: edid: blk1 raw data [ 1.159838@1]- hdmitx: edid: [ 1.159838@1]- 020367f1586160101f0413051403021220212215015d5e5f6566626364293d06 [ 1.159838@1]- c015075009570778030c001000b83c20c08a010203040140fff0281038102636 [ 1.159838@1]- 67d85dc401788003e200cfe305c000e3060d01e40f030018ee0146d000241809 [ 1.159838@1]- 00ad5244a9230c662150b051001b304070360040846300001e00000000000016 [ 1.159838@1]- [ 1.159838@1]- [ 1.159841@1]- hdmitx: system: update physical size: 1600 900 [ 1.159846@1]- hdmitx: system: get current mode: 1080p60hz [ 1.159848@1]- hdmitx: system: update physical size: 1600 900 [ 1.159873@1]- hdmitx: hdmitx: display colourdepth is auto set to 12 bits (VIC: 16) [ 1.159898@1]- hdmitx: video: already init VIC = 0 Now VIC = 16 [ 1.159903@1]- hdmitx: hw: div40: 0 [ 1.172475@3]- fb: osd[0] canvas.idx =0x40 [ 1.172477@3]- fb: osd[0] canvas.addr=0xe8800000 [ 1.172478@3]- fb: osd[0] canvas.width=7680 [ 1.172480@3]- fb: osd[0] canvas.height=2160 [ 1.172481@3]- fb: osd[0] frame.width=1920 [ 1.172482@3]- fb: osd[0] frame.height=1080 [ 1.172483@3]- fb: osd[0] out_addr_id =0x1 [ 1.189773@1]- hdmitx: frac_rate = 0 [ 1.189779@1]- hdmitx: config HPLL = 4455000 frac_rate = 0 [ 1.189851@1]- hdmitx: HPLL: 0xdb0004b9 [ 1.189852@1]- hdmitx: config HPLL done [ 1.189857@1]- hdmitx: set_hpll_od3_clk_div[687] div = 10 [ 1.189861@1]- hdmitx: j = 4 vid_clk_div = 1 [ 1.189877@1]- hdmitx: set enc for VIC: 16 [ 1.231772@1]- hdmitx: hw: config hdmitx IP vic = 16 cd:6 cs: 2 [ 1.241860@1]- hdmitx: video: Sink is HDMI device [ 1.241891@1]- hdmitx: hw: set audio [ 1.241896@1]- hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0 [ 1.241907@1]- hdmitx: fs = 3, cd = 6, tmds_clk = 148500 [ 1.241909@1]- hdmitx: hw: aud_n_para = 6144 [ 1.241916@1]- hdmitx: hw: set channel status [ 1.241929@1]- hdmitx: hw: [0x10e3] = 0x1f [ 1.241946@1]- hdmitx: audio: Audio Type: PCM [ 1.241949@1]- hdmitx: system: update rx hdr info d [ 1.241951@1]- hdmitx: hw: set audio [ 1.241952@1]- hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0 [ 1.241962@1]- hdmitx: fs = 3, cd = 6, tmds_clk = 148500 [ 1.241963@1]- hdmitx: hw: aud_n_para = 6144 [ 1.241969@1]- hdmitx: hw: set channel status [ 1.241982@1]- hdmitx: hw: [0x10e3] = 0x1f [ 1.242000@1]- hdmitx: audio: Audio Type: PCM [ 1.242197@0]- fb: osd_release now.index=0,open_count=1 [ 1.243395@0]- fb: malloc_osd_memory, cma:ffffff800abfb698 [ 1.243399@0]- fb: malloc_osd_memory, 1224, base:0x00000000f0800000, size:8388608 [ 1.243401@0]- fb: use ion buffer for fb memory, fb_index=1 [ 1.243403@0]- fb: OSD1 as afbcd mode,afbc_type=2 [ 1.243915@0]- meson-fb fb: create ion_client ffffffc0c44d8780, handle=00000000b307ac1c [ 1.244245@0]- meson-fb fb: ion memory(1): created fb at 0x00000000ed400000, size 1 MiB [ 1.245237@0]- fb: 1, phy: 0x00000000ed400000, vir:0xffffff8008f01000, size=1024K [ 1.245237@0]- [ 1.245238@0]- fb: Frame buffer memory assigned at [ 1.245241@0]- fb: 1, phy: 0x00000000ed400000, vir:0xffffff8008f01000, size=1024K [ 1.245241@0]- [ 1.245243@0]- fb: 1, phy: 0x00000000ed400000, vir:0xffffff8008f01000, size=1024K [ 1.245243@0]- [ 1.245245@0]- fb: logo_index=0,fb_index=1 [ 1.245247@0]- fb: ---------------clear fb1 memory 00000000342023e6 [ 1.245417@0]- fb: osd[1] canvas.idx =0x43 [ 1.245418@0]- fb: osd[1] canvas.addr=0xed400000 [ 1.245420@0]- fb: osd[1] canvas.width=128 [ 1.245421@0]- fb: osd[1] canvas.height=32 [ 1.245422@0]- fb: osd[1] frame.width=32 [ 1.245423@0]- fb: osd[1] frame.height=32 [ 1.245424@0]- fb: osd[1] out_addr_id =0x2 [ 1.258810@0]- fb: osd_release now.index=1,open_count=1 [ 1.275477@0]- VID: VD1 off [ 1.275592@0]- fb: osd[0] enable: 1 (platform_init) [ 1.292003@0]- fb: osd[1] enable: 0 (platform_init) [ 1.315603@3]- init: ### Loading kernel modules [ 1.317061@3]- init: ### Loading kernel module font [ 1.317934@2]- init: ### Loading kernel module softcursor [ 1.318741@3]- init: ### Loading kernel module bitblit [ 1.319595@2]- init: ### Loading kernel module fbcon [ 1.325329@0]- Console: switching to colour frame buffer device 240x67 [ 1.340100@3]- init: ### Set console font [ 1.342278@2]- init: ### Checking disk(s): LABEL=COREELEC LABEL=STORAGE [ 1.831209@3]- init: ### fsck.fat 4.2 (2021-01-31) [ 1.831327@3]- init: ### /dev/mmcblk1p1: 88 files, 32364/65501 clusters [ 1.831449@3]- init: ### STORAGE: clean, 1613/451584 files, 1099497/1803776 blocks [ 1.832352@2]- init: ### No filesystem errors found, continuing... [ 1.832472@2]- init: ### Mounting flash [ 1.832538@2]- init: ### mount filesystem LABEL=COREELEC ... [ 1.959130@2]- init: ### Cleaning up flash (if required) [ 1.959475@2]- init: ### mount filesystem /flash/SYSTEM ... [ 2.062799@2]- init: ### Mounting storage [ 2.062948@2]- init: ### mount filesystem LABEL=STORAGE ... [ 2.158753@1]- EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 2.159299@1]- EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 2.167882@1]- EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.188188@1]- init: ### Loading bootsplash [ 2.192500@3]- init: ### Checking for updates [ 2.197364@2]- init: ### Preparing system [ 2.251542@2]- init: ### Checking Amlogic DTB [ 2.975582@2]- kernel-overlays-setup: setup base modules [ 3.046757@2]- kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/4.9.269 [ 3.097799@3]- kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware [ 3.098244@3]- kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays [ 3.099783@1]- kernel-overlays-setup: done [ 3.314904@2]- systemd[1]: System time before build time, advancing clock. [ 3.377917@2]- cgroup: cgroup2: unknown option "nsdelegate" [ 3.385885@2]- systemd[1]: systemd 255.4 running in system mode (-PAM -AUDIT -SELINUX -APPARMOR -IMA -SMACK -SECCOMP -GCRYPT -GNUTLS -OPENSSL -ACL +BLKID -CURL -ELFUTILS -FIDO2 +IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP -LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -TPM2 -BZIP2 -LZ4 -XZ -ZLIB -ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [ 3.385902@2]- systemd[1]: Detected architecture arm64. [ 3.387320@1]- systemd[1]: Warning! Reported kernel version 4.9.269 is older than systemd's required baseline kernel version 4.15. Your mileage may vary. [ 3.395778@3]- lcd vlock_en=1, vlock_mode=0x4 [ 3.700719@3]- systemd[1]: Queued start job for default target kodi.target. [ 3.739996@2]- Netfilter messages via NETLINK v0.30. [ 3.771637@3]- systemd[1]: Created slice system-modprobe.slice. [ 3.773518@3]- systemd[1]: Created slice system-wg\x2dquick.slice. [ 3.774810@3]- systemd[1]: Created slice user.slice. [ 3.775120@3]- systemd[1]: Started systemd-ask-password-console.path. [ 3.775291@3]- systemd[1]: Started systemd-ask-password-wall.path. [ 3.775506@3]- systemd[1]: Reached target nss-lookup.target. [ 3.775573@3]- systemd[1]: Reached target paths.target. [ 3.775671@3]- systemd[1]: Reached target slices.target. [ 3.793147@3]- systemd[1]: Listening on rpcbind.socket. [ 3.793298@3]- systemd[1]: Reached target rpcbind.target. [ 3.793627@3]- systemd[1]: Listening on systemd-initctl.socket. [ 3.794335@3]- systemd[1]: Listening on systemd-journald-dev-log.socket. [ 3.794847@3]- systemd[1]: Listening on systemd-journald.socket. [ 3.795699@3]- systemd[1]: Listening on systemd-udevd-control.socket. [ 3.796233@3]- systemd[1]: Listening on systemd-udevd-kernel.socket. [ 3.801196@3]- systemd[1]: Mounting dev-mqueue.mount... [ 3.804517@1]- systemd[1]: Mounting sys-kernel-debug.mount... [ 3.808033@1]- systemd[1]: Mounting sys-kernel-tracing.mount... [ 3.811853@2]- systemd[1]: Mounting var.mount... [ 3.816832@2]- systemd[1]: Starting kmod-static-nodes.service... [ 3.822043@1]- systemd[1]: Starting machine-id.service... [ 3.826196@1]- systemd[1]: Starting modprobe@configfs.service... [ 3.843585@0]- systemd[1]: Starting modprobe@drm.service... [ 3.847828@0]- systemd[1]: Starting modprobe@fuse.service... [ 3.852084@0]- systemd[1]: Starting storage-log.service... [ 3.859297@2]- systemd[1]: Starting swap.service... [ 3.884162@0]- systemd[1]: Starting systemd-hwdb-update.service... [ 3.896386@1]- systemd[1]: Starting systemd-modules-load.service... [ 3.900916@1]- systemd[1]: Starting systemd-timesyncd-setup.service... [ 3.904192@0]- fuse init (API version 7.26) [ 3.908298@2]- systemd[1]: Starting systemd-udev-trigger.service... [ 3.914282@1]- systemd[1]: Starting wait-time-sync.service... [ 3.925866@0]- systemd[1]: Mounted dev-mqueue.mount. [ 3.926506@0]- systemd[1]: Mounted sys-kernel-debug.mount. [ 3.927006@0]- systemd[1]: Mounted sys-kernel-tracing.mount. [ 3.927617@0]- systemd[1]: Mounted var.mount. [ 3.928795@0]- systemd[1]: Finished kmod-static-nodes.service. [ 3.929813@0]- systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 3.930483@0]- systemd[1]: Finished modprobe@configfs.service. [ 3.931452@0]- systemd[1]: modprobe@drm.service: Deactivated successfully. [ 3.932646@0]- systemd[1]: Finished modprobe@drm.service. [ 3.935945@0]- systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 3.936607@0]- systemd[1]: Finished modprobe@fuse.service. [ 3.946831@0]- systemd[1]: Mounting sys-fs-fuse-connections.mount... [ 3.950329@0]- systemd[1]: Mounting sys-kernel-config.mount... [ 3.955226@2]- systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service... [ 3.956540@2]- systemd[1]: Finished storage-log.service. [ 3.977297@2]- systemd[1]: var-log.mount was skipped because no trigger condition checks were met. [ 4.025929@0]- media: Linux media interface: v0.10 [ 4.062185@0]- systemd[1]: Finished systemd-timesyncd-setup.service. [ 4.063461@0]- systemd[1]: Finished machine-id.service. [ 4.067051@0]- systemd[1]: systemd-journald.service: bpf-firewall: Attaching egress BPF program to cgroup /sys/fs/cgroup/unified/system.slice/systemd-journald.service failed: Argument list too long [ 4.076207@0]- Linux video capture interface: v2.00 [ 4.080713@0]- systemd[1]: Starting systemd-journald.service... [ 4.097286@1]- systemd[1]: Mounted sys-fs-fuse-connections.mount. [ 4.106272@1]- amlvideo-000: V4L2 device registered as video10 [ 4.106278@1]- amlvid:info: v4l2_dev.name=:amlvideo-001 [ 4.106488@0]- amlvideo-001: V4L2 device registered as video23 [ 4.116680@0]- systemd[1]: Mounted sys-kernel-config.mount. [ 4.144253@2]- systemd-journald[2356]: Collecting audit messages is disabled. [ 4.146348@3]- video_framerate_adapter: loading out-of-tree module taints kernel. [ 4.147020@3]- Registered frame rate driver success. [ 4.148706@3]- register clk_set_setting cpu[50] [ 4.150372@0]- Registered firmware driver success. [ 4.151206@0]- Try to load video/h264_enc.bin ... [ 4.177849@1]- systemd[1]: Finished systemd-tmpfiles-setup-dev-early.service. [ 4.181515@3]- load firmware size : 76288, Name : video/h264_enc.bin. [ 4.182061@3]- Try to load video/video_ucode.bin ... [ 4.187704@3]- systemd[1]: Starting systemd-tmpfiles-setup-dev.service... [ 4.217845@2]- load firmware size : 1871104, Name : video/video_ucode.bin. [ 4.218029@2]- The fw driver version (v0.2) is lower than the pkg version (v0.3). [ 4.218030@2]- The driver version is too low that may affect the work please update asap. [ 4.285150@0]- systemd[1]: Finished swap.service. [ 4.285546@0]- systemd[1]: Reached target swap.target. [ 4.296853@0]- Amlogic A/V streaming port init [ 4.299061@0]- no need to register_tync_func. [ 4.299066@0]- no need to register_tync_func. [ 4.299066@0]- no need to register_tync_func. [ 4.299067@0]- no need to register_tync_func. [ 4.299068@0]- no need to register_tync_func. [ 4.299069@0]- no need to register_tync_func. [ 4.299070@0]- no need to register_tync_func. [ 4.299071@0]- no need to register_tync_func. [ 4.299072@0]- no need to register_tync_func. [ 4.299087@0]- get gate demux control failed (null) [ 4.299089@0]- get gate parser_top control failed (null) [ 4.299167@0]- get gate vdec control ok 0000000085a24153 [ 4.299170@0]- get gate clk_81 control failed (null) [ 4.299184@0]- get gate clk_vdec_mux control ok 00000000868b3e4b [ 4.299198@0]- get gate clk_hcodec_mux control ok 00000000bd82cfd7 [ 4.299201@0]- get gate clk_hevc_mux control failed (null) [ 4.299221@0]- get gate clk_hevcb_mux control ok 00000000e4bc733c [ 4.299224@0]- get gate ahbarb0 control failed (null) [ 4.299226@0]- get gate asyncfifo control failed (null) [ 4.299243@0]- get gate clk_hevcf_mux control ok 00000000f05ffe87 [ 4.299245@0]- get mux clk err. [ 4.299246@0]- get mux clk err. [ 4.299247@0]- get mux clk err. [ 4.299248@0]- get mux clk err. [ 4.299249@0]- get mux clk err. [ 4.299250@0]- get mux clk err. [ 4.320808@0]- systemd[1]: Mounting tmp.mount... [ 4.321238@0]- systemd[1]: Started systemd-journald.service. [ 4.329446@0]- amvdec_avs module init [ 4.346721@0]- amvdec_h264 module init [ 4.354880@0]- amvdec_h265 module init [ 4.370729@1]- ammvdec_h264 module init [ 4.380647@1]- ammvdec_mpeg12 module init [ 4.392368@1]- ammvdec_mpeg4_driver_init_module [ 4.441315@0]- systemd-journald[2356]: Received client request to flush runtime journal. [ 4.444950@0]- decoder registered as /dev/video26 [ 4.448303@0]- amvdec_vc1 module init [ 4.461152@0]- amvdec_av1 module init [ 4.467897@0]- amvdec_vp9 module init [ 4.489858@2]- wifi_dummy: Triggered SDIO/PCIe WiFi power on and bus rescan [ 4.490240@2]- wifi_dummy: found enabled /sdio@fe088000 [ 4.490262@2]- wifi_dummy: found disabled /pcieA@f5000000 [ 4.490312@2]- wifi_dummy: SDIO enabled, PCIe disabled [ 4.490332@2]- aml_wifi wifi: [extern_wifi_set_enable] WIFI Disable! 481 [ 4.799850@1]- aml_wifi wifi: [extern_wifi_set_enable] WIFI Enable! 481 [ 5.125118@0]h meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff [ 5.125124@0]h meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8 [ 5.125152@0]- meson-mmc: meson_mmc_irq_thread_v3 656 sdio: cmd:52 [ 5.126177@0]h meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff [ 5.126181@0]h meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8 [ 5.126200@0]- meson-mmc: meson_mmc_irq_thread_v3 656 sdio: cmd:52 [ 5.130760@0]h meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff [ 5.130767@0]h meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8 [ 5.130791@0]- meson-mmc: meson_mmc_irq_thread_v3 656 sdio: cmd:8 [ 5.173509@1]- sdio: queuing unknown CIS tuple 0x80 (2 bytes) [ 5.176184@1]- sdio: queuing unknown CIS tuple 0x80 (3 bytes) [ 5.178853@1]- sdio: queuing unknown CIS tuple 0x80 (3 bytes) [ 5.183823@1]- sdio: queuing unknown CIS tuple 0x80 (7 bytes) [ 5.314216@1]- meson-mmc: sdio: clk 199999997 tuning start [ 5.317647@1]- meson-mmc: sdio: adj_win: < 0 1 2 3 4 > [ 5.317652@1]- meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 0, window start 0, size 5 [ 5.317655@1]- meson-mmc: sdio: clk 199999997 tuning start [ 5.321129@1]- meson-mmc: sdio: adj_win: < 0 1 2 3 4 > [ 5.321135@1]- meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 1, window start 0, size 5 [ 5.321138@1]- meson-mmc: sdio: clk 199999997 tuning start [ 5.323913@1]- meson-mmc: sdio: adj_win: < 0 1 2 4 > [ 5.323918@1]- meson-mmc: sdio: best_win_start =4, best_win_size =4 [ 5.323921@1]- meson-mmc: sdio: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x12000 [ 5.325662@1]- sdio: new ultra high speed SDR104 SDIO card at address 0001 [ 5.325665@2]- sdio: clock 199999997, 4-bit-bus-width [ 5.325665@2]- [ 5.326042@2]- meson-mmc: [sdio_reinit] finish [ 5.397977@0]- wireguard: WireGuard 1.0.20220627 loaded. See www.wireguard.com for information. [ 5.397982@0]- wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld . All Rights Reserved. [ 6.125454@3]- [0]: vcodec_dec decoder ffffffc0bf86e000 [ 6.125582@3]- [0]: release decoder ffffffc0bf86e000 [ 6.221760@0]- meson_uart fe07a000.serial: ttyS0 use xtal(24M) 24000000 change 921600 to 921600 [ 6.221907@0]- meson_uart fe07a000.serial: ttyS0 use xtal(24M) 24000000 change 921600 to 921600 [ 6.396196@0]- Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 6.469990@0]- Console: switching to colour dummy device 80x25 [ 6.500169@3]- checking watermark status return 0xFFFFFFFF [ 6.500185@3]- optee_armtz: initialized driver [ 6.976241@2]- mali fe400000.bifrost: Continuing without Mali regulator control [ 6.976359@2]- mali fe400000.bifrost: max pp is 2 [ 6.976362@2]- mali fe400000.bifrost: set min pp to default 1 [ 6.976365@2]- mali fe400000.bifrost: min pp is 1 [ 6.976367@2]- mali fe400000.bifrost: set min clk default to 0 [ 6.976369@2]- mali fe400000.bifrost: min clk is 0 [ 6.976387@2]- mali fe400000.bifrost: hiu io source 0x00000000eb31e541 [ 6.976392@2]- mali fe400000.bifrost: hiu io source 0x000000007a735af3 [ 6.976395@2]- mali fe400000.bifrost: num of pp used most of time 1 [ 6.976397@2]- mali fe400000.bifrost: clock dvfs cfg table size is 6 [ 6.976460@2]- mali fe400000.bifrost: max clk set 4 [ 6.976463@2]- mali fe400000.bifrost: max clk is 4 [ 6.976466@2]- mali fe400000.bifrost: turbo clk set to 5 [ 6.976468@2]- mali fe400000.bifrost: turbo clk is 5 [ 6.976472@2]- mali fe400000.bifrost: default clk set to 4 [ 6.976474@2]- mali fe400000.bifrost: default clk is 4 [ 6.976481@2]- mali fe400000.bifrost: ====================0==================== [ 6.976481@2]- clk_freq= 285714285, clk_parent=fclk_div7, voltage=1150, keep_count=5, threshod=<0 76>, clk_sample=285 [ 6.976485@2]- mali fe400000.bifrost: ====================1==================== [ 6.976485@2]- clk_freq= 400000000, clk_parent=fclk_div5, voltage=1150, keep_count=5, threshod=<152 207>, clk_sample=400 [ 6.976489@2]- mali fe400000.bifrost: ====================2==================== [ 6.976489@2]- clk_freq= 500000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<38 194>, clk_sample=500 [ 6.976492@2]- mali fe400000.bifrost: ====================3==================== [ 6.976492@2]- clk_freq= 666666666, clk_parent=fclk_div3, voltage=1150, keep_count=5, threshod=<150 203>, clk_sample=666 [ 6.976496@2]- mali fe400000.bifrost: ====================4==================== [ 6.976496@2]- clk_freq= 846000000, clk_parent= gp0_pll, voltage=1150, keep_count=5, threshod=<156 255>, clk_sample=846 [ 6.976500@2]- mali fe400000.bifrost: ====================5==================== [ 6.976500@2]- clk_freq= 846000000, clk_parent= gp0_pll, voltage=1150, keep_count=5, threshod=<156 255>, clk_sample=846 [ 6.976502@2]- mali fe400000.bifrost: clock dvfs table size is 6 [ 6.977608@2]- mali_plat=000000000866e046 [ 6.999380@2]- find tzd id: 0 [ 6.999475@2]- gpu cooling register okay with err=0 [ 6.999719@2]- find tzd id: 0 [ 6.999793@2]- gpu core cooling register okay with err=0 [ 6.999829@2]- shader_present=1, tiler_present=1, l2_present=1 [ 6.999908@2]- Mali_pwr_on:gpu_irq : 200 [ 7.000109@2]- mali fe400000.bifrost: GPU identified as 0x3 arch 7.0.9 r0p0 status 0 [ 7.029117@3]- mali fe400000.bifrost: Probed as mali0 [ 7.281543@3]- dhd_module_init: in Dongle Host Driver, version 100.10.545.8 (r826445-20200303-1) [ 7.281561@3]- ======== dhd_wlan_init_plat_data ======== [ 7.281568@3]- dhd_wlan_init_gpio: WL_HOST_WAKE=-1, oob_irq=61, oob_irq_flags=0x418 [ 7.281569@3]- dhd_wlan_init_gpio: WL_REG_ON=-1 [ 7.281570@3]- dhd_wifi_platform_load: Enter [ 7.281573@3]- Power-up adapter 'DHD generic adapter' [ 7.281578@3]- wifi_platform_set_power = 1, delay: 200 msec [ 7.281581@3]- ======== PULL WL_REG_ON(-1) HIGH! ======== [ 7.281599@3]- aml_wifi wifi: [extern_wifi_set_enable] WIFI Disable! 481 [ 7.484888@3]- aml_wifi wifi: [extern_wifi_set_enable] WIFI Enable! 481 [ 7.690670@1]- Bluetooth: Core ver 2.22 [ 7.690773@1]- NET: Registered protocol family 31 [ 7.690775@1]- Bluetooth: HCI device and connection manager initialized [ 7.690786@1]- Bluetooth: HCI socket layer initialized [ 7.690792@1]- Bluetooth: L2CAP socket layer initialized [ 7.690810@1]- Bluetooth: SCO socket layer initialized [ 7.822974@2]- meson6-dwmac fdc00000.ethernet eth0: fail to init PTP. [ 7.829926@2]- IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.969903@2]- proc: unrecognized mount option "hidepid=invisible" or missing value [ 8.043829@1]- wifi_platform_bus_enumerate device present 1 [ 8.043838@1]- ======== Card detection to detect SDIO card! ======== [ 8.043841@1]- sdio_reset_comm(): [ 8.085646@2]- sdio: queuing unknown CIS tuple 0x80 (2 bytes) [ 8.088361@2]- sdio: queuing unknown CIS tuple 0x80 (3 bytes) [ 8.091075@2]- sdio: queuing unknown CIS tuple 0x80 (3 bytes) [ 8.095931@0]- sdio: queuing unknown CIS tuple 0x80 (7 bytes) [ 8.226698@1]- meson-mmc: sdio: clk 199999997 tuning start [ 8.230549@0]- meson-mmc: sdio: adj_win: < 0 1 2 3 4 > [ 8.230556@0]- meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 0, window start 0, size 5 [ 8.230560@0]- meson-mmc: sdio: clk 199999997 tuning start [ 8.234572@0]- meson-mmc: sdio: adj_win: < 0 1 2 3 4 > [ 8.234580@0]- meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 1, window start 0, size 5 [ 8.234584@0]- meson-mmc: sdio: clk 199999997 tuning start [ 8.239092@0]- meson-mmc: sdio: adj_win: < 0 1 2 3 4 > [ 8.239108@0]- meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 2, window start 0, size 5 [ 8.239117@0]- meson-mmc: sdio: clk 199999997 tuning start [ 8.243668@0]- meson-mmc: sdio: adj_win: < 0 1 2 3 4 > [ 8.243678@0]- meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 3, window start 0, size 5 [ 8.243684@0]- meson-mmc: sdio: clk 199999997 tuning start [ 8.247630@0]- meson-mmc: sdio: adj_win: < 0 1 2 3 4 > [ 8.247636@0]- meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 4, window start 0, size 5 [ 8.247640@0]- meson-mmc: sdio: clk 199999997 tuning start [ 8.251705@0]- meson-mmc: sdio: adj_win: < 0 1 2 3 4 > [ 8.251712@0]- meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 5, window start 0, size 5 [ 8.251717@0]- meson-mmc: sdio: clk 199999997 tuning start [ 8.256042@2]- meson-mmc: sdio: adj_win: < 0 1 2 3 4 > [ 8.256049@2]- meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 6, window start 0, size 5 [ 8.256054@2]- meson-mmc: sdio: clk 199999997 tuning start [ 8.259627@2]- meson-mmc: sdio: adj_win: < 0 1 2 3 4 > [ 8.259632@2]- meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 7, window start 0, size 5 [ 8.259635@2]- meson-mmc: sdio: clk 199999997 tuning start [ 8.263929@2]- meson-mmc: sdio: adj_win: < 0 1 2 3 4 > [ 8.263935@2]- meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 8, window start 0, size 5 [ 8.263943@2]- meson-mmc: sdio: clk 199999997 tuning start [ 8.267210@2]- meson-mmc: sdio: adj_win: < 0 1 2 3 > [ 8.267214@2]- meson-mmc: sdio: best_win_start =0, best_win_size =4 [ 8.267217@2]- meson-mmc: sdio: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x22000 [ 8.267224@2]- meson-mmc: [sdio_reinit] finish [ 8.283948@2]- bcmsdh_register: register client driver [ 8.284493@2]- bcmsdh_sdmmc_probe: Enter num=1 [ 8.285367@2]- bcmsdh_sdmmc_probe: Enter num=2 [ 8.285378@2]- bus num (host idx)=2, slot num (rca)=1 [ 8.285385@2]- found adapter info 'DHD generic adapter' [ 8.285426@2]- succeed to alloc static buf [ 8.285561@2]- sdioh_attach: set sd_f2_blocksize 256 [ 8.285621@2]- sdioh_attach: sd clock rate = 0 [ 8.286004@2]- dhdsdio_probe : no mutex held. set lock [ 8.286164@2]- F1 signature read @0x18000000=0x1042aae8 [ 8.291568@3]- F1 signature OK, socitype:0x1 chip:0xaae8 rev:0x2 pkg:0x4 [ 8.292403@3]- DHD: dongle ram size is set to 1310720(orig 1310720) at 0x170000 [ 8.292471@3]- [dhd] dhd_conf_set_chiprev : chip=0xaae8, chiprev=2 [ 8.297347@1]- [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing [ 8.297356@1]- [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing [ 8.297358@1]- [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing [ 8.297360@1]- [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing [ 8.297363@1]- [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing [ 8.297364@1]- [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing [ 8.301640@1]- dhd_log_dump_init: kernel log buf size = 512KB; logdump_prsrv_tailsize = 80KB; limit prsrv tail size to = 76KB [ 8.301649@1]- dhd_log_dump_init : Try to allocate memory total(4194304) special(8192) [ 8.302524@3]- dhd_attach(): thread:dhd_watchdog_thread:ea9 started [ 8.302581@3]- dhd_attach(): thread:dhd_dpc:eaa started [ 8.302627@3]- dhd_attach(): thread:dhd_rxf:eab started [ 8.302634@3]- dhd_deferred_work_init: work queue initialized [ 8.302641@3]s dhd_tcpack_suppress_set: TCP ACK Suppress mode 0 -> mode 2 [ 8.302776@3]- get_mem_val_from_file: File [/data/vendor/misc/wifi/.memdump.info] doesn't exist [ 8.302781@3]- dhd_get_memdump_info: MEMDUMP ENABLED = 3 [ 8.302788@3]- sdioh_cis_read: func_cis_ptr[0]=0x1070 [ 8.312057@3]- dhdsdio_probe_init: making DHD_BUS_DOWN [ 8.312209@3]- Dongle Host Driver, version 100.10.545.8 (r826445-20200303-1) [ 8.312762@3]- Register interface [wlan0] MAC: c0:f5:35:63:d6:b8 [ 8.312762@3]- [ 8.312871@3]- dhd_dbg_detach_pkt_monitor, 2099 [ 8.312881@3]- dhd_bus_devreset: == Power OFF == [ 8.314056@1]- dhd_open: WLAN driver is not initialized [ 8.314491@3]d dhd_bus_stop: making DHD_BUS_DOWN [ 8.314566@3]- bcmsdh_oob_intr_unregister: Enter [ 8.314568@3]- bcmsdh_oob_intr_unregister: irq is not registered [ 8.314577@3]- dhd_bus_devreset: making dhdpub up FALSE [ 8.314582@3]- dhd_txglom_enable: enable 0 [ 8.314584@3]d dhd_bus_devreset: making DHD_BUS_DOWN [ 8.314587@3]- dhd_bus_devreset: WLAN OFF DONE [ 8.314632@3]- wifi_platform_set_power = 0, delay: 0 msec [ 8.314637@3]- ======== PULL WL_REG_ON(-1) LOW! ======== [ 8.314641@3]- dhdsdio_probe : the lock is released. [ 8.314769@3]- dhd_module_init: Exit err=0 [ 8.895348@3]- meson_uart fe080000.serial: ttyS1 use xtal(24M) 24000000 change 0 to 9600 [ 8.895393@3]- meson_uart fe080000.serial: ttyS1 use xtal(24M) 24000000 change 9600 to 9600 [ 8.895403@3]- meson_uart fe080000.serial: ttyS1 use xtal(24M) 24000000 change 9600 to 115200 [ 8.929900@3]- meson_uart fe080000.serial: ttyS1 use xtal(24M) 24000000 change 115200 to 2000000 [ 9.343785@1]- dhd_open: Enter wlan0 [ 9.343790@1]- dhd_open : no mutex held. set lock [ 9.343799@1]- [ 9.343799@1]- Dongle Host Driver, version 100.10.545.8 (r826445-20200303-1) [ 9.343814@1]- [dhd-wlan0] wl_android_wifi_on : in g_wifi_on=0 [ 9.343818@1]- wifi_platform_set_power = 1, delay: 200 msec [ 9.343823@1]- ======== PULL WL_REG_ON(-1) HIGH! ======== [ 9.343842@1]- aml_wifi wifi: [extern_wifi_set_enable] WIFI Disable! 481 [ 9.531611@0]- meson_uart fe080000.serial: ttyS1 use xtal(24M) 24000000 change 2000000 to 115200 [ 9.543875@1]- aml_wifi wifi: [extern_wifi_set_enable] WIFI Enable! 481 [ 9.553472@0]- meson_uart fe080000.serial: ttyS1 use xtal(24M) 24000000 change 115200 to 2000000 [ 9.567813@3]- Bluetooth: HCI UART driver ver 2.3 [ 9.567819@3]- Bluetooth: HCI UART protocol H4 registered [ 9.567821@3]- Bluetooth: HCI UART protocol BCSP registered [ 9.567822@3]- Bluetooth: HCI UART protocol LL registered [ 9.567824@3]- Bluetooth: HCI UART protocol ATH3K registered [ 9.567826@3]- Bluetooth: HCI UART protocol Three-wire (H5) registered [ 9.568072@3]- Bluetooth: HCI UART protocol Intel registered [ 9.568155@3]- Bluetooth: HCI UART protocol Broadcom registered [ 9.568157@3]- Bluetooth: HCI UART protocol QCA registered [ 9.568158@3]- Bluetooth: HCI UART protocol AG6XX registered [ 9.568160@3]- Bluetooth: HCI UART protocol Marvell registered [ 10.051830@3]- sdio_reset_comm(): [ 10.097577@3]- sdio: queuing unknown CIS tuple 0x80 (2 bytes) [ 10.100253@3]- sdio: queuing unknown CIS tuple 0x80 (3 bytes) [ 10.235599@1]- meson-mmc: sdio: clk 199999997 tuning start [ 10.239350@1]- meson-mmc: sdio: adj_win: < 0 1 2 3 4 > [ 10.239359@1]- meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 0, window start 0, size 5 [ 10.239364@1]- meson-mmc: sdio: clk 199999997 tuning start [ 10.243245@1]- meson-mmc: sdio: adj_win: < 0 1 2 3 4 > [ 10.243254@1]- meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 1, window start 0, size 5 [ 10.243258@1]- meson-mmc: sdio: clk 199999997 tuning start [ 10.246897@1]- meson-mmc: sdio: adj_win: < 0 1 2 3 4 > [ 10.246903@1]- meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 2, window start 0, size 5 [ 10.246906@1]- meson-mmc: sdio: clk 199999997 tuning start [ 10.250471@1]- meson-mmc: sdio: adj_win: < 0 1 2 3 4 > [ 10.250476@1]- meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 3, window start 0, size 5 [ 10.250479@1]- meson-mmc: sdio: clk 199999997 tuning start [ 10.254058@1]- meson-mmc: sdio: adj_win: < 0 1 2 3 4 > [ 10.254062@1]- meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 4, window start 0, size 5 [ 10.254065@1]- meson-mmc: sdio: clk 199999997 tuning start [ 10.257639@3]- meson-mmc: sdio: adj_win: < 0 1 2 3 4 > [ 10.257642@3]- meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 5, window start 0, size 5 [ 10.257645@3]- meson-mmc: sdio: clk 199999997 tuning start [ 10.261239@3]- meson-mmc: sdio: adj_win: < 0 1 2 3 4 > [ 10.261242@3]- meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 6, window start 0, size 5 [ 10.261245@3]- meson-mmc: sdio: clk 199999997 tuning start [ 10.264733@3]- meson-mmc: sdio: adj_win: < 0 1 2 3 4 > [ 10.264736@3]- meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 7, window start 0, size 5 [ 10.264738@3]- meson-mmc: sdio: clk 199999997 tuning start [ 10.268231@3]- meson-mmc: sdio: adj_win: < 0 1 2 3 4 > [ 10.268234@3]- meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 8, window start 0, size 5 [ 10.268236@3]- meson-mmc: sdio: clk 199999997 tuning start [ 10.271712@3]- meson-mmc: sdio: adj_win: < 0 1 2 3 4 > [ 10.271714@3]- meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 9, window start 0, size 5 [ 10.271717@3]- meson-mmc: sdio: clk 199999997 tuning start [ 10.274813@3]- meson-mmc: sdio: adj_win: < 0 1 2 3 > [ 10.274819@3]- meson-mmc: sdio: best_win_start =0, best_win_size =4 [ 10.274822@3]- meson-mmc: sdio: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x22000 [ 10.274871@3]- sdioh_start: set sd_f2_blocksize 256 [ 10.275150@3]- [ 10.275150@3]- [ 10.275150@3]- dhd_bus_devreset: == Power ON == [ 10.275297@3]- F1 signature read @0x18000000=0x1042aae8 [ 10.278795@3]- F1 signature OK, socitype:0x1 chip:0xaae8 rev:0x2 pkg:0x4 [ 10.279440@3]- DHD: dongle ram size is set to 1310720(orig 1310720) at 0x170000 [ 10.279491@3]d dhd_bus_devreset: making DHD_BUS_DOWN [ 10.279532@3]- dhdsdio_probe_init: making DHD_BUS_DOWN [ 10.279883@3]- dhd_os_open_image1: /usr/lib/firmware/brcm/config.txt (507 bytes) open success [ 10.304385@3]- [dhd] dhd_conf_read_country : ccode = SG [ 10.304403@3]- [dhd] dhd_conf_read_others : bcn_timeout = 20 [ 10.304406@3]- [dhd] dhd_conf_read_sdio_params : dhd_slpauto = 0 [ 10.304412@3]- [dhd] dhd_conf_read_pm_params : PM = 0 [ 10.304433@3]- [dhd] dhd_conf_read_nv_by_chip : nv_by_chip_count=16 [ 10.304435@3]- [dhd] dhd_conf_read_nv_by_chip : chip=0xa962, chiprev=0, name=nvram_ap6181.txt [ 10.304437@3]- [dhd] dhd_conf_read_nv_by_chip : chip=0xa962, chiprev=1, name=nvram_ap6210.txt [ 10.304439@3]- [dhd] dhd_conf_read_nv_by_chip : chip=0xa9a6, chiprev=0, name=nvram_ap6212.txt [ 10.304441@3]- [dhd] dhd_conf_read_nv_by_chip : chip=0xa9a6, chiprev=1, name=nvram_ap6212a.txt [ 10.304443@3]- [dhd] dhd_conf_read_nv_by_chip : chip=0xa9a6, chiprev=2, name=nvram_ap6236.txt [ 10.304445@3]- [dhd] dhd_conf_read_nv_by_chip : chip=0x4345, chiprev=6, name=nvram_ap6255.txt [ 10.304447@3]- [dhd] dhd_conf_read_nv_by_chip : chip=0x4345, chiprev=9, name=nvram_ap6256.txt [ 10.304449@3]- [dhd] dhd_conf_read_nv_by_chip : chip=0x4330, chiprev=4, name=nvram_ap6330.txt [ 10.304451@3]- [dhd] dhd_conf_read_nv_by_chip : chip=0x4339, chiprev=1, name=nvram_ap6335.txt [ 10.304453@3]- [dhd] dhd_conf_read_nv_by_chip : chip=0x4354, chiprev=1, name=nvram_ap6354.txt [ 10.304455@3]- [dhd] dhd_conf_read_nv_by_chip : chip=0x4354, chiprev=2, name=nvram_ap6356.txt [ 10.304457@3]- [dhd] dhd_conf_read_nv_by_chip : chip=0x4335, chiprev=1, name=nvram_bcm4335.txt [ 10.304459@3]- [dhd] dhd_conf_read_nv_by_chip : chip=0xa94c, chiprev=2, name=nvram_ap6234.txt [ 10.304461@3]- [dhd] dhd_conf_read_nv_by_chip : chip=0x4359, chiprev=9, name=nvram_ap6359s.txt [ 10.304463@3]- [dhd] dhd_conf_read_nv_by_chip : chip=0x4334, chiprev=3, name=nvram_bcm4334.txt [ 10.304465@3]- [dhd] dhd_conf_read_nv_by_chip : chip=0xaae8, chiprev=2, name=nvram_ap6275s.txt [ 10.304480@3]- [dhd] dhd_conf_set_path_params : Final fw_path=/usr/lib/firmware/brcm/fw_bcm43752a2_ag.bin [ 10.304482@3]- [dhd] dhd_conf_set_path_params : Final nv_path=/usr/lib/firmware/brcm/nvram_ap6275s.txt [ 10.304483@3]- [dhd] dhd_conf_set_path_params : Final clm_path=/usr/lib/firmware/brcm/clm_bcm43752a2_ag.blob [ 10.304485@3]- [dhd] dhd_conf_set_path_params : Final conf_path=/usr/lib/firmware/brcm/config.txt [ 10.304958@3]- dhd_os_open_image1: /usr/lib/firmware/brcm/fw_bcm43752a2_ag.bin (685923 bytes) open success [ 10.397354@3]- dhd_os_open_image1: /usr/lib/firmware/brcm/nvram_ap6275s.txt (8361 bytes) open success [ 10.413019@3]- NVRAM version: AP6275S_NVRAM_V1.2.1_20200311 [ 10.413686@3]- dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. [ 10.473727@3]- dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) [ 10.474037@3]- bcmsdh_oob_intr_register: HW_OOB irq=61 flags=0x8 [ 10.474081@3]- bcmsdh_oob_intr_register: disable_irq_wake [ 10.474246@3]- get_mem_val_from_file: File [/data/vendor/misc/wifi/.memdump.info] doesn't exist [ 10.474267@3]- dhd_get_memdump_info: MEMDUMP ENABLED = 3 [ 10.476450@0]s dhd_tcpack_suppress_set: TCP ACK Suppress mode 2 -> mode 1 [ 10.477653@0]- dhd_os_open_image1: /usr/lib/firmware/brcm/clm_bcm43752a2_ag.blob (28865 bytes) open success [ 10.478142@0]- dhd_check_current_clm_data: ----- This FW is not included CLM data ----- [ 10.499836@0]- dhd_check_current_clm_data: ----- This FW is included CLM data ----- [ 10.502064@0]- Firmware up: op_mode=0x0005, MAC=c0:f5:35:63:d6:b8 [ 10.502560@0]- Disable tdls_auto_op failed. -1 [ 10.506391@0]- dhd_preinit_ioctls: event_log_max_sets: 26 ret: 0 [ 10.517249@0]- Driver: 100.10.545.8 (r826445-20200303-1) [ 10.517249@0]- Firmware: wl0: Dec 4 2019 01:55:28 version 18.35.387.11 (wlan=r853831) FWID 01-ae9dfd3b [ 10.517249@0]- CLM: 9.9.5_SS (2019-12-04 01:26:12) [ 10.517997@0]- dhd_txglom_enable: enable 1 [ 10.518001@0]- [dhd] dhd_conf_set_txglom_params : txglom_mode=copy [ 10.518003@0]- [dhd] dhd_conf_set_txglom_params : txglomsize=36, deferred_tx_len=0 [ 10.518004@0]- [dhd] dhd_conf_set_txglom_params : txinrx_thres=128, dhd_txminmax=-1 [ 10.518006@0]- [dhd] dhd_conf_set_txglom_params : tx_max_offset=0, txctl_tmo_fix=300 [ 10.518011@0]- [dhd] dhd_conf_get_disable_proptx : fw_proptx=1, disable_proptx=-1 [ 10.520655@0]- dhd_wlfc_hostreorder_init(): successful bdcv2 tlv signaling, 64 [ 10.523256@0]- dhd_pno_init: Support Android Location Service [ 10.547962@3]- rtt_do_get_ioctl: failed to send getbuf proxd iovar (CMD ID : 1), status=-23 [ 10.547970@3]- dhd_rtt_init : FTM is not supported [ 10.548497@3]- dhd_rtt_ftm_config : failed to set config [ 10.550893@3]- dhd_ecounter_autoconfig Ecounter autoconfig in fw failed : 0 [ 10.555847@0]- [INIT] logset:8 is preserve/chatty [ 10.556896@0]- [INIT] logset:10 is preserve/chatty [ 10.565561@0]- [dhd] dhd_conf_set_country : set country SG, revision 0 [ 10.570420@0]- [dhd] dhd_conf_set_country : Country code: SG (SG/0) [ 10.576690@0]- [dhd-wlan0] wl_android_wifi_on : Success [ 10.638524@0]- dhd_open : the lock is released. [ 10.638534@0]- dhd_open: Exit wlan0 ret=0 [ 10.638536@0]- [wlan0] tx queue started [ 10.712213@0]- [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 0, bssidx: 0 [ 10.956100@3]- [dhd-wlan0] wl_cfg80211_connect : Connecting with b0:0a:d5:63:70:03 ssid "Three_627003_5GHz", len (17), sec=wpa2psk/mfpn/aes, channel=44 [ 10.956100@3]- [ 10.957048@3]- dhd_dbg_start_pkt_monitor, 1621 [ 11.068673@3]- [dhd-wlan0] wl_iw_event : Link UP with b0:0a:d5:63:70:03 [ 11.068684@3]- [dhd-wlan0] wl_ext_iapsta_event : [S] Link UP with b0:0a:d5:63:70:03 [ 11.070979@3]- [dhd-wlan0] wl_bss_connect_done : Report connect result - connection succeeded [ 11.078996@0]- [dhd-wlan0] wl_add_keyext : key index (0) [ 11.615785@2]- [TEE] E/TA: MM-module-name:Video firmware TA,Version:1.0.1-gb173c81(build:369) [ 11.615790@2]- [TEE] E/TA: fw_check_pack_version:282 the package has 110 fws totally. [ 11.615792@2]- [TEE] E/TA: fw_check_pack_version:299 The TA ver is v1.0 [ 11.615793@2]- [TEE] E/TA: fw_check_pack_version:300 The fw ver is v0.3 [ 11.615794@2]- [TEE] E/TA: fw_data_insert:379 the fw with 520 KB will be loaded. [ 11.615796@2]- [TEE] M/TA: TEE_Video_Load_FW success [ 11.660731@2]- dovi: disagrees about version of symbol module_layout [ 11.660743@2]- dovi: module license 'AML' taints kernel. [ 11.660745@2]- Disabling lock debugging due to kernel taint [ 11.662333@2]- dovi: disagrees about version of symbol register_dv_functions [ 11.663285@2]- *** amlogic_dolby_vision_init dv: null *** [ 11.663290@2]- *** register_dv_stb_functions.*** [ 11.663370@2]- hdr10_policy 115, ko_info THE GOLDEN FLUENT TECHNOLOGY AND SCIENCE HK LIMITED [stb:2.4:e]-[v1.0]-[ Mon Oct 5 20:07:12 CST 2020]-[ brian.zhu]-[* stb_2.4]-[18510d0c6c2246e2fe28c45ae9f71b68e2bd23fa]-[Date: Sat Oct 3 21:25:19 2020 -0700]-[0] [ 11.663374@2]- efuse_mode=0 reg_value = 0x18 [ 11.663375@2]- dv capability 7 [ 12.129813@0]h cectx fe044000.aocec: bad iniator with self 0x0 [ 12.273703@0]h cectx fe044000.aocec: bad iniator with self 0x0 [ 12.434713@0]h cectx fe044000.aocec: bad iniator with self 0x0 [ 12.602346@0]h cectx fe044000.aocec: bad iniator with self 0x0 [ 18.397048@2]- Registered IR keymap rc-empty [ 18.397403@2]- input: meson-ir as /devices/platform/fe084040.meson-ir/rc/rc0/input4 [ 18.397582@2]- rc rc0: meson-ir as /devices/platform/fe084040.meson-ir/rc/rc0 [ 18.404653@2]- lirc_dev: IR Remote Control driver registered, major 492 [ 18.407517@2]- meson-ir fe084040.meson-ir: receiver initialized [ 18.408937@2]- rc rc0: lirc_dev: driver ir-lirc-codec (meson-ir) registered at minor = 0 [ 18.408948@2]- IR LIRC bridge handler initialized [ 18.531850@1]- IR NEC protocol handler initialized [ 18.562938@2]- IR RC6 protocol handler initialized [ 18.648623@0]- hdmitx: hdmitx: find SD only 4x3 [ 18.733141@2]- hdmitx: hdmitx: find SD only 4x3 [ 21.226799@2]- hdmitx: hdmitx: find SD only 4x3 [ 21.227290@2]- hdmitx: hdmitx: find SD only 4x3 [ 21.228638@3]- fb: osd_release now.index=0,open_count=1 [ 21.243163@1]- fb: malloc_osd_memory, cma:ffffff800abfb698 [ 21.243170@1]- fb: malloc_osd_memory, 1224, base:0x00000000f0800000, size:8388608 [ 21.243172@1]- fb: use ion buffer for fb memory, fb_index=2 [ 21.243174@1]- fb: OSD2 as afbcd mode,afbc_type=2 [ 21.243674@1]- meson-fb fb: create ion_client ffffffc0c44d8780, handle=0000000003d23742 [ 21.243680@1]- meson-fb fb: ion memory(2): created fb at 0x00000000ed500000, size 1 MiB [ 21.243683@1]- fb: 2, phy: 0x00000000ed500000, vir:0xffffff8011306000, size=1024K [ 21.243683@1]- [ 21.243689@1]- fb: Frame buffer memory assigned at [ 21.243692@1]- fb: 2, phy: 0x00000000ed500000, vir:0xffffff8011306000, size=1024K [ 21.243692@1]- [ 21.243694@1]- fb: 2, phy: 0x00000000ed500000, vir:0xffffff8011306000, size=1024K [ 21.243694@1]- [ 21.243696@1]- fb: logo_index=0,fb_index=2 [ 21.243699@1]- fb: ---------------clear fb2 memory 00000000e56c1381 [ 21.243928@1]- fb: osd[2] canvas.idx =0x41 [ 21.243931@1]- fb: osd[2] canvas.addr=0xed500000 [ 21.243932@1]- fb: osd[2] canvas.width=128 [ 21.243933@1]- fb: osd[2] canvas.height=32 [ 21.243935@1]- fb: osd[2] frame.width=32 [ 21.243936@1]- fb: osd[2] frame.height=32 [ 21.243937@1]- fb: osd[2] out_addr_id =0x3 [ 21.260366@0]- fb: vpu clkc clock is 199 MHZ [ 21.260397@0]- fb: malloc_osd_memory, cma:ffffff800abfb698 [ 21.260399@0]- fb: malloc_osd_memory, 1224, base:0x00000000f0800000, size:8388608 [ 21.260401@0]- fb: use ion buffer for fb memory, fb_index=3 [ 21.260402@0]- fb: OSD3 as afbcd mode,afbc_type=2 [ 21.262378@1]- meson-fb fb: create ion_client ffffffc0c44d8780, handle=00000000bd0b9905 [ 21.262384@1]- meson-fb fb: ion memory(3): created fb at 0x00000000ed600000, size 8 MiB [ 21.262386@1]- fb: 3, phy: 0x00000000ed600000, vir:0xffffff8011407000, size=8192K [ 21.262386@1]- [ 21.262388@1]- fb: Frame buffer memory assigned at [ 21.262391@1]- fb: 3, phy: 0x00000000ed600000, vir:0xffffff8011407000, size=8192K [ 21.262391@1]- [ 21.262393@1]- fb: 3, phy: 0x00000000ed600000, vir:0xffffff8011407000, size=8192K [ 21.262393@1]- [ 21.262395@1]- fb: logo_index=0,fb_index=3 [ 21.262397@1]- fb: ---------------clear fb3 memory 000000009e676841 [ 21.263781@1]- fb: osd[3] canvas.idx =0x42 [ 21.263783@1]- fb: osd[3] canvas.addr=0xed600000 [ 21.263784@1]- fb: osd[3] canvas.width=128 [ 21.263785@1]- fb: osd[3] canvas.height=32 [ 21.263786@1]- fb: osd[3] frame.width=32 [ 21.263787@1]- fb: osd[3] frame.height=32 [ 21.263789@1]- fb: osd[3] out_addr_id =0x4 [ 21.895426@3]- audio_ddr_mngr: frddrs[0] registered by device fe330000.audiobus:tdm@1 [ 21.896301@3]- tdm playback mute: 1, lane_cnt = 4 [ 21.896355@3]- audio_ddr_mngr: frddrs[0] released by device fe330000.audiobus:tdm@1 [ 21.897035@3]- audio_ddr_mngr: frddrs[0] registered by device fe330000.audiobus:tdm@1 [ 21.897646@3]- tdm playback mute: 1, lane_cnt = 4 [ 21.897686@3]- audio_ddr_mngr: frddrs[0] released by device fe330000.audiobus:tdm@1 [ 21.898273@3]- audio_ddr_mngr: frddrs[1] registered by device fe330000.audiobus:i2s2hdmi [ 21.898524@3]- tdm playback mute: 1, lane_cnt = 4 [ 21.898560@3]- audio_ddr_mngr: frddrs[1] released by device fe330000.audiobus:i2s2hdmi [ 21.899256@3]- audio_ddr_mngr: frddrs[1] registered by device fe330000.audiobus:i2s2hdmi [ 21.899469@3]- tdm playback mute: 1, lane_cnt = 4 [ 21.899503@3]- audio_ddr_mngr: frddrs[1] released by device fe330000.audiobus:i2s2hdmi [ 21.900304@3]- audio_ddr_mngr: frddrs[1] registered by device fe330000.audiobus:i2s2hdmi [ 21.900632@3]- tdm playback mute: 1, lane_cnt = 4 [ 21.900676@3]- audio_ddr_mngr: frddrs[1] released by device fe330000.audiobus:i2s2hdmi [ 21.913796@3]- audio_ddr_mngr: frddrs[0] registered by device fe330000.audiobus:tdm@1 [ 21.914938@3]- tdm playback mute: 1, lane_cnt = 4 [ 21.914993@3]- audio_ddr_mngr: frddrs[0] released by device fe330000.audiobus:tdm@1 [ 21.915693@3]- audio_ddr_mngr: frddrs[1] registered by device fe330000.audiobus:i2s2hdmi [ 21.916533@3]- tdm playback mute: 1, lane_cnt = 4 [ 21.916586@3]- audio_ddr_mngr: frddrs[1] released by device fe330000.audiobus:i2s2hdmi [ 21.917271@3]- audio_ddr_mngr: frddrs[1] registered by device fe330000.audiobus:spdif@0 [ 21.917708@3]- spdif_a keep clk continuous [ 21.917710@3]- spdif_a keep clk continuous [ 21.917748@3]- audio_ddr_mngr: frddrs[1] released by device fe330000.audiobus:spdif@0 [ 21.918515@3]- audio_ddr_mngr: frddrs[1] registered by device fe330000.audiobus:spdif@1 [ 21.919444@3]- spdif_b keep clk continuous [ 21.919446@3]- spdif_b keep clk continuous [ 21.919484@3]- audio_ddr_mngr: frddrs[1] released by device fe330000.audiobus:spdif@1 [ 21.924576@3]- audio_dsp: buf=0 [ 21.924584@3]- audio_dsp: IEC958_mode_raw=0 [ 21.929535@3]- audio_ddr_mngr: frddrs[1] registered by device fe330000.audiobus:i2s2hdmi [ 21.930740@3]- set mclk:11289600, mpll:22579200, get mclk:11289593, mpll:22579186 [ 21.930747@3]- asoc aml_dai_set_tdm_fmt, 0x4001, 0000000060ce2097, id(2), clksel(2) [ 21.930748@3]- aml_tdm_set_fmt(), fmt not change [ 21.930755@3]- dump_pcm_setting(0000000060ce2097) [ 21.930757@3]- pcm_mode(1) [ 21.930759@3]- sysclk(11289600) [ 21.930760@3]- sysclk_bclk_ratio(4) [ 21.930762@3]- bclk(2822400) [ 21.930763@3]- bclk_lrclk_ratio(64) [ 21.930765@3]- lrclk(44100) [ 21.930766@3]- tx_mask(0x3) [ 21.930767@3]- rx_mask(0x3) [ 21.930768@3]- slots(2) [ 21.930769@3]- slot_width(32) [ 21.930770@3]- lane_mask_in(0x0) [ 21.930771@3]- lane_mask_out(0xf) [ 21.930773@3]- lane_oe_mask_in(0x0) [ 21.930774@3]- lane_oe_mask_out(0x0) [ 21.930775@3]- lane_lb_mask_in(0x0) [ 21.930778@3]- set mclk:11289600, mpll:22579200, get mclk:11289593, mpll:22579186 [ 21.930780@3]- aml_tdm_set_clkdiv, div 4, clksel(2) [ 21.930788@3]- aml_set_bclk_ratio, select I2S mode [ 21.930793@3]- aml_tdm_hw_setting_init(), enable mclk for tdm-2 [ 21.930897@3]- aml_tdm_prepare(), reset fddr [ 21.930909@3]- hdmitx: hw: set audio [ 21.930913@3]- hdmitx: hw: hdmitx tx_aud_src = 1, audio_param->channel_num = 1, hdev->aud_output_ch = 33 [ 21.930925@3]- hdmitx: fs = 3, cd = 6, tmds_clk = 148500 [ 21.930928@3]- hdmitx: hw: aud_n_para = 6144 [ 21.930936@3]- hdmitx: hw: set channel status [ 21.955771@3]- hdmitx: hw: [0x10e3] = 0x1f [ 21.955793@3]- hdmitx: audio: Audio Type: PCM [ 21.955797@3]- hdmitx: hw: set audio [ 21.955800@3]- hdmitx: hw: hdmitx tx_aud_src = 1, audio_param->channel_num = 1, hdev->aud_output_ch = 33 [ 21.955811@3]- hdmitx: fs = 2, cd = 6, tmds_clk = 148500 [ 21.955814@3]- hdmitx: hw: aud_n_para = 6272 [ 21.955821@3]- hdmitx: hw: set channel status [ 21.983759@3]- hdmitx: hw: [0x10e3] = 0x1f [ 21.983778@3]- hdmitx: audio: Audio Type: PCM [ 21.983780@3]- hdmitx: audio: set audio param [ 21.983928@3]- tdm playback mute: 0, lane_cnt = 4 [ 21.984052@3]- aml_tdm_prepare(), reset fddr [ 21.984128@3]- tdm playback mute: 0, lane_cnt = 4 [ 21.985915@3]- asoc-aml-card auge_sound: TDM[2] Playback enable [ 22.713509@0]- Bluetooth: RFCOMM TTY layer initialized [ 22.713526@0]- Bluetooth: RFCOMM socket layer initialized [ 22.713550@0]- Bluetooth: RFCOMM ver 1.11 [ 23.357707@1]- cectx fe044000.aocec: CEC framework ctrl enabled [ 38.759814@2]- [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing [ 38.759954@2]- [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing [ 38.760157@2]- [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing [ 38.787845@2]- [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing [ 60.415771@3]- fb: mem_free_work, free memory: addr:800000 [ 82.186412@2]- asoc-aml-card auge_sound: TDM[2] Playback stop [ 82.186432@2]- audio_ddr_mngr: frddr stop success, fifo id 1, regbase:0x80, arb sts:0x40000020 [ 82.186493@2]- aml_tdm_prepare(), reset fddr [ 82.186600@2]- tdm playback mute: 0, lane_cnt = 4 [ 92.186862@2]- aml_tdm_hw_setting_free(), disable mclk for tdm-2 [ 92.186894@2]- tdm playback mute: 1, lane_cnt = 4 [ 92.187030@2]- audio_ddr_mngr: frddrs[1] released by device fe330000.audiobus:i2s2hdmi [ 694.139240@2]- VID: VD1 off [ 694.139738@2]- vfm_map_store:rm default [ 694.139823@2]- vfm_map_store:add default decoder ppmgr amlvideo deinterlace amvideo [ 694.140199@2]- the vdec clock on, ref cnt: 1 [ 694.140214@2]- the clk_vdec_mux clock on, ref cnt: 1 [ 694.140377@2]- vdec mux clock is 799999987 Hz [ 694.140592@2]- vdec_create instance 0000000031db8e0f, total 1, PM: pd-sec-api [ 694.140927@2]- vdec_init, dev_name:amvdec_h264mvc, vdec_type=VDEC_TYPE_SINGLE id = 0 [ 694.140935@2]- vdec_enable_DMC input->target= 0x0 [ 694.146635@1]- pts_start, type=0 [ 694.147461@1]- video first pts = 0 [ 694.147471@1]- [0]: [VIDEO-stbuf-0] addr: cd800000, size: a00000, thrRW: 1, extbuf: 0, secure: 0 [ 694.148532@2]- audio_dsp: buf=2 [ 694.148538@2]- audio_dsp: IEC958_mode_raw=2 [ 694.152620@1]- amvdec_h264mvc probe start. [ 694.152655@1]- [ 694.152655@1]- vh264mvc_init [ 694.152670@1]- decoder_bmmu_box_alloc_box, tvp_flags = 0 [ 694.152987@1]- vdec_request_irq 00000000c47335c1, vh264mvc-irq [ 694.153010@1]- ppmgr local_init [ 694.153143@1]- ppmgr local_init [ 694.153241@1]- dim:ch[0]:di_receiver_event_fun,8:_REG [ 694.153244@1]- dim:reg:amlvideo[1] [ 694.153784@1]- dim:reg:use[0]ms [ 694.153808@1]- dim:ch[0]:di_receiver_event_fun,3:_START [ 694.153819@1]- amvdec_h264mvc probe end. [ 694.153852@1]- vdec_init, vf_provider_name = , b 0 [ 694.153866@1]- vdec->port_flag=0x102, port_flag=0x103 [ 694.154685@1]d video first checkin pts = 0 [ 694.154690@1]d [pts_kpi] first check in vpts <0xf4:0x0(0x0)> ok! [ 694.159738@3]- audio_ddr_mngr: frddrs[1] registered by device fe330000.audiobus:spdif@1 [ 694.162237@3]- set 4x audio clk for 958 [ 694.162331@3]- set spdifout clk:98304000, mpll:393216000 [ 694.162533@3]- get spdifout clk:98303212, mpll:393212848 [ 694.162537@3]- set 4x audio clk for 958 [ 694.162592@3]- set spdifout clk:98304000, mpll:393216000 [ 694.162597@3]- get spdifout clk:98303212, mpll:393212848 [ 694.162678@3]- set 4x audio clk for 958 [ 694.162694@3]- set spdifout clk:98304000, mpll:393216000 [ 694.162698@3]- get spdifout clk:98303212, mpll:393212848 [ 694.162705@3]- set 4x audio clk for 958 [ 694.162784@3]- set spdifout clk:98304000, mpll:393216000 [ 694.162821@3]- get spdifout clk:98303212, mpll:393212848 [ 694.163151@3]- iec_info: rate: 192000, codec_type:0x7, channel status L:0x9001902, R:0x9001902 [ 694.163167@3]- hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 694.163171@3]- hdmitx: hw: set audio [ 694.163177@3]- hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0 [ 694.163195@3]- hdmitx: fs = 2, cd = 6, tmds_clk = 148500 [ 694.163201@3]- hdmitx: hw: aud_n_para = 6272 [ 694.163208@3]- hdmitx: hw: set channel status [ 694.163221@3]- hdmitx: hw: [0x10e3] = 0x1f [ 694.163240@3]- hdmitx: audio: Audio Type: PCM [ 694.163241@3]- hdmitx: err chn msk, must larger than 0 [ 694.163248@3]- hdmitx: audio: aout notify format CT_MAT [ 694.163250@3]- hdmitx: audio: aout notify channel num: 8 [ 694.163251@3]- hdmitx: hw: set audio [ 694.163252@3]- hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 7, hdev->aud_output_ch = 0 [ 694.163262@3]- hdmitx: fs = 7, cd = 6, tmds_clk = 148500 [ 694.163264@3]- hdmitx: hw: aud_n_para = 24576 [ 694.163270@3]- hdmitx: hw: set channel status [ 694.163283@3]- hdmitx: hw: [0x10e3] = 0x1f [ 694.163301@3]- hdmitx: audio: Audio Type: MAT(MLP) [ 694.163303@3]- hdmitx: audio: set audio param [ 694.163316@3]- aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 694.163323@3]- iec_info: rate: 192000, codec_type:0x7, channel status L:0x9001902, R:0x9001902 [ 694.163326@3]- hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 694.163327@3]- hdmitx: err chn msk, must larger than 0 [ 694.163378@3]- aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 694.163889@3]- iec_info: rate: 192000, codec_type:0x7, channel status L:0x9001902, R:0x9001902 [ 694.163902@3]- hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 694.163904@3]- hdmitx: err chn msk, must larger than 0 [ 694.164515@1]- vdec mux clock is 799999987 Hz [ 694.164524@1]- vdec1 video changed to 1920 x 1080 46 fps clk->800MHZ [ 694.165906@1]- aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 694.165953@1]- iec_info: rate: 192000, codec_type:0x7, channel status L:0x9001902, R:0x9001902 [ 694.165967@1]- hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 694.165969@1]- hdmitx: err chn msk, must larger than 0 [ 694.165980@1]- aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 694.175457@3]- asoc-aml-card auge_sound: S/PDIF[1] Playback enable [ 694.175587@3]- asoc-aml-card auge_sound: S/PDIF[1] Playback enable [ 694.328587@2]h [pts_kpi] first lookup vpts=0x1 offset:0x190 [ 694.404165@0]- dim:value reg:ch[0]:fix_buf:0;ponly <0,0> [ 694.404195@0]- dim:1920x1080-0x10. [ 694.405374@0]- dim:dim_nr_ds_init alloc nrds canvas 226. [ 694.408626@0]h [tsync_avevent_locked 1064]VIDEO_START-tsync_mode:1(S) [ 694.408639@0]h pcr:0x0,param:0x1,vpts:0x0,apts:0xffffffff [ 694.408648@0]h video first pts = 1 [ 694.559337@3]- asoc-aml-card auge_sound: S/PDIF[1] Playback disable [ 694.559356@3]- audio_ddr_mngr: frddr stop success, fifo id 1, regbase:0x80, arb sts:0x40000020 [ 694.559362@3]- asoc-aml-card auge_sound: S/PDIF[1] Playback disable [ 694.559414@3]- iec_info: rate: 192000, codec_type:0x7, channel status L:0x9001902, R:0x9001902 [ 694.559422@3]- hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 694.559423@3]- hdmitx: err chn msk, must larger than 0 [ 694.559437@3]- aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 694.559443@3]- iec_info: rate: 192000, codec_type:0x7, channel status L:0x9001902, R:0x9001902 [ 694.559446@3]- hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 694.559447@3]- hdmitx: err chn msk, must larger than 0 [ 694.559455@3]- aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 694.559677@0]- spdif_b keep clk continuous [ 694.559679@0]- spdif_b keep clk continuous [ 694.559806@3]- audio_ddr_mngr: frddrs[1] released by device fe330000.audiobus:spdif@1 [ 694.560382@3]- hdmitx: hdmitx: config: 3dfp [ 694.560600@3]- vout: vmode set to null [ 694.560701@3]- fb: current vmode=1080p60hz, cmd: 0x10000 [ 694.560707@3]- vlock: event MODE_CHANGE_PRE 0 [ 694.560753@3]- hdmitx: edid: not find mapped vic [ 694.560772@3]- vout: new mode null set ok [ 694.560774@3]- fb: current vmode=null, cmd: 0x20000 [ 694.560904@3]- hdmitx: system: set frac_rate_policy as 1 [ 694.560948@3]- vout: vmode set to 1080p24hz [ 694.561011@3]- fb: current vmode=null, cmd: 0x10000 [ 694.561019@3]- hdmitx: hdmitx_set_current_vmode[5644] [ 694.561021@3]- hdmitx: system: recalc before 1080p24hz 24 1, frac 0 [ 694.561024@3]- hdmitx: system: recalc after 1080p24hz 2997 125, frac 1 [ 694.561026@3]- hdmitx: system: get current mode: 1080p24hz [ 694.561029@3]- hdmitx: system: update physical size: 1600 900 [ 694.561041@3]- hdmitx: hdmitx: display colourdepth is forced to 8 bits because of 3dfp mode (VIC: 32) [ 694.561065@3]- hdmitx: video: already init VIC = 0 Now VIC = 32 [ 694.561069@3]- hdmitx: hw: div40: 0 [ 694.589795@3]- hdmitx: frac_rate = 1 [ 694.589804@3]- hdmitx: config HPLL = 5940000 frac_rate = 1 [ 694.589877@3]- hdmitx: config HPLL done [ 694.589882@3]- hdmitx: set_hpll_od3_clk_div[687] div = 6 [ 694.589888@3]- hdmitx: j = 1 vid_clk_div = 1 [ 694.589903@3]- hdmitx: set enc for VIC: 32 [ 694.589917@0]h hdmitx: system: irq 80000001 0 [ 694.591914@3]- hdmitx: hw: config hdmitx IP vic = 32 cd:4 cs: 2 [ 694.602001@3]- hdmitx: video: Sink is HDMI device [ 694.602023@3]- hdmitx: hw: set audio [ 694.602029@3]- hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 7, hdev->aud_output_ch = 0 [ 694.602040@3]- hdmitx: fs = 7, cd = 4, tmds_clk = 74176 [ 694.602042@3]- hdmitx: hw: aud_n_para = 46592 [ 694.602049@3]- hdmitx: hw: set channel status [ 694.602062@3]- hdmitx: hw: [0x10e3] = 0x1f [ 694.602080@3]- hdmitx: audio: Audio Type: MAT(MLP) [ 694.602083@3]- hdmitx: system: update rx hdr info d [ 694.602088@3]- vout: new mode 1080p24hz set ok [ 694.602091@3]- fb: current vmode=1080p24hz, cmd: 0x20000 [ 694.602098@3]- fb: outputmode changed to 1080p24hz, reset osd0, (0, 0, 1919, 1079) -> (0, 0, 1919, 2204) [ 694.602394@0]- fb: osd_update_disp_axis_hw:pan_data(0,0,1919,1079) [ 694.602404@0]- fb: osd_update_disp_axis_hw:dispdata(0,0,1919,1079) [ 694.685590@0]- fb: osd[0] enable: 1 (kodi.bin) [ 694.691774@3]- hdmitx: [0x10000104]: 0x00000001 [ 694.691780@3]- hdmitx: [0x10000180]: 0x000000ff [ 694.691782@3]- hdmitx: [0x10000181]: 0x000000ff [ 694.691784@3]- hdmitx: [0x10000182]: 0x00000003 [ 694.691785@3]- hdmitx: [0x10000183]: 0x00000007 [ 694.691787@3]- hdmitx: [0x10000184]: 0x0000003f [ 694.691788@3]- hdmitx: [0x10000185]: 0x00000002 [ 694.691790@3]- hdmitx: [0x10000187]: 0x000000ff [ 694.691792@3]- hdmitx: [0x10000188]: 0x00000003 [ 694.727275@0]- fb: osd_update_disp_axis_hw:pan_data(0,1080,1919,2159) [ 694.727277@0]- fb: osd_update_disp_axis_hw:dispdata(0,0,1919,1079) [ 694.769019@0]- fb: osd_update_disp_axis_hw:pan_data(0,0,31,31) [ 694.769021@0]- fb: osd_update_disp_axis_hw:dispdata(0,0,31,31) [ 694.810681@0]- fb: osd_update_disp_axis_hw:pan_data(0,0,31,31) [ 694.810683@0]- fb: osd_update_disp_axis_hw:dispdata(0,0,31,31) [ 694.852355@0]- vout sys: update date: 0x0bb5007d [ 694.852357@0]- DOLBY: vout_notify_callback: VOUT_EVENT_MODE_CHANGE [ 694.852360@0]- vlock: event MODE_CHANGE [ 694.853329@0]- hdmitx: system: store_phy 1 [ 694.893999@0]h detect vout mode change!!!!!!!!!!!! [ 694.936871@0]- audio_dsp: buf=2 [ 694.936906@0]- audio_dsp: IEC958_mode_raw=2 [ 694.944189@0]- audio_ddr_mngr: frddrs[1] registered by device fe330000.audiobus:spdif@1 [ 694.944863@0]- set 4x audio clk for 958 [ 694.944896@0]- set spdifout clk:98304000, mpll:393216000 [ 694.944899@0]- get spdifout clk:98303212, mpll:393212848 [ 694.944900@0]- set 4x audio clk for 958 [ 694.944906@0]- set spdifout clk:98304000, mpll:393216000 [ 694.944909@0]- get spdifout clk:98303212, mpll:393212848 [ 694.944914@0]- set 4x audio clk for 958 [ 694.944920@0]- set spdifout clk:98304000, mpll:393216000 [ 694.944922@0]- get spdifout clk:98303212, mpll:393212848 [ 694.944925@0]- set 4x audio clk for 958 [ 694.944931@0]- set spdifout clk:98304000, mpll:393216000 [ 694.944933@0]- get spdifout clk:98303212, mpll:393212848 [ 694.945036@0]- iec_info: rate: 192000, codec_type:0x7, channel status L:0x9001902, R:0x9001902 [ 694.945043@0]- hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 694.945044@0]- hdmitx: err chn msk, must larger than 0 [ 694.945059@0]- aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 694.945064@0]- iec_info: rate: 192000, codec_type:0x7, channel status L:0x9001902, R:0x9001902 [ 694.945067@0]- hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 694.945068@0]- hdmitx: err chn msk, must larger than 0 [ 694.945076@0]- aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 694.945275@0]- iec_info: rate: 192000, codec_type:0x7, channel status L:0x9001902, R:0x9001902 [ 694.945279@0]- hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 694.945280@0]- hdmitx: err chn msk, must larger than 0 [ 694.945290@0]- aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 694.945295@0]- iec_info: rate: 192000, codec_type:0x7, channel status L:0x9001902, R:0x9001902 [ 694.945298@0]- hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 694.945299@0]- hdmitx: err chn msk, must larger than 0 [ 694.945307@0]- aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 694.953802@3]- asoc-aml-card auge_sound: S/PDIF[1] Playback enable [ 694.953915@3]- asoc-aml-card auge_sound: S/PDIF[1] Playback enable [ 703.572152@2]- vframe_rate_uevent: sent uevent FRAME_RATE_HINT=0 [ 703.572213@1]- vdec_disable_DMC input->target= 0x0 [ 703.572270@1]- amvdec_h264mvc_remove [ 703.572353@1]- PPMGRVPP: info: task: quit [ 703.572399@1]- ppmgr local_init [ 703.572414@1]- dim:ch[0]:di_receiver_event_fun,1:_UNREG [ 703.572426@1]- use keep buffer keep frame! [ 703.572447@1]- vf_keep_current_locked: keep video successful! [ 703.572452@1]- video_vf_unreg_provider: vd1 used: true, vd2 used: false, keep_ret:1, black_out:0, cur_dispbuf:00000000861d125e [ 703.572457@1]d video first pts = 0 [ 703.572461@1]- VD1 AFBC 0x0. [ 703.572526@0]- dim:unreg:2keep[0], msk:[0x0,0x0] [ 703.580296@0]- Error: vf_notify_receiver, fail to get receiver of provider amlvideo [ 703.583695@2]- dim:unreg:use[11]ms [ 703.584733@2]- vdec mux clock is 799999987 Hz [ 703.584741@2]- vdec1 video changed to 0 x 0 0 fps clk->800MHZ [ 703.584744@2]- pts missed 0, pts hit 0, pts_outside 1, [ 703.584746@2]- duration 4004, sync_outside 0 [ 703.584748@2]- view_total = 392, dropped 0 [ 703.584991@2]- pts_stop, type=0 [ 703.585112@2]- vdec_release instance 0000000031db8e0f, total 1 id = 0 [ 703.585161@2]- the clk_vdec_mux clock off, ref cnt: 0 [ 703.585179@2]- the vdec clock off, ref cnt: 0 [ 703.585517@2]- the vdec clock on, ref cnt: 1 [ 703.585530@2]- the clk_vdec_mux clock on, ref cnt: 1 [ 703.585593@2]- vdec mux clock is 799999987 Hz [ 703.585794@2]- vdec_create instance 00000000b4e88237, total 1, PM: pd-sec-api [ 703.585877@2]- vdec_init, dev_name:amvdec_h264mvc, vdec_type=VDEC_TYPE_SINGLE id = 0 [ 703.585885@2]- vdec_enable_DMC input->target= 0x0 [ 703.586552@2]- pts_start, type=0 [ 703.587215@2]- video first pts = 0 [ 703.587233@2]- [0]: [VIDEO-stbuf-0] addr: cd800000, size: a00000, thrRW: 1, extbuf: 0, secure: 0 [ 703.587914@2]- amvdec_h264mvc probe start. [ 703.587944@2]- [ 703.587944@2]- vh264mvc_init [ 703.587957@2]- decoder_bmmu_box_alloc_box, tvp_flags = 0 [ 703.588209@2]- vdec_request_irq 00000000c47335c1, vh264mvc-irq [ 703.588234@2]- ppmgr local_init [ 703.588345@2]- ppmgr local_init [ 703.588414@2]- dim:ch[0]:di_receiver_event_fun,8:_REG [ 703.588417@2]- dim:reg:amlvideo[2] [ 703.588942@2]- dim:reg:use[0]ms [ 703.588956@2]- dim:ch[0]:di_receiver_event_fun,3:_START [ 703.588964@2]- amvdec_h264mvc probe end. [ 703.589004@2]- vdec_init, vf_provider_name = , b 0 [ 703.589017@2]- vdec->port_flag=0x102, port_flag=0x103 [ 704.542515@2]d video first checkin pts = 1b92715 [ 704.542522@2]d [pts_kpi] first check in vpts <0xf4:0x1b92715(0x1325b249)> ok! [ 704.547981@2]- vdec mux clock is 799999987 Hz [ 704.547996@2]- vdec1 video changed to 1920 x 1080 46 fps clk->800MHZ [ 705.308285@2]h [pts_kpi] first lookup vpts=0x1b92715 offset:0x190 [ 705.906137@0]- dim:value reg:ch[0]:fix_buf:0;ponly <0,0> [ 705.906150@0]- dim:1920x1080-0x10. [ 705.946722@0]h [tsync_avevent_locked 1064]VIDEO_START-tsync_mode:0(S) [ 705.946728@0]h pcr:0x0,param:0x1b92715,vpts:0x1b92715,apts:0xffffffff [ 705.946732@0]h video first pts = 1b92715 [ 705.946853@0]h new frame show, free keeper [ 735.295331@2]- asoc-aml-card auge_sound: S/PDIF[1] Playback disable [ 735.295350@2]- audio_ddr_mngr: frddr stop success, fifo id 1, regbase:0x80, arb sts:0x40000020 [ 735.295354@2]- asoc-aml-card auge_sound: S/PDIF[1] Playback disable [ 735.295418@2]- iec_info: rate: 192000, codec_type:0x7, channel status L:0x9001902, R:0x9001902 [ 735.295426@2]- hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 735.295428@2]- hdmitx: err chn msk, must larger than 0 [ 735.295442@2]- aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 735.295448@2]- iec_info: rate: 192000, codec_type:0x7, channel status L:0x9001902, R:0x9001902 [ 735.295451@2]- hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 735.295452@2]- hdmitx: err chn msk, must larger than 0 [ 735.295459@2]- aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 735.295858@2]- spdif_b keep clk continuous [ 735.295862@2]- spdif_b keep clk continuous [ 735.295957@2]- audio_ddr_mngr: frddrs[1] released by device fe330000.audiobus:spdif@1 [ 735.296710@2]- hdmitx: system: store_phy 1 [ 735.352150@3]- audio_dsp: buf=2 [ 735.352157@3]- audio_dsp: IEC958_mode_raw=2 [ 735.359076@3]- audio_ddr_mngr: frddrs[1] registered by device fe330000.audiobus:spdif@1 [ 735.359705@3]- set 4x audio clk for 958 [ 735.359737@3]- set spdifout clk:98304000, mpll:393216000 [ 735.359741@3]- get spdifout clk:98303212, mpll:393212848 [ 735.359787@3]- set 4x audio clk for 958 [ 735.359797@3]- set spdifout clk:98304000, mpll:393216000 [ 735.359800@3]- get spdifout clk:98303212, mpll:393212848 [ 735.359806@3]- set 4x audio clk for 958 [ 735.359812@3]- set spdifout clk:98304000, mpll:393216000 [ 735.359815@3]- get spdifout clk:98303212, mpll:393212848 [ 735.359818@3]- set 4x audio clk for 958 [ 735.359824@3]- set spdifout clk:98304000, mpll:393216000 [ 735.359826@3]- get spdifout clk:98303212, mpll:393212848 [ 735.359934@3]- iec_info: rate: 192000, codec_type:0x7, channel status L:0x9001902, R:0x9001902 [ 735.359940@3]- hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 735.359942@3]- hdmitx: err chn msk, must larger than 0 [ 735.359956@3]- aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 735.359962@3]- iec_info: rate: 192000, codec_type:0x7, channel status L:0x9001902, R:0x9001902 [ 735.359965@3]- hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 735.359966@3]- hdmitx: err chn msk, must larger than 0 [ 735.359973@3]- aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 735.360139@3]- iec_info: rate: 192000, codec_type:0x7, channel status L:0x9001902, R:0x9001902 [ 735.360144@3]- hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 735.360144@3]- hdmitx: err chn msk, must larger than 0 [ 735.360154@3]- aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 735.360159@3]- iec_info: rate: 192000, codec_type:0x7, channel status L:0x9001902, R:0x9001902 [ 735.360162@3]- hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 735.360163@3]- hdmitx: err chn msk, must larger than 0 [ 735.360173@3]- aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 735.361610@1]- asoc-aml-card auge_sound: S/PDIF[1] Playback enable [ 735.361737@1]- asoc-aml-card auge_sound: S/PDIF[1] Playback enable [ 742.694623@1]- vframe_rate_uevent: sent uevent FRAME_RATE_HINT=0 [ 742.694685@1]- vdec_disable_DMC input->target= 0x0 [ 742.694739@1]- amvdec_h264mvc_remove [ 742.694824@2]- PPMGRVPP: info: task: quit [ 742.694870@2]- ppmgr local_init [ 742.694882@2]- dim:ch[0]:di_receiver_event_fun,1:_UNREG [ 742.694892@2]- use keep buffer keep frame! [ 742.694906@2]- vf_keep_current_locked: keep video successful! [ 742.694910@2]- video_vf_unreg_provider: vd1 used: true, vd2 used: false, keep_ret:1, black_out:0, cur_dispbuf:00000000861d125e [ 742.694914@2]d video first pts = 0 [ 742.694917@2]- VD1 AFBC 0x0. [ 742.694919@0]- pattern detected = 2, pts_enter_pattern_cnt =1, pts_exit_pattern_cnt =1 [ 742.694971@0]- dim:unreg:2keep[0], msk:[0x0,0x0] [ 742.706073@3]- dim:unreg:use[12]ms [ 742.707003@3]- vdec mux clock is 799999987 Hz [ 742.707010@3]- vdec1 video changed to 0 x 0 0 fps clk->800MHZ [ 742.707013@3]- pts missed 0, pts hit 0, pts_outside 1, [ 742.707015@3]- duration 4004, sync_outside 0 [ 742.707016@3]- view_total = 1040, dropped 0 [ 742.707285@3]- pts_stop, type=0 [ 742.707428@3]- vdec_release instance 00000000b4e88237, total 1 id = 0 [ 742.707471@3]- the clk_vdec_mux clock off, ref cnt: 0 [ 742.707488@3]- the vdec clock off, ref cnt: 0 [ 742.707619@3]- the vdec clock on, ref cnt: 1 [ 742.707630@3]- the clk_vdec_mux clock on, ref cnt: 1 [ 742.707690@3]- vdec mux clock is 799999987 Hz [ 742.707949@3]- vdec_create instance 00000000b86a88ce, total 1, PM: pd-sec-api [ 742.708041@3]- vdec_init, dev_name:amvdec_h264mvc, vdec_type=VDEC_TYPE_SINGLE id = 0 [ 742.708048@3]- vdec_enable_DMC input->target= 0x0 [ 742.708702@3]- pts_start, type=0 [ 742.709270@3]- video first pts = 0 [ 742.709275@3]- [0]: [VIDEO-stbuf-0] addr: cd800000, size: a00000, thrRW: 1, extbuf: 0, secure: 0 [ 742.709716@3]- amvdec_h264mvc probe start. [ 742.709743@3]- [ 742.709743@3]- vh264mvc_init [ 742.709754@3]- decoder_bmmu_box_alloc_box, tvp_flags = 0 [ 742.709959@3]- vdec_request_irq 00000000c47335c1, vh264mvc-irq [ 742.709981@3]- ppmgr local_init [ 742.710087@3]- ppmgr local_init [ 742.710173@2]- dim:ch[0]:di_receiver_event_fun,8:_REG [ 742.710177@2]- dim:reg:amlvideo[3] [ 742.710707@2]- dim:reg:use[0]ms [ 742.710721@2]- dim:ch[0]:di_receiver_event_fun,3:_START [ 742.710733@2]- amvdec_h264mvc probe end. [ 742.710776@2]- vdec_init, vf_provider_name = , b 0 [ 742.710790@2]- vdec->port_flag=0x102, port_flag=0x103 [ 747.238682@0]- vframe_rate_uevent: sent uevent FRAME_RATE_HINT=0 [ 747.239820@0]- vdec_disable_DMC input->target= 0x0 [ 747.239878@0]- amvdec_h264mvc_remove [ 747.240238@3]- PPMGRVPP: info: task: quit [ 747.240274@0]- ppmgr local_init [ 747.240290@0]- dim:ch[0]:di_receiver_event_fun,1:_UNREG [ 747.240300@0]- use keep buffer keep frame! [ 747.240308@0]- vf_keep_current_locked: keep video successful! [ 747.240313@0]- video_vf_unreg_provider: vd1 used: true, vd2 used: false, keep_ret:1, black_out:0, cur_dispbuf:00000000861d125e [ 747.240317@0]- VD1 AFBC 0x0. [ 747.240851@0]- dim:unreg:use[0]ms [ 747.240887@0]- pts missed 0, pts hit 0, pts_outside 1, [ 747.240889@0]- duration 4004, sync_outside 0 [ 747.240891@0]- view_total = 0, dropped 0 [ 747.241078@0]- pts_stop, type=0 [ 747.241164@0]- vdec_release instance 00000000b86a88ce, total 1 id = 0 [ 747.241208@0]- the clk_vdec_mux clock off, ref cnt: 0 [ 747.241225@0]- the vdec clock off, ref cnt: 0 [ 747.241370@0]- the vdec clock on, ref cnt: 1 [ 747.241381@0]- the clk_vdec_mux clock on, ref cnt: 1 [ 747.241439@0]- vdec mux clock is 799999987 Hz [ 747.241640@0]- vdec_create instance 00000000fa6b5c16, total 1, PM: pd-sec-api [ 747.241730@0]- vdec_init, dev_name:amvdec_h264mvc, vdec_type=VDEC_TYPE_SINGLE id = 0 [ 747.241739@0]- vdec_enable_DMC input->target= 0x0 [ 747.242566@2]- pts_start, type=0 [ 747.243115@2]- video first pts = 0 [ 747.243121@2]- [0]: [VIDEO-stbuf-0] addr: cd800000, size: a00000, thrRW: 1, extbuf: 0, secure: 0 [ 747.243516@2]- amvdec_h264mvc probe start. [ 747.243541@2]- [ 747.243541@2]- vh264mvc_init [ 747.243552@2]- decoder_bmmu_box_alloc_box, tvp_flags = 0 [ 747.243741@2]- vdec_request_irq 00000000c47335c1, vh264mvc-irq [ 747.243803@2]- ppmgr local_init [ 747.244399@2]- ppmgr local_init [ 747.244875@2]- dim:ch[0]:di_receiver_event_fun,8:_REG [ 747.244880@2]- dim:reg:amlvideo[4] [ 747.245417@2]- dim:reg:use[1]ms [ 747.245442@2]- dim:ch[0]:di_receiver_event_fun,3:_START [ 747.245452@2]- amvdec_h264mvc probe end. [ 747.245489@2]- vdec_init, vf_provider_name = , b 0 [ 747.245503@2]- vdec->port_flag=0x102, port_flag=0x103 [ 752.120863@0]- vframe_rate_uevent: sent uevent FRAME_RATE_HINT=0 [ 752.120904@0]- vdec_disable_DMC input->target= 0x0 [ 752.120970@0]- amvdec_h264mvc_remove [ 752.121037@0]- PPMGRVPP: info: task: quit [ 752.121091@0]- ppmgr local_init [ 752.121104@0]- dim:ch[0]:di_receiver_event_fun,1:_UNREG [ 752.121113@0]- use keep buffer keep frame! [ 752.121121@0]- vf_keep_current_locked: keep video successful! [ 752.121125@0]- video_vf_unreg_provider: vd1 used: true, vd2 used: false, keep_ret:1, black_out:0, cur_dispbuf:00000000861d125e [ 752.121127@0]- VD1 AFBC 0x0. [ 752.121727@0]- dim:unreg:use[0]ms [ 752.121765@0]- pts missed 0, pts hit 0, pts_outside 1, [ 752.121767@0]- duration 4004, sync_outside 0 [ 752.121769@0]- view_total = 0, dropped 0 [ 752.122064@0]- pts_stop, type=0 [ 752.122136@0]- vdec_release instance 00000000fa6b5c16, total 1 id = 0 [ 752.122200@0]- the clk_vdec_mux clock off, ref cnt: 0 [ 752.122216@0]- the vdec clock off, ref cnt: 0 [ 752.122404@0]- the vdec clock on, ref cnt: 1 [ 752.122422@0]- the clk_vdec_mux clock on, ref cnt: 1 [ 752.122489@0]- vdec mux clock is 799999987 Hz [ 752.122694@0]- vdec_create instance 0000000080c4b5bc, total 1, PM: pd-sec-api [ 752.122797@0]- vdec_init, dev_name:amvdec_h264mvc, vdec_type=VDEC_TYPE_SINGLE id = 0 [ 752.122806@0]- vdec_enable_DMC input->target= 0x0 [ 752.124071@1]- pts_start, type=0 [ 752.124730@1]- video first pts = 0 [ 752.124738@1]- [0]: [VIDEO-stbuf-0] addr: cd800000, size: a00000, thrRW: 1, extbuf: 0, secure: 0 [ 752.125307@1]- amvdec_h264mvc probe start. [ 752.125330@1]- [ 752.125330@1]- vh264mvc_init [ 752.125342@1]- decoder_bmmu_box_alloc_box, tvp_flags = 0 [ 752.126491@0]- vdec_request_irq 00000000c47335c1, vh264mvc-irq [ 752.126518@0]- ppmgr local_init [ 752.126680@0]- ppmgr local_init [ 752.126828@0]- dim:ch[0]:di_receiver_event_fun,8:_REG [ 752.126832@0]- dim:reg:amlvideo[5] [ 752.127410@1]- dim:reg:use[1]ms [ 752.127435@1]- dim:ch[0]:di_receiver_event_fun,3:_START [ 752.127450@1]- amvdec_h264mvc probe end. [ 752.127500@1]- vdec_init, vf_provider_name = , b 0 [ 752.127515@1]- vdec->port_flag=0x102, port_flag=0x103 [ 759.377313@3]- vframe_rate_uevent: sent uevent FRAME_RATE_HINT=0 [ 759.377377@0]- vdec_disable_DMC input->target= 0x0 [ 759.377439@0]- amvdec_h264mvc_remove [ 759.377524@0]- PPMGRVPP: info: task: quit [ 759.377565@0]- ppmgr local_init [ 759.377576@0]- dim:ch[0]:di_receiver_event_fun,1:_UNREG [ 759.377585@0]- use keep buffer keep frame! [ 759.377593@0]- vf_keep_current_locked: keep video successful! [ 759.377598@0]- video_vf_unreg_provider: vd1 used: true, vd2 used: false, keep_ret:1, black_out:0, cur_dispbuf:00000000861d125e [ 759.377601@0]- VD1 AFBC 0x0. [ 759.377645@0]- dim:unreg:use[0]ms [ 759.377675@0]- pts missed 0, pts hit 0, pts_outside 1, [ 759.377677@0]- duration 4004, sync_outside 0 [ 759.377678@0]- view_total = 0, dropped 0 [ 759.378679@0]- pts_stop, type=0 [ 759.378823@0]- vdec_release instance 0000000080c4b5bc, total 1 id = 0 [ 759.378876@0]- the clk_vdec_mux clock off, ref cnt: 0 [ 759.378893@0]- the vdec clock off, ref cnt: 0 [ 759.379032@0]- the vdec clock on, ref cnt: 1 [ 759.379047@0]- the clk_vdec_mux clock on, ref cnt: 1 [ 759.379108@0]- vdec mux clock is 799999987 Hz [ 759.379313@0]- vdec_create instance 000000006c6bbb00, total 1, PM: pd-sec-api [ 759.379389@0]- vdec_init, dev_name:amvdec_h264mvc, vdec_type=VDEC_TYPE_SINGLE id = 0 [ 759.379398@0]- vdec_enable_DMC input->target= 0x0 [ 759.380737@0]- pts_start, type=0 [ 759.381366@0]- video first pts = 0 [ 759.381373@0]- [0]: [VIDEO-stbuf-0] addr: cd800000, size: a00000, thrRW: 1, extbuf: 0, secure: 0 [ 759.382281@0]- amvdec_h264mvc probe start. [ 759.382307@0]- [ 759.382307@0]- vh264mvc_init [ 759.382319@0]- decoder_bmmu_box_alloc_box, tvp_flags = 0 [ 759.382618@0]- vdec_request_irq 00000000c47335c1, vh264mvc-irq [ 759.382649@0]- ppmgr local_init [ 759.382776@0]- ppmgr local_init [ 759.382875@0]- dim:ch[0]:di_receiver_event_fun,8:_REG [ 759.382879@0]- dim:reg:amlvideo[6] [ 759.383005@0]- dim:reg:use[0]ms [ 759.383028@0]- dim:ch[0]:di_receiver_event_fun,3:_START [ 759.383044@0]- amvdec_h264mvc probe end. [ 759.383091@0]- vdec_init, vf_provider_name = , b 0 [ 759.383117@0]- vdec->port_flag=0x102, port_flag=0x103 [ 764.344074@3]- vframe_rate_uevent: sent uevent FRAME_RATE_HINT=0 [ 764.344144@0]- vdec_disable_DMC input->target= 0x0 [ 764.344219@0]- amvdec_h264mvc_remove [ 764.344314@0]- PPMGRVPP: info: task: quit [ 764.344361@0]- ppmgr local_init [ 764.344375@0]- dim:ch[0]:di_receiver_event_fun,1:_UNREG [ 764.344385@0]- use keep buffer keep frame! [ 764.344393@0]- vf_keep_current_locked: keep video successful! [ 764.344398@0]- video_vf_unreg_provider: vd1 used: true, vd2 used: false, keep_ret:1, black_out:0, cur_dispbuf:00000000861d125e [ 764.344401@0]- VD1 AFBC 0x0. [ 764.345913@2]- dim:unreg:use[1]ms [ 764.345962@2]- pts missed 0, pts hit 0, pts_outside 1, [ 764.345964@2]- duration 4004, sync_outside 0 [ 764.345966@2]- view_total = 0, dropped 0 [ 764.346252@2]- pts_stop, type=0 [ 764.346334@2]- vdec_release instance 000000006c6bbb00, total 1 id = 0 [ 764.346392@2]- the clk_vdec_mux clock off, ref cnt: 0 [ 764.346409@2]- the vdec clock off, ref cnt: 0 [ 764.346560@2]- the vdec clock on, ref cnt: 1 [ 764.346571@2]- the clk_vdec_mux clock on, ref cnt: 1 [ 764.346631@2]- vdec mux clock is 799999987 Hz [ 764.346838@2]- vdec_create instance 00000000ecb44caa, total 1, PM: pd-sec-api [ 764.346922@2]- vdec_init, dev_name:amvdec_h264mvc, vdec_type=VDEC_TYPE_SINGLE id = 0 [ 764.346929@2]- vdec_enable_DMC input->target= 0x0 [ 764.347726@1]- pts_start, type=0 [ 764.348302@1]- video first pts = 0 [ 764.348310@1]- [0]: [VIDEO-stbuf-0] addr: cd800000, size: a00000, thrRW: 1, extbuf: 0, secure: 0 [ 764.349201@1]- amvdec_h264mvc probe start. [ 764.349224@1]- [ 764.349224@1]- vh264mvc_init [ 764.349237@1]- decoder_bmmu_box_alloc_box, tvp_flags = 0 [ 764.349508@3]- vdec_request_irq 00000000c47335c1, vh264mvc-irq [ 764.349532@3]- ppmgr local_init [ 764.349644@3]- ppmgr local_init [ 764.349713@3]- dim:ch[0]:di_receiver_event_fun,8:_REG [ 764.349717@3]- dim:reg:amlvideo[7] [ 764.350248@3]- dim:reg:use[1]ms [ 764.350265@3]- dim:ch[0]:di_receiver_event_fun,3:_START [ 764.350275@3]- amvdec_h264mvc probe end. [ 764.350318@3]- vdec_init, vf_provider_name = , b 0 [ 764.350334@3]- vdec->port_flag=0x102, port_flag=0x103 [ 768.471947@2]- vframe_rate_uevent: sent uevent FRAME_RATE_HINT=0 [ 768.472130@0]- vdec_disable_DMC input->target= 0x0 [ 768.472286@0]- amvdec_h264mvc_remove [ 768.472350@2]- PPMGRVPP: info: task: quit [ 768.472403@2]- ppmgr local_init [ 768.472416@2]- dim:ch[0]:di_receiver_event_fun,1:_UNREG [ 768.472425@2]- use keep buffer keep frame! [ 768.472434@2]- vf_keep_current_locked: keep video successful! [ 768.472438@2]- video_vf_unreg_provider: vd1 used: true, vd2 used: false, keep_ret:1, black_out:0, cur_dispbuf:00000000861d125e [ 768.472441@2]- VD1 AFBC 0x0. [ 768.472984@2]- dim:unreg:use[0]ms [ 768.473024@2]- pts missed 0, pts hit 0, pts_outside 1, [ 768.473026@2]- duration 4004, sync_outside 0 [ 768.473028@2]- view_total = 0, dropped 0 [ 768.473323@2]- pts_stop, type=0 [ 768.473402@2]- vdec_release instance 00000000ecb44caa, total 1 id = 0 [ 768.473474@2]- the clk_vdec_mux clock off, ref cnt: 0 [ 768.473492@2]- the vdec clock off, ref cnt: 0 [ 768.473609@2]- the vdec clock on, ref cnt: 1 [ 768.473621@2]- the clk_vdec_mux clock on, ref cnt: 1 [ 768.473683@2]- vdec mux clock is 799999987 Hz [ 768.473890@2]- vdec_create instance 00000000779b4190, total 1, PM: pd-sec-api [ 768.473981@2]- vdec_init, dev_name:amvdec_h264mvc, vdec_type=VDEC_TYPE_SINGLE id = 0 [ 768.473991@2]- vdec_enable_DMC input->target= 0x0 [ 768.475202@2]- pts_start, type=0 [ 768.475829@2]- video first pts = 0 [ 768.475836@2]- [0]: [VIDEO-stbuf-0] addr: cd800000, size: a00000, thrRW: 1, extbuf: 0, secure: 0 [ 768.476253@2]- amvdec_h264mvc probe start. [ 768.476276@2]- [ 768.476276@2]- vh264mvc_init [ 768.476287@2]- decoder_bmmu_box_alloc_box, tvp_flags = 0 [ 768.476619@3]- vdec_request_irq 00000000c47335c1, vh264mvc-irq [ 768.476645@3]- ppmgr local_init [ 768.476768@3]- ppmgr local_init [ 768.476851@3]- dim:ch[0]:di_receiver_event_fun,8:_REG [ 768.476855@3]- dim:reg:amlvideo[8] [ 768.477386@3]- dim:reg:use[1]ms [ 768.477403@3]- dim:ch[0]:di_receiver_event_fun,3:_START [ 768.477412@3]- amvdec_h264mvc probe end. [ 768.477459@3]- vdec_init, vf_provider_name = , b 0 [ 768.477472@3]- vdec->port_flag=0x102, port_flag=0x103 [ 769.261886@1]- vframe_rate_uevent: sent uevent FRAME_RATE_HINT=0 [ 769.262023@1]- vdec_disable_DMC input->target= 0x0 [ 769.262088@1]- amvdec_h264mvc_remove [ 769.262160@1]- PPMGRVPP: info: task: quit [ 769.262211@1]- ppmgr local_init [ 769.262223@1]- dim:ch[0]:di_receiver_event_fun,1:_UNREG [ 769.262232@1]- use keep buffer keep frame! [ 769.262282@1]- vf_keep_current_locked: keep video successful! [ 769.262287@1]- video_vf_unreg_provider: vd1 used: true, vd2 used: false, keep_ret:1, black_out:0, cur_dispbuf:00000000861d125e [ 769.262290@1]- VD1 AFBC 0x0. [ 769.262823@1]- dim:unreg:use[0]ms [ 769.262859@1]- pts missed 0, pts hit 0, pts_outside 1, [ 769.262862@1]- duration 4004, sync_outside 0 [ 769.262863@1]- view_total = 0, dropped 0 [ 769.263426@1]- pts_stop, type=0 [ 769.263500@1]- vdec_release instance 00000000779b4190, total 1 id = 0 [ 769.263563@1]- the clk_vdec_mux clock off, ref cnt: 0 [ 769.263581@1]- the vdec clock off, ref cnt: 0 [ 769.263696@1]- the vdec clock on, ref cnt: 1 [ 769.263706@1]- the clk_vdec_mux clock on, ref cnt: 1 [ 769.265118@1]- vdec mux clock is 799999987 Hz [ 769.265334@1]- vdec_create instance 00000000beeb747a, total 1, PM: pd-sec-api [ 769.265437@1]- vdec_init, dev_name:amvdec_h264mvc, vdec_type=VDEC_TYPE_SINGLE id = 0 [ 769.265444@1]- vdec_enable_DMC input->target= 0x0 [ 769.266048@1]- pts_start, type=0 [ 769.266606@1]- video first pts = 0 [ 769.266612@1]- [0]: [VIDEO-stbuf-0] addr: cd800000, size: a00000, thrRW: 1, extbuf: 0, secure: 0 [ 769.269459@2]- amvdec_h264mvc probe start. [ 769.269504@2]- [ 769.269504@2]- vh264mvc_init [ 769.269520@2]- decoder_bmmu_box_alloc_box, tvp_flags = 0 [ 769.269840@2]- vdec_request_irq 00000000c47335c1, vh264mvc-irq [ 769.269865@2]- ppmgr local_init [ 769.272408@2]- ppmgr local_init [ 769.274046@3]- dim:ch[0]:di_receiver_event_fun,8:_REG [ 769.274053@3]- dim:reg:amlvideo[9] [ 769.274607@3]- dim:reg:use[0]ms [ 769.274637@3]- dim:ch[0]:di_receiver_event_fun,3:_START [ 769.274649@3]- amvdec_h264mvc probe end. [ 769.274711@3]- vdec_init, vf_provider_name = , b 0 [ 769.274725@3]- vdec->port_flag=0x102, port_flag=0x103 [ 769.275335@3]d video first checkin pts = 1f65341 [ 769.275338@3]d [pts_kpi] first check in vpts <0xf4:0x1f65341(0x15cd6432)> ok! [ 769.284037@3]- vdec mux clock is 799999987 Hz [ 769.284051@3]- vdec1 video changed to 1920 x 1080 46 fps clk->800MHZ [ 769.958344@2]h [pts_kpi] first lookup vpts=0x1f65341 offset:0x190 [ 770.018402@0]- dim:value reg:ch[0]:fix_buf:0;ponly <0,0> [ 770.018434@0]- dim:1920x1080-0x10. [ 770.052544@0]h [tsync_avevent_locked 1064]VIDEO_START-tsync_mode:0(S) [ 770.052557@0]h pcr:0x0,param:0x1f65341,vpts:0x1f65341,apts:0xffffffff [ 770.052563@0]h video first pts = 1f65341 [ 770.052834@0]h new frame show, free keeper [ 819.732935@3]- vframe_rate_uevent: sent uevent FRAME_RATE_HINT=0 [ 819.733001@3]- vdec_disable_DMC input->target= 0x0 [ 819.733057@3]- amvdec_h264mvc_remove [ 819.733121@3]- PPMGRVPP: info: task: quit [ 819.733174@3]- ppmgr local_init [ 819.733185@3]- dim:ch[0]:di_receiver_event_fun,1:_UNREG [ 819.733195@3]- use keep buffer keep frame! [ 819.733208@3]- vf_keep_current_locked: keep video successful! [ 819.733213@3]- video_vf_unreg_provider: vd1 used: true, vd2 used: false, keep_ret:1, black_out:0, cur_dispbuf:00000000861d125e [ 819.733217@3]d video first pts = 0 [ 819.733219@3]- VD1 AFBC 0x0. [ 819.733222@0]- pattern detected = 2, pts_enter_pattern_cnt =1, pts_exit_pattern_cnt =1 [ 819.733275@0]- dim:unreg:2keep[0], msk:[0x0,0x0] [ 819.744400@3]- dim:unreg:use[11]ms [ 819.745337@3]- vdec mux clock is 799999987 Hz [ 819.745343@3]- vdec1 video changed to 0 x 0 0 fps clk->800MHZ [ 819.745346@3]- pts missed 0, pts hit 0, pts_outside 1, [ 819.745349@3]- duration 4004, sync_outside 0 [ 819.745350@3]- view_total = 1712, dropped 0 [ 819.745634@3]- pts_stop, type=0 [ 819.745773@3]- vdec_release instance 00000000beeb747a, total 1 id = 0 [ 819.745836@3]- the clk_vdec_mux clock off, ref cnt: 0 [ 819.745854@3]- the vdec clock off, ref cnt: 0 [ 819.746004@3]- the vdec clock on, ref cnt: 1 [ 819.746014@3]- the clk_vdec_mux clock on, ref cnt: 1 [ 819.746074@3]- vdec mux clock is 799999987 Hz [ 819.746279@3]- vdec_create instance 000000006764d8c1, total 1, PM: pd-sec-api [ 819.746363@3]- vdec_init, dev_name:amvdec_h264mvc, vdec_type=VDEC_TYPE_SINGLE id = 0 [ 819.746373@3]- vdec_enable_DMC input->target= 0x0 [ 819.747099@2]- pts_start, type=0 [ 819.747816@2]- video first pts = 0 [ 819.747825@2]- [0]: [VIDEO-stbuf-0] addr: cd800000, size: a00000, thrRW: 1, extbuf: 0, secure: 0 [ 819.748237@2]- amvdec_h264mvc probe start. [ 819.748262@2]- [ 819.748262@2]- vh264mvc_init [ 819.748273@2]- decoder_bmmu_box_alloc_box, tvp_flags = 0 [ 819.748477@2]- vdec_request_irq 00000000c47335c1, vh264mvc-irq [ 819.748500@2]- ppmgr local_init [ 819.750542@1]- ppmgr local_init [ 819.750664@2]- dim:ch[0]:di_receiver_event_fun,8:_REG [ 819.750668@2]- dim:reg:amlvideo[10] [ 819.751197@2]- dim:reg:use[1]ms [ 819.751213@2]- dim:ch[0]:di_receiver_event_fun,3:_START [ 819.751222@2]- amvdec_h264mvc probe end. [ 819.751268@2]- vdec_init, vf_provider_name = , b 0 [ 819.751280@2]- vdec->port_flag=0x102, port_flag=0x103 [ 824.693014@2]- vframe_rate_uevent: sent uevent FRAME_RATE_HINT=0 [ 824.693123@3]- vdec_disable_DMC input->target= 0x0 [ 824.693178@3]- amvdec_h264mvc_remove [ 824.693256@3]- PPMGRVPP: info: task: quit [ 824.693299@3]- ppmgr local_init [ 824.693311@3]- dim:ch[0]:di_receiver_event_fun,1:_UNREG [ 824.693320@3]- use keep buffer keep frame! [ 824.693328@3]- vf_keep_current_locked: keep video successful! [ 824.693333@3]- video_vf_unreg_provider: vd1 used: true, vd2 used: false, keep_ret:1, black_out:0, cur_dispbuf:00000000861d125e [ 824.693335@3]- VD1 AFBC 0x0. [ 824.693870@3]- dim:unreg:use[0]ms [ 824.693904@3]- pts missed 0, pts hit 0, pts_outside 1, [ 824.693906@3]- duration 4004, sync_outside 0 [ 824.693907@3]- view_total = 0, dropped 0 [ 824.695280@3]- pts_stop, type=0 [ 824.695340@3]- vdec_release instance 000000006764d8c1, total 1 id = 0 [ 824.695404@3]- the clk_vdec_mux clock off, ref cnt: 0 [ 824.695422@3]- the vdec clock off, ref cnt: 0 [ 824.695570@3]- the vdec clock on, ref cnt: 1 [ 824.695579@3]- the clk_vdec_mux clock on, ref cnt: 1 [ 824.695638@3]- vdec mux clock is 799999987 Hz [ 824.695873@3]- vdec_create instance 0000000083b730f9, total 1, PM: pd-sec-api [ 824.695959@3]- vdec_init, dev_name:amvdec_h264mvc, vdec_type=VDEC_TYPE_SINGLE id = 0 [ 824.695966@3]- vdec_enable_DMC input->target= 0x0 [ 824.697075@3]- pts_start, type=0 [ 824.698045@3]- video first pts = 0 [ 824.698056@3]- [0]: [VIDEO-stbuf-0] addr: cd800000, size: a00000, thrRW: 1, extbuf: 0, secure: 0 [ 824.698695@3]- amvdec_h264mvc probe start. [ 824.698720@3]- [ 824.698720@3]- vh264mvc_init [ 824.698731@3]- decoder_bmmu_box_alloc_box, tvp_flags = 0 [ 824.699718@2]- vdec_request_irq 00000000c47335c1, vh264mvc-irq [ 824.699788@2]- ppmgr local_init [ 824.700080@2]- ppmgr local_init [ 824.701261@3]- dim:ch[0]:di_receiver_event_fun,8:_REG [ 824.701266@3]- dim:reg:amlvideo[11] [ 824.701338@3]- dim:reg:use[0]ms [ 824.701351@3]- dim:ch[0]:di_receiver_event_fun,3:_START [ 824.701360@3]- amvdec_h264mvc probe end. [ 824.701405@3]- vdec_init, vf_provider_name = , b 0 [ 824.701420@3]- vdec->port_flag=0x102, port_flag=0x103 [ 824.774416@2]- vframe_rate_uevent: sent uevent FRAME_RATE_HINT=0 [ 824.774554@2]- vdec_disable_DMC input->target= 0x0 [ 824.774611@2]- amvdec_h264mvc_remove [ 824.774675@1]- PPMGRVPP: info: task: quit [ 824.774710@2]- ppmgr local_init [ 824.774721@2]- dim:ch[0]:di_receiver_event_fun,1:_UNREG [ 824.774731@2]- use keep buffer keep frame! [ 824.774740@2]- vf_keep_current_locked: keep video successful! [ 824.774744@2]- video_vf_unreg_provider: vd1 used: true, vd2 used: false, keep_ret:1, black_out:0, cur_dispbuf:00000000861d125e [ 824.774746@2]- VD1 AFBC 0x0. [ 824.775305@3]- dim:unreg:use[1]ms [ 824.775347@3]- pts missed 0, pts hit 0, pts_outside 1, [ 824.775350@3]- duration 4004, sync_outside 0 [ 824.775351@3]- view_total = 0, dropped 0 [ 824.775635@3]- pts_stop, type=0 [ 824.775693@3]- vdec_release instance 0000000083b730f9, total 1 id = 0 [ 824.775814@3]- the clk_vdec_mux clock off, ref cnt: 0 [ 824.775833@3]- the vdec clock off, ref cnt: 0 [ 824.775955@3]- the vdec clock on, ref cnt: 1 [ 824.775966@3]- the clk_vdec_mux clock on, ref cnt: 1 [ 824.776025@3]- vdec mux clock is 799999987 Hz [ 824.776225@3]- vdec_create instance 00000000ed932e43, total 1, PM: pd-sec-api [ 824.776306@3]- vdec_init, dev_name:amvdec_h264mvc, vdec_type=VDEC_TYPE_SINGLE id = 0 [ 824.776314@3]- vdec_enable_DMC input->target= 0x0 [ 824.778405@3]- pts_start, type=0 [ 824.778963@3]- video first pts = 0 [ 824.778969@3]- [0]: [VIDEO-stbuf-0] addr: cd800000, size: a00000, thrRW: 1, extbuf: 0, secure: 0 [ 824.779397@3]- amvdec_h264mvc probe start. [ 824.779424@3]- [ 824.779424@3]- vh264mvc_init [ 824.779442@3]- decoder_bmmu_box_alloc_box, tvp_flags = 0 [ 824.779650@3]- vdec_request_irq 00000000c47335c1, vh264mvc-irq [ 824.779673@3]- ppmgr local_init [ 824.780619@1]- ppmgr local_init [ 824.780748@1]- dim:ch[0]:di_receiver_event_fun,8:_REG [ 824.780752@1]- dim:reg:amlvideo[12] [ 824.781282@1]- dim:reg:use[1]ms [ 824.781300@1]- dim:ch[0]:di_receiver_event_fun,3:_START [ 824.781310@1]- amvdec_h264mvc probe end. [ 824.781342@1]- vdec_init, vf_provider_name = , b 0 [ 824.781356@1]- vdec->port_flag=0x102, port_flag=0x103 [ 825.993882@2]d video first checkin pts = 66e4666 [ 825.993888@2]d [pts_kpi] first check in vpts <0xf4:0x66e4666(0x4773f1cd)> ok! [ 826.007910@1]- vdec mux clock is 799999987 Hz [ 826.007929@1]- vdec1 video changed to 1920 x 1080 46 fps clk->800MHZ [ 826.915574@2]h [pts_kpi] first lookup vpts=0x66e4666 offset:0x190 [ 827.113837@3]- dim:value reg:ch[0]:fix_buf:0;ponly <0,0> [ 827.113862@3]- dim:1920x1080-0x10. [ 827.151309@0]h [tsync_avevent_locked 1064]VIDEO_START-tsync_mode:0(S) [ 827.151321@0]h pcr:0x0,param:0x66e4666,vpts:0x66e4666,apts:0xffffffff [ 827.151327@0]h video first pts = 66e4666 [ 827.151648@0]h new frame show, free keeper [ 876.612438@0]- vframe_rate_uevent: sent uevent FRAME_RATE_HINT=0 [ 876.612492@0]- vdec_disable_DMC input->target= 0x0 [ 876.612550@0]- amvdec_h264mvc_remove [ 876.612610@0]- PPMGRVPP: info: task: quit [ 876.612668@0]- ppmgr local_init [ 876.612681@0]- dim:ch[0]:di_receiver_event_fun,1:_UNREG [ 876.612697@0]- disabled amvideo on vd1 for next before free keep buffer! [ 876.612699@0]- VID: VD1 off [ 876.612702@0]- keep exit is skip current [ 876.612706@0]- video_vf_unreg_provider: vd1 used: true, vd2 used: false, keep_ret:0, black_out:1, cur_dispbuf:00000000861d125e [ 876.612711@0]d video first pts = 0 [ 876.612712@0]- keep frame skip, disable video again. [ 876.612714@0]- disabled amvideo on vd1 for next before free keep buffer! [ 876.612715@0]- VID: VD1 off [ 876.612716@0]- VD1 AFBC 0x0. [ 876.612718@1]- pattern detected = 2, pts_enter_pattern_cnt =2, pts_exit_pattern_cnt =2 [ 876.612762@1]- dim:unreg:2keep[0], msk:[0x0,0x0] [ 876.623838@2]- dim:unreg:use[11]ms [ 876.624805@2]- vdec mux clock is 799999987 Hz [ 876.624811@2]- vdec1 video changed to 0 x 0 0 fps clk->800MHZ [ 876.624814@2]- pts missed 0, pts hit 0, pts_outside 1, [ 876.624816@2]- duration 4004, sync_outside 0 [ 876.624818@2]- view_total = 1678, dropped 0 [ 876.625068@2]- pts_stop, type=0 [ 876.625226@2]- vdec_release instance 00000000ed932e43, total 1 id = 0 [ 876.625264@2]- the clk_vdec_mux clock off, ref cnt: 0 [ 876.625278@2]- the vdec clock off, ref cnt: 0 [ 876.630434@2]- enable_fel 0 [ 876.630483@2]- VID: VD1 off [ 876.630547@2]- vfm_map_store:rm default [ 876.630582@2]- vfm_map_store:add default [ 876.653283@0]- asoc-aml-card auge_sound: S/PDIF[1] Playback disable [ 876.653300@0]- audio_ddr_mngr: frddr stop success, fifo id 1, regbase:0x80, arb sts:0x40000020 [ 876.653305@0]- asoc-aml-card auge_sound: S/PDIF[1] Playback disable [ 876.653372@0]- iec_info: rate: 192000, codec_type:0x7, channel status L:0x9001902, R:0x9001902 [ 876.653380@0]- hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 876.653381@0]- hdmitx: err chn msk, must larger than 0 [ 876.653395@0]- aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 876.653400@0]- iec_info: rate: 192000, codec_type:0x7, channel status L:0x9001902, R:0x9001902 [ 876.653403@0]- hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 876.653404@0]- hdmitx: err chn msk, must larger than 0 [ 876.653412@0]- aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 876.653598@0]- spdif_b keep clk continuous [ 876.653600@0]- spdif_b keep clk continuous [ 876.653679@0]- audio_ddr_mngr: frddrs[1] released by device fe330000.audiobus:spdif@1 [ 876.654026@0]- audio_dsp: buf=0 [ 876.654028@0]- audio_dsp: IEC958_mode_raw=0 [ 876.659629@0]- audio_ddr_mngr: frddrs[1] registered by device fe330000.audiobus:i2s2hdmi [ 876.660915@0]- set mclk:11289600, mpll:22579200, get mclk:196606424, mpll:393212848 [ 876.660922@0]- asoc aml_dai_set_tdm_fmt, 0x4001, 0000000060ce2097, id(2), clksel(2) [ 876.660925@0]- aml_tdm_set_fmt(), fmt not change [ 876.660931@0]- dump_pcm_setting(0000000060ce2097) [ 876.660933@0]- pcm_mode(1) [ 876.660934@0]- sysclk(11289600) [ 876.660936@0]- sysclk_bclk_ratio(4) [ 876.660938@0]- bclk(2822400) [ 876.660939@0]- bclk_lrclk_ratio(64) [ 876.660940@0]- lrclk(44100) [ 876.660941@0]- tx_mask(0x3) [ 876.660942@0]- rx_mask(0x3) [ 876.660944@0]- slots(2) [ 876.660945@0]- slot_width(32) [ 876.660946@0]- lane_mask_in(0x0) [ 876.660947@0]- lane_mask_out(0xf) [ 876.660948@0]- lane_oe_mask_in(0x0) [ 876.660949@0]- lane_oe_mask_out(0x0) [ 876.660951@0]- lane_lb_mask_in(0x0) [ 876.660954@0]- set mclk:11289600, mpll:22579200, get mclk:196606424, mpll:393212848 [ 876.660955@0]- aml_tdm_set_clkdiv, div 4, clksel(2) [ 876.660961@0]- aml_set_bclk_ratio, select I2S mode [ 876.660967@0]- aml_tdm_hw_setting_init(), enable mclk for tdm-2 [ 876.661057@0]- aml_tdm_prepare(), reset fddr [ 876.661069@0]- hdmitx: hw: set audio [ 876.661073@0]- hdmitx: hw: hdmitx tx_aud_src = 1, audio_param->channel_num = 7, hdev->aud_output_ch = 33 [ 876.661086@0]- hdmitx: fs = 7, cd = 4, tmds_clk = 74176 [ 876.661088@0]- hdmitx: hw: aud_n_para = 46592 [ 876.661095@0]- hdmitx: hw: set channel status [ 876.687789@0]- hdmitx: hw: [0x10e3] = 0x1f [ 876.687813@0]- hdmitx: audio: Audio Type: MAT(MLP) [ 876.687818@0]- hdmitx: audio: aout notify format CT_PCM [ 876.687820@0]- hdmitx: audio: aout notify channel num: 2 [ 876.687821@0]- hdmitx: hw: set audio [ 876.687825@0]- hdmitx: hw: hdmitx tx_aud_src = 1, audio_param->channel_num = 1, hdev->aud_output_ch = 33 [ 876.687836@0]- hdmitx: fs = 2, cd = 4, tmds_clk = 74176 [ 876.687838@0]- hdmitx: hw: aud_n_para = 17836 [ 876.687845@0]- hdmitx: hw: set channel status [ 876.715771@0]- hdmitx: hw: [0x10e3] = 0x1f [ 876.715794@0]- hdmitx: audio: Audio Type: PCM [ 876.715796@0]- hdmitx: audio: set audio param [ 876.715941@0]- tdm playback mute: 0, lane_cnt = 4 [ 876.716188@0]- aml_tdm_prepare(), reset fddr [ 876.716325@2]- tdm playback mute: 0, lane_cnt = 4 [ 876.718505@2]- asoc-aml-card auge_sound: TDM[2] Playback enable [ 876.840067@0]- vout: vmode set to null [ 876.840173@0]- fb: current vmode=1080p24hz, cmd: 0x10000 [ 876.840178@0]- vlock: event MODE_CHANGE_PRE 0 [ 876.840217@0]h hdmitx: system: irq 80000001 0 [ 876.840240@0]- hdmitx: edid: not find mapped vic [ 876.840260@0]- vout: new mode null set ok [ 876.840261@0]- fb: current vmode=null, cmd: 0x20000 [ 876.840395@0]- hdmitx: system: set frac_rate_policy as 0 [ 876.840436@0]- vout: vmode set to 1080p60hz [ 876.840479@0]- fb: current vmode=null, cmd: 0x10000 [ 876.840485@0]- hdmitx: hdmitx_set_current_vmode[5644] [ 876.840487@0]- hdmitx: system: recalc before 1080p60hz 60 1, frac 0 [ 876.840489@0]- hdmitx: system: recalc after 1080p60hz 60 1, frac 0 [ 876.840491@0]- hdmitx: system: get current mode: 1080p60hz [ 876.840494@0]- hdmitx: system: update physical size: 1600 900 [ 876.840503@0]- hdmitx: hdmitx: display colourdepth is forced to 8 bits because of 3dfp mode (VIC: 16) [ 876.840523@0]- hdmitx: video: already init VIC = 0 Now VIC = 16 [ 876.840527@0]- hdmitx: hw: div40: 0 [ 876.873780@0]- hdmitx: frac_rate = 0 [ 876.873788@0]- hdmitx: config HPLL = 5940000 frac_rate = 0 [ 876.873860@0]- hdmitx: config HPLL done [ 876.873867@0]- hdmitx: set_hpll_od3_clk_div[687] div = 6 [ 876.873872@0]- hdmitx: j = 0 vid_clk_div = 1 [ 876.873886@0]- hdmitx: set enc for VIC: 16 [ 876.875897@0]- hdmitx: hw: config hdmitx IP vic = 16 cd:4 cs: 2 [ 876.886081@0]- hdmitx: video: Sink is HDMI device [ 876.886102@0]- hdmitx: hw: set audio [ 876.886107@0]- hdmitx: hw: hdmitx tx_aud_src = 1, audio_param->channel_num = 1, hdev->aud_output_ch = 33 [ 876.886118@0]- hdmitx: fs = 2, cd = 4, tmds_clk = 148500 [ 876.886121@0]- hdmitx: hw: aud_n_para = 6272 [ 876.886128@0]- hdmitx: hw: set channel status [ 876.886179@0]h hdmitx: system: irq 80000001 0 [ 876.911758@0]- hdmitx: hw: [0x10e3] = 0x1f [ 876.911778@0]- hdmitx: audio: Audio Type: PCM [ 876.911781@0]- hdmitx: system: update rx hdr info d [ 876.911786@0]- vout: new mode 1080p60hz set ok [ 876.911789@0]- fb: current vmode=1080p60hz, cmd: 0x20000 [ 876.911796@0]- fb: outputmode changed to 1080p60hz, reset osd0, (0, 0, 1919, 1079) -> (0, 0, 1919, 2204) [ 876.927729@0]- fb: osd_update_disp_axis_hw:pan_data(0,0,1919,1079) [ 876.927732@0]- fb: osd_update_disp_axis_hw:dispdata(0,0,1919,1079) [ 876.943766@0]- hdmitx: [0x10000103]: 0x00000008 [ 876.943770@0]- hdmitx: [0x10000104]: 0x00000001 [ 876.943773@0]- hdmitx: [0x10000170]: 0x00000010 [ 876.943774@0]- hdmitx: [0x10000180]: 0x000000ff [ 876.943776@0]- hdmitx: [0x10000181]: 0x000000ff [ 876.943778@0]- hdmitx: [0x10000182]: 0x00000003 [ 876.943779@0]- hdmitx: [0x10000183]: 0x00000007 [ 876.943781@0]- hdmitx: [0x10000184]: 0x0000003f [ 876.943782@0]- hdmitx: [0x10000185]: 0x00000002 [ 876.943784@0]- hdmitx: [0x10000187]: 0x000000ff [ 876.943786@0]- hdmitx: [0x10000188]: 0x00000003 [ 876.969392@0]- fb: osd[0] enable: 1 (kodi.bin) [ 876.990212@0]- fb: osd_update_disp_axis_hw:pan_data(0,0,1919,1079) [ 876.990213@0]- fb: osd_update_disp_axis_hw:dispdata(0,0,1919,1079) [ 877.011034@0]- fb: osd_update_disp_axis_hw:pan_data(0,0,31,31) [ 877.011036@0]- fb: osd_update_disp_axis_hw:dispdata(0,0,31,31) [ 877.031885@0]- fb: osd_update_disp_axis_hw:pan_data(0,0,31,31) [ 877.031886@0]- fb: osd_update_disp_axis_hw:dispdata(0,0,31,31) [ 877.052727@0]- vout sys: update date: 0x003c0001 [ 877.052729@0]- DOLBY: vout_notify_callback: VOUT_EVENT_MODE_CHANGE [ 877.052732@0]- vlock: event MODE_CHANGE [ 877.053694@0]- hdmitx: system: store_phy 1 [ 877.299508@1]- hdmitx: hdmitx: config: 3doff [ 877.299712@1]- vout: vmode set to null [ 877.299846@1]- fb: current vmode=1080p60hz, cmd: 0x10000 [ 877.299851@1]- vlock: event MODE_CHANGE_PRE 0 [ 877.299897@1]- hdmitx: edid: not find mapped vic [ 877.299917@1]- vout: new mode null set ok [ 877.299918@1]- fb: current vmode=null, cmd: 0x20000 [ 877.300038@1]- hdmitx: system: set frac_rate_policy as 0 [ 877.300081@1]- vout: vmode set to 1080p60hz [ 877.300128@1]- fb: current vmode=null, cmd: 0x10000 [ 877.300135@1]- hdmitx: hdmitx_set_current_vmode[5644] [ 877.300138@1]- hdmitx: system: recalc before 1080p60hz 60 1, frac 0 [ 877.300140@1]- hdmitx: system: recalc after 1080p60hz 60 1, frac 0 [ 877.300143@1]- hdmitx: system: get current mode: 1080p60hz [ 877.300145@1]- hdmitx: system: update physical size: 1600 900 [ 877.300156@1]- hdmitx: hdmitx: display colourdepth is auto set to 12 bits (VIC: 16) [ 877.300177@1]- hdmitx: video: already init VIC = 0 Now VIC = 16 [ 877.300181@1]- hdmitx: hw: div40: 0 [ 877.329776@1]- hdmitx: frac_rate = 0 [ 877.329786@1]- hdmitx: config HPLL = 4455000 frac_rate = 0 [ 877.329858@1]- hdmitx: HPLL: 0xdb0004b9 [ 877.329860@1]- hdmitx: config HPLL done [ 877.329865@1]- hdmitx: set_hpll_od3_clk_div[687] div = 10 [ 877.329869@1]- hdmitx: j = 4 vid_clk_div = 1 [ 877.329884@1]- hdmitx: set enc for VIC: 16 [ 877.371773@1]- hdmitx: hw: config hdmitx IP vic = 16 cd:6 cs: 2 [ 877.381861@1]- hdmitx: video: Sink is HDMI device [ 877.381897@1]- hdmitx: hw: set audio [ 877.381902@1]- hdmitx: hw: hdmitx tx_aud_src = 1, audio_param->channel_num = 1, hdev->aud_output_ch = 33 [ 877.381913@1]- hdmitx: fs = 2, cd = 6, tmds_clk = 148500 [ 877.381915@1]- hdmitx: hw: aud_n_para = 6272 [ 877.381923@1]- hdmitx: hw: set channel status [ 877.381978@0]h hdmitx: system: irq 80000001 0 [ 877.407761@1]- hdmitx: hw: [0x10e3] = 0x1f [ 877.407781@1]- hdmitx: audio: Audio Type: PCM [ 877.407785@1]- hdmitx: system: update rx hdr info d [ 877.407790@1]- vout: new mode 1080p60hz set ok [ 877.407793@1]- fb: current vmode=1080p60hz, cmd: 0x20000 [ 877.407801@1]- fb: osd_update_disp_axis_hw:pan_data(0,0,1919,1079) [ 877.407803@1]- fb: osd_update_disp_axis_hw:dispdata(0,0,1919,1079) [ 877.415283@0]- fb: osd_update_disp_axis_hw:pan_data(0,0,31,31) [ 877.415284@0]- fb: osd_update_disp_axis_hw:dispdata(0,0,31,31) [ 877.431948@0]- fb: osd_update_disp_axis_hw:pan_data(0,0,31,31) [ 877.431950@0]- fb: osd_update_disp_axis_hw:dispdata(0,0,31,31) [ 877.448612@0]- vout sys: update date: 0x003c0001 [ 877.448614@0]- DOLBY: vout_notify_callback: VOUT_EVENT_MODE_CHANGE [ 877.448617@0]- vlock: event MODE_CHANGE [ 877.483805@0]- hdmitx: [0x10000103]: 0x00000008 [ 877.483809@0]- hdmitx: [0x10000104]: 0x00000001 [ 877.483813@0]- hdmitx: [0x10000170]: 0x00000010 [ 877.483814@0]- hdmitx: [0x10000180]: 0x000000ff [ 877.483816@0]- hdmitx: [0x10000181]: 0x000000ff [ 877.483818@0]- hdmitx: [0x10000182]: 0x00000003 [ 877.483819@0]- hdmitx: [0x10000183]: 0x00000007 [ 877.483821@0]- hdmitx: [0x10000184]: 0x0000003f [ 877.483822@0]- hdmitx: [0x10000185]: 0x00000002 [ 877.483824@0]- hdmitx: [0x10000187]: 0x000000ff [ 877.483825@0]- hdmitx: [0x10000188]: 0x00000003 [ 916.210907@3]- asoc-aml-card auge_sound: TDM[2] Playback stop [ 916.210946@3]- audio_ddr_mngr: frddr stop success, fifo id 1, regbase:0x80, arb sts:0x40000020 [ 916.211220@3]- aml_tdm_prepare(), reset fddr [ 916.211405@2]- tdm playback mute: 0, lane_cnt = 4 [ 916.236733@0]- asoc-aml-card auge_sound: TDM[2] Playback enable [ 936.730955@0]- asoc-aml-card auge_sound: TDM[2] Playback stop [ 936.730975@0]- audio_ddr_mngr: frddr stop success, fifo id 1, regbase:0x80, arb sts:0x40000020 [ 936.731001@0]- aml_tdm_prepare(), reset fddr [ 936.731169@0]- tdm playback mute: 0, lane_cnt = 4 [ 946.731345@0]- aml_tdm_hw_setting_free(), disable mclk for tdm-2 [ 946.731378@0]- tdm playback mute: 1, lane_cnt = 4 [ 946.731484@0]- audio_ddr_mngr: frddrs[1] released by device fe330000.audiobus:i2s2hdmi [ 980.238932@2]- the vdec clock on, ref cnt: 1 [ 980.238959@2]- the clk_hevcf_mux clock on, ref cnt: 1 [ 980.238962@2]- the clk_hevcb_mux clock on, ref cnt: 1 [ 980.239159@2]- hevc mux clock is 499999992 Hz [ 980.239241@2]- hevc back mux clock is 499999992 Hz [ 980.239475@2]- vdec_create instance 000000002ec15da6, total 1, PM: pd-sec-api [ 980.239571@2]- vdec_init, dev_name:ammvdec_h265, vdec_type=VDEC_TYPE_FRAME_BLOCK id = 0 [ 980.243470@2]- decoder_bmmu_box_alloc_box, tvp_flags = 0 [ 980.243812@3]- [0]dynamic_buf_num_margin=8 [ 980.243817@3]- [0]double_write_mode=8192 [ 980.243859@3]- [0]h265:pts_unstable=0 [ 980.243863@3]- [0]h265: ver (201602101,0) decinfo: 3840x2160 rate=3203 [ 980.244229@3]- [TEE], the fw (hevc_mmu) will be loaded. [ 980.244480@3]- hevc mux clock is 799999987 Hz [ 980.244572@3]- hevc back mux clock is 799999987 Hz [ 980.244576@3]- hevc video changed to 3840 x 2160 60 fps clk->800MHZ [ 980.244646@3]- vfm map vdec-map-0 created [ 980.244671@3]- ppmgr local_init [ 980.244679@3]- dim:ch[0]:di_receiver_event_fun,8:_REG [ 980.244682@3]- dim:reg:ppmgr[13] [ 980.245425@2]- dim:reg:use[1]ms [ 980.245836@0]- ppmgr local_init [ 980.245979@0]- dim:ch[0]:di_receiver_event_fun,3:_START [ 980.246003@0]- vdec_init, vf_provider_name = vdec.h265.00, b 0 [ 980.247845@0]- vdec->port_flag=0x102, port_flag=0x103 [ 980.248223@0]- [0]vh265 cached=16384 need_size=16384 speed= 8 ms [ 980.253357@1]- [0]Bit depth luma = 10 [ 980.253366@1]- [0]Bit depth chroma = 10 [ 980.253392@1]- [0]hevc->performance_profile 0 [ 980.253396@1]- [0]set pic_list_init_flag 1 [ 980.256078@0]- [0]init_buf_spec2 3840 2160 [ 980.256085@0]- [0]set pic_list_init_flag to 2 [ 980.256130@1]- [0]set pic_list_init_flag to 3 [ 980.256133@1]- [vdec_kpi][vh265_isr_thread_fn] First I frame coming. [ 980.299561@1]- [0]VH265: output first frame [ 980.299590@1]- [vdec_kpi][post_video_frame] First I frame decoded. [ 981.417787@1]- cal_dur_from_pts vstatus 3203 dur3060 -> 3264, revised 3264 [ 981.417793@1]- wr=2,slot=2 pts 6030, 2970, 0 [ 982.137542@1]- cal_dur_from_pts vstatus 3203 dur2970 -> 3168, revised 3168 [ 982.137549@1]- wr=3,slot=3 pts 9000, 6030, 2970 [ 982.137610@1]- vframe_rate_uevent: sent uevent FRAME_RATE_HINT=3216 [ 982.145767@0]- dim:value reg:ch[0]:fix_buf:0;ponly <0,0> [ 982.145798@0]- dim:3840x2160-0x501000. [ 982.148573@0]h detect vout mode change!!!!!!!!!!!! [ 982.148595@0]h [tsync_avevent_locked 1064]VIDEO_START-tsync_mode:0(S) [ 982.148598@0]h pcr:0x0,param:0x0,vpts:0x0,apts:0xffffffff [ 988.768486@2]- vout: vmode set to null [ 988.768600@2]- fb: current vmode=1080p60hz, cmd: 0x10000 [ 988.768606@2]- vlock: event MODE_CHANGE_PRE 0 [ 988.768652@2]- hdmitx: edid: not find mapped vic [ 988.768672@2]- vout: new mode null set ok [ 988.768674@2]- fb: current vmode=null, cmd: 0x20000 [ 988.768840@2]- hdmitx: system: set frac_rate_policy as 1 [ 988.768884@2]- vout: vmode set to 2160p60hz [ 988.768940@2]- fb: current vmode=null, cmd: 0x10000 [ 988.768948@2]- hdmitx: hdmitx_set_current_vmode[5644] [ 988.768950@2]- hdmitx: system: recalc before 2160p60hz420 60 1, frac 0 [ 988.768953@2]- hdmitx: system: recalc after 2160p60hz420 2997 50, frac 1 [ 988.768955@2]- hdmitx: system: get current mode: 2160p60hz420 [ 988.768958@2]- hdmitx: system: update physical size: 1600 900 [ 988.768968@2]- hdmitx: hdmitx: display colourdepth is auto set to 12 bits (VIC: 353) [ 988.768990@2]- hdmitx: video: already init VIC = 0 Now VIC = 353 [ 988.768995@2]- hdmitx: hw: div40: 1 [ 988.801939@2]- hdmitx: frac_rate = 1 [ 988.801950@2]- hdmitx: config HPLL = 4455000 frac_rate = 1 [ 988.802027@2]- hdmitx: HPLL: 0xdb0004b9 [ 988.802028@2]- hdmitx: config HPLL done [ 988.802033@2]- hdmitx: set_hpll_od3_clk_div[687] div = 15 [ 988.802037@2]- hdmitx: j = 8 vid_clk_div = 1 [ 988.802056@2]- hdmitx: set enc for VIC: 353 [ 988.843820@2]- hdmitx: hw: config hdmitx IP vic = 353 cd:6 cs: 3 [ 988.853943@2]- hdmitx: video: Sink is HDMI device [ 988.853978@2]- hdmitx: hw: set audio [ 988.853987@2]- hdmitx: hw: hdmitx tx_aud_src = 1, audio_param->channel_num = 1, hdev->aud_output_ch = 33 [ 988.853998@2]- hdmitx: fs = 2, cd = 6, tmds_clk = 593407 [ 988.854001@2]- hdmitx: hw: aud_n_para = 6272 [ 988.854008@2]- hdmitx: hw: set channel status [ 988.883792@2]- hdmitx: hw: [0x10e3] = 0x1f [ 988.883815@2]- hdmitx: audio: Audio Type: PCM [ 988.883820@2]- hdmitx: system: update rx hdr info d [ 988.883825@2]- vout: new mode 2160p60hz set ok [ 988.883829@2]- fb: current vmode=2160p60hz420, cmd: 0x20000 [ 988.883838@2]- fb: outputmode changed to 2160p60hz420, reset osd0, (0, 0, 1919, 1079) -> (0, 0, 3839, 2159) [ 988.888046@0]- fb: osd_update_disp_axis_hw:pan_data(0,0,1919,1079) [ 988.888052@0]- fb: osd_update_disp_axis_hw:dispdata(0,0,1919,1079) [ 988.921229@0]- fb: osd[0] enable: 1 (kodi.bin) [ 988.937901@0]- fb: osd_update_disp_axis_hw:pan_data(0,1080,1919,2159) [ 988.937903@0]- fb: osd_update_disp_axis_hw:dispdata(0,0,1919,1079) [ 988.954592@0]- fb: osd_update_disp_axis_hw:pan_data(0,0,31,31) [ 988.954594@0]- fb: osd_update_disp_axis_hw:dispdata(0,0,31,31) [ 988.971284@0]- fb: osd_update_disp_axis_hw:pan_data(0,0,31,31) [ 988.971286@0]- fb: osd_update_disp_axis_hw:dispdata(0,0,31,31) [ 988.987973@0]- vout sys: update date: 0x0bb50032 [ 988.987976@0]- DOLBY: vout_notify_callback: VOUT_EVENT_MODE_CHANGE [ 988.987979@0]- vlock: event MODE_CHANGE [ 989.004519@0]h detect vout mode change!!!!!!!!!!!! [ 1005.247434@1]- vframe_rate_uevent: sent uevent FRAME_RATE_HINT=0 [ 1005.247539@0]- PPMGRVPP: info: task: quit [ 1005.247591@0]- ppmgr local_init [ 1005.247601@0]- dim:ch[0]:di_receiver_event_fun,1:_UNREG [ 1005.247616@0]- disabled amvideo on vd1 for next before free keep buffer! [ 1005.247617@0]- VID: VD1 off [ 1005.247620@0]- keep exit is skip current [ 1005.247625@0]- video_vf_unreg_provider: vd1 used: true, vd2 used: false, keep_ret:0, black_out:1, cur_dispbuf:00000000861d125e [ 1005.247630@0]d video first pts = 0 [ 1005.247631@0]- keep frame skip, disable video again. [ 1005.247633@0]- disabled amvideo on vd1 for next before free keep buffer! [ 1005.247634@0]- VID: VD1 off [ 1005.247635@0]- VD1 AFBC 0x0. [ 1005.247637@0]- pattern detected = 2, pts_enter_pattern_cnt =2, pts_exit_pattern_cnt =2 [ 1005.247683@0]- dim:unreg:2keep[0], msk:[0x0,0x0] [ 1005.258861@1]- dim:unreg:use[11]ms [ 1005.258894@1]- vdec_disable_DMC input->target= 0x1 [ 1005.259543@2]- vdec_release instance 000000002ec15da6, total 1 id = 0 [ 1005.259870@2]- the clk_hevcf_mux clock off, ref cnt: 0 [ 1005.259877@2]- the clk_hevcb_mux clock off, ref cnt: 0 [ 1005.259893@2]- the vdec clock off, ref cnt: 0 [ 1005.260172@2]- enable_fel 0 [ 1005.260216@2]- VID: VD1 off [ 1005.461024@1]- vout: vmode set to null [ 1005.461136@1]- fb: current vmode=2160p60hz420, cmd: 0x10000 [ 1005.461141@1]- vlock: event MODE_CHANGE_PRE 0 [ 1005.461194@1]- hdmitx: edid: not find mapped vic [ 1005.461214@1]- vout: new mode null set ok [ 1005.461216@1]- fb: current vmode=null, cmd: 0x20000 [ 1005.461339@1]- hdmitx: system: set frac_rate_policy as 0 [ 1005.461379@1]- vout: vmode set to 1080p60hz [ 1005.461418@1]- fb: current vmode=null, cmd: 0x10000 [ 1005.461424@1]- hdmitx: hdmitx_set_current_vmode[5644] [ 1005.461426@1]- hdmitx: system: recalc before 1080p60hz 60 1, frac 0 [ 1005.461428@1]- hdmitx: system: recalc after 1080p60hz 60 1, frac 0 [ 1005.461430@1]- hdmitx: system: get current mode: 1080p60hz [ 1005.461432@1]- hdmitx: system: update physical size: 1600 900 [ 1005.461442@1]- hdmitx: hdmitx: display colourdepth is auto set to 12 bits (VIC: 16) [ 1005.461462@1]- hdmitx: video: already init VIC = 0 Now VIC = 16 [ 1005.461466@1]- hdmitx: hw: div40: 0 [ 1005.489780@1]- hdmitx: frac_rate = 0 [ 1005.489789@1]- hdmitx: config HPLL = 4455000 frac_rate = 0 [ 1005.489863@1]- hdmitx: HPLL: 0xdb0004b9 [ 1005.489864@1]- hdmitx: config HPLL done [ 1005.489868@1]- hdmitx: set_hpll_od3_clk_div[687] div = 10 [ 1005.489873@1]- hdmitx: j = 4 vid_clk_div = 1 [ 1005.489889@1]- hdmitx: set enc for VIC: 16 [ 1005.489905@0]h hdmitx: system: irq 80000001 0 [ 1005.531790@0]- hdmitx: hw: config hdmitx IP vic = 16 cd:6 cs: 2 [ 1005.531882@0]h hdmitx: system: irq 80000001 0 [ 1005.541882@0]- hdmitx: video: Sink is HDMI device [ 1005.542021@0]- hdmitx: hw: set audio [ 1005.542027@0]- hdmitx: hw: hdmitx tx_aud_src = 1, audio_param->channel_num = 1, hdev->aud_output_ch = 33 [ 1005.542039@0]- hdmitx: fs = 2, cd = 6, tmds_clk = 148500 [ 1005.542042@0]- hdmitx: hw: aud_n_para = 6272 [ 1005.542049@0]- hdmitx: hw: set channel status [ 1005.567759@0]- hdmitx: hw: [0x10e3] = 0x1f [ 1005.567779@0]- hdmitx: audio: Audio Type: PCM [ 1005.567784@0]- hdmitx: system: update rx hdr info d [ 1005.567788@0]- vout: new mode 1080p60hz set ok [ 1005.567792@0]- fb: current vmode=1080p60hz, cmd: 0x20000 [ 1005.567798@0]- fb: outputmode changed to 1080p60hz, reset osd0, (0, 0, 3839, 2159) -> (0, 0, 1919, 1079) [ 1005.575312@0]- fb: osd_update_disp_axis_hw:pan_data(0,0,1919,1079) [ 1005.575315@0]- fb: osd_update_disp_axis_hw:dispdata(0,0,1919,1079) [ 1005.591771@1]- hdmitx: [0x10000104]: 0x00000001 [ 1005.591776@1]- hdmitx: [0x10000180]: 0x000000ff [ 1005.591778@1]- hdmitx: [0x10000181]: 0x000000ff [ 1005.591779@1]- hdmitx: [0x10000182]: 0x00000003 [ 1005.591781@1]- hdmitx: [0x10000183]: 0x00000007 [ 1005.591782@1]- hdmitx: [0x10000184]: 0x0000003f [ 1005.591784@1]- hdmitx: [0x10000185]: 0x00000002 [ 1005.591786@1]- hdmitx: [0x10000187]: 0x000000ff [ 1005.591787@1]- hdmitx: [0x10000188]: 0x00000003 [ 1005.608625@0]- fb: osd[0] enable: 1 (kodi.bin) [ 1005.625285@0]- fb: osd_update_disp_axis_hw:pan_data(0,0,1919,1079) [ 1005.625286@0]- fb: osd_update_disp_axis_hw:dispdata(0,0,1919,1079) [ 1005.641940@0]- fb: osd_update_disp_axis_hw:pan_data(0,0,31,31) [ 1005.641942@0]- fb: osd_update_disp_axis_hw:dispdata(0,0,31,31) [ 1005.658617@0]- fb: osd_update_disp_axis_hw:pan_data(0,0,31,31) [ 1005.658618@0]- fb: osd_update_disp_axis_hw:dispdata(0,0,31,31) [ 1005.675284@0]- vout sys: update date: 0x003c0001 [ 1005.675286@0]- DOLBY: vout_notify_callback: VOUT_EVENT_MODE_CHANGE [ 1005.675289@0]- vlock: event MODE_CHANGE