[ 0.000000@0] Booting Linux on physical CPU 0x0000000000 [0x412fd050] [ 0.000000@0] Linux version 5.4.210 (portisch@ubuntu) (aarch64-libreelec-linux-gnu-gcc-13.2.0 (GCC) 13.2.0, GNU ld (GNU Binutils) 2.41) #1 SMP PREEMPT Sun Jan 19 11:07:48 CET 2025 [ 0.000000@0] Machine model: Ugoos X4 [ 0.000000@0] CoreELEC dt-id: sc2_s905x4_ugoos_x4 [ 0.000000@0] earlycon: aml-uart0 at MMIO 0x00000000fe07a000 (options '') [ 0.000000@0] printk: bootconsole [aml-uart0] enabled [ 0.000000@0] 08400000 - 08500000, 1024 KB, ramoops@0x07400000 [ 0.000000@0] 05000000 - 08400000, 53248 KB, linux,secmon [ 0.000000@0] 7f000000 - 7f800000, 8192 KB, linux,meson-fb [ 0.000000@0] 70c00000 - 78c00000, 131072 KB, linux,ion-dev [ 0.000000@0] 5fc00000 - 70c00000, 278528 KB, linux,ion-fb [ 0.000000@0] invalid size property in 'linux,ppmgr' node. [ 0.000000@0] 30000000 - 5fc00000, 782336 KB, linux,codec_mm_cma [ 0.000000@0] 7f000000 - 7f000000, 0 KB, linux,codec_mm_reserved [ 0.000000@0] 7dc00000 - 7f000000, 20480 KB, linux,vdin1_cma [ 0.000000@0] failed to allocate memory for node 'linux,dsp_fw' [ 0.000000@0] cma: dma_contiguous_reserve(limit 7f800000) [ 0.000000@0] cma: dma_contiguous_reserve: reserving 8 MiB for global area [ 0.000000@0] cma: Reserved 8 MiB at 0x000000007d400000 [ 0.000000@0] On node 0 totalpages: 522240 [ 0.000000@0] DMA32 zone: 8160 pages used for memmap [ 0.000000@0] DMA32 zone: 0 pages reserved [ 0.000000@0] DMA32 zone: 522240 pages, LIFO batch:63 [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 36 pages/cpu s107352 r8192 d31912 u147456 [ 0.000000@0] pcpu-alloc: s107352 r8192 d31912 u147456 alloc=36*4096 [ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000@0] CPU features: detected: Virtualization Host Extensions [ 0.000000@0] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.000000@0] alternatives: patching kernel code [ 0.000000@0] Built 1 zonelists, mobility grouping on. Total pages: 514080 [ 0.000000@0] Kernel command line: systemd.show_status=auto init=/init console=ttyS0,921600 no_console_suspend earlycon=aml-uart,0xfe07a000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 loop.max_part=4 scramble_reg=0xfe02e030 loglevel=1 otg_device=1 logo=osd0,loaded,0x00300000 vout=576cvbs,enable panel_type=lcd_1 hdmitx=, hdmimode=1080p60hz hdmichecksum=0x00000000 dolby_vision_on=0 hdr_policy=1 hdr_priority= frac_rate_policy=0 hdmi_read_edid=1 cvbsmode=576cvbs osd_reverse=0 video_reverse=0 irq_check_en=0 androidboot.selinux=permissive androidboot.firstboot=1 jtag=disable usb3_off=0 androidboot.bootloader=01.01.241111.135841 androidboot.hardware=amlogic androidboot.serialno=X4Q2304005389 mac=9C:00:D3:56:44:67 androidboot.mac=9C:00:D3:56:44:67 androidboot.wificountrycode=US androidboot.rpmb_state=1x1 androidboot.slot_suffix=_a BOOT_IMAGE=kernel.img boot=LABEL=COREELEC disk=LABEL=STORAGE console=tty0 no_console_suspend remotewakeup=0xffffffff decode_type=0 remotewakeupmask=0xffffffff vout=1080p60hz,dis logo=osd0,loaded,0x00300000 frac_rate_policy=0 hdmitx= hdr_policy=1 hdr_priority=0 quiet androidboot.verifiedbootstate=green [ 0.000000@0] aml_media: osd0 [ 0.000000@0] aml_media: loaded [ 0.000000@0] aml_media: 0x00300000 [ 0.000000@0] vout: 576cvbs [ 0.000000@0] vout: enable: 1 [ 0.000000@0] lcd: panel_type: lcd_1 [ 0.000000@0] get hdmi checksum: 0x00000000 [ 0.000000@0] hdmitx: get hdmi checksum: 0x00000000 [ 0.000000@0] get_amdv_on: 0 [ 0.000000@0] boot hdr_policy: 1 [ 0.000000@0] hdmitx boot frac_rate_policy: 0 [ 0.000000@0] hdmitx: hdmitx boot frac_rate_policy: 0 [ 0.000000@0] vpp_axis_reverse: bootargs is 0 [ 0.000000@0] DI: di_read_canvas_reverse: bootargs is 0. [ 0.000000@0] vdin_get_video_reverse: bootargs is 0. [ 0.000000@0] uboot setup mac-addr: 9c:0:d3:56:44:67 [ 0.000000@0] **********slot_str: _a [ 0.000000@0] vout: 1080p60hz [ 0.000000@0] vout: dis: 0 [ 0.000000@0] aml_media: osd0 [ 0.000000@0] aml_media: loaded [ 0.000000@0] aml_media: 0x00300000 [ 0.000000@0] hdmitx boot frac_rate_policy: 0 [ 0.000000@0] hdmitx: hdmitx boot frac_rate_policy: 0 [ 0.000000@0] boot hdr_policy: 1 [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.000000@0] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000@0] Memory: 720568K/2088960K available (20670K kernel code, 3000K rwdata, 6496K rodata, 7232K init, 1668K bss, 86344K reserved, 1282048K cma-reserved) [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] ftrace: allocating 60469 entries in 237 pages [ 0.000000@0] rcu: Preemptible hierarchical RCU implementation. [ 0.000000@0] rcu: RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000@0] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] Tasks RCU enabled. [ 0.000000@0] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000@0] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000@0] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000@0] GIC: GICv2 detected, but range too small and irqchip.gicv2_force_probe not set [ 0.000000@0] irq_meson_gpio: 87 to 12 gpio interrupt mux initialized [ 0.000000@0] rcu: Offload RCU callbacks from CPUs: (none). [ 0.000000@0] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000360@0] Console: colour dummy device 80x25 [ 0.000366@0] printk: console [tty0] enabled [ 0.000369@0] printk: bootconsole [aml-uart0] disabled [ 0.000395@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.000401@0] pid_max: default: 32768 minimum: 301 [ 0.000481@0] LSM: Security Framework initializing [ 0.000501@0] SELinux: Initializing. [ 0.000572@0] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.000580@0] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.001802@0] ASID allocator initialised with 32768 entries [ 0.001884@0] rcu: Hierarchical SRCU implementation. [ 0.026447@0] secmon: can't fine clear_range [ 0.028564@0] smp: Bringing up secondary CPUs ... [ 0.030569@0] smp: Brought up 1 node, 4 CPUs [ 0.030574@0] SMP: Total of 4 processors activated. [ 0.030577@0] CPU features: detected: Privileged Access Never [ 0.030579@0] CPU features: detected: User Access Override [ 0.030582@0] CPU features: detected: 32-bit EL0 Support [ 0.030584@0] CPU features: detected: Common not Private translations [ 0.030586@0] CPU features: detected: RAS Extension Support [ 0.030589@0] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.030592@0] CPU features: detected: CRC32 instructions [ 0.033734@0] CPU: All CPU(s) started at EL2 [ 0.034471@0] CPU3: update max cpu_capacity 1024 [ 0.035312@3] devtmpfs: initialized [ 0.036171@0] CPU0: update max cpu_capacity 1024 [ 0.050152@3] Registered cp15_barrier emulation handler [ 0.050161@3] Registered setend emulation handler [ 0.050410@3] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.050430@3] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.050507@3] xor: measuring software checksum speed [ 0.088220@3] 8regs : 2807.000 MB/sec [ 0.128255@3] 32regs : 3419.000 MB/sec [ 0.168293@3] arm64_neon: 3081.000 MB/sec [ 0.168296@3] xor: using function: 32regs (3419.000 MB/sec) [ 0.168304@3] pinctrl core: initialized pinctrl subsystem [ 0.169216@3] NET: Registered protocol family 16 [ 0.172613@0] DMA: preallocated 256 KiB pool for atomic allocations [ 0.172636@0] audit: initializing netlink subsys (disabled) [ 0.172841@2] audit: type=2000 audit(0.172:1): state=initialized audit_enabled=0 res=1 [ 0.173246@0] cpuidle: using governor menu [ 0.175940@0] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.180031@0] pstore: Registered ramoops as persistent store backend [ 0.180042@0] ramoops: ramoops_io_en:0 1 old:0x0 ftrace_size:0x80000 [ 0.180048@0] ramoops_io_dump=0, buffer=ffffffc012847000 ftrace_old_log=0000000000000000, size=0, reboot_mode= [ 0.205106@0] audio-clocks fe330000.audio_clocks: no audio top vad clk [ 0.206867@0] audio_clocks: audio_clocks_probe done [ 0.207151@0] aml_snd_reg_map[0], reg:fe331000, size:400 [ 0.207170@0] aml_snd_reg_map[1], reg:fe330000, size:1000 [ 0.207185@0] aml_snd_reg_map[2], reg:fe331400, size:400 [ 0.207201@0] aml_snd_reg_map[3], reg:fe332000, size:1000 [ 0.207219@0] aml_snd_reg_map[4], reg:fe331800, size:400 [ 0.207234@0] aml_snd_reg_map[5], reg:fe331c00, size:104 [ 0.207250@0] aml_snd_reg_map[6], reg:fe334000, size:104 [ 0.207259@0] amlogic auge_snd_iomap probe done [ 0.212438@0] async_long_initcall = 1 [ 0.235055@0] cryptd: max_cpu_qlen set to 1000 [ 0.245657@0] iommu: Default domain type: Translated [ 0.245827@0] vgaarb: loaded [ 0.246100@0] SCSI subsystem initialized [ 0.246233@0] libata version 3.00 loaded. [ 0.246381@0] usbcore: registered new interface driver usbfs [ 0.246412@0] usbcore: registered new interface driver hub [ 0.246442@0] usbcore: registered new device driver usb [ 0.246520@0] mc: Linux media interface: v0.10 [ 0.246551@0] videodev: Linux video capture interface: v2.00 [ 0.246605@0] pps_core: LinuxPPS API ver. 1 registered [ 0.246610@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.246620@0] PTP clock support registered [ 0.247172@0] secmon: reserve_mem_size:0x3300000 [ 0.247186@0] secmon secmon: assigned reserved memory node linux,secmon [ 0.249377@0] cpu_version: chip version = 32:D - 2:1 [ 0.249771@0] Advanced Linux Sound Architecture Driver Initialized. [ 0.253478@0] clocksource: Switched to clocksource arch_sys_counter [ 0.660750@0] VFS: Disk quotas dquot_6.6.0 [ 0.660804@0] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.668394@3] thermal_sys: Registered thermal governor 'power_allocator' [ 0.669074@3] Total Memory:[7f800000] [ 0.669082@3] ramdump_probe, storage device:data [ 0.669086@3] NO valid ramdump args:0 0 [ 0.669420@3] NET: Registered protocol family 2 [ 0.669589@3] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.670470@0] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.670555@0] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.670677@0] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.670832@0] TCP: Hash tables configured (established 16384 bind 16384) [ 0.670940@0] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.670972@0] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.671093@0] NET: Registered protocol family 1 [ 0.671539@0] RPC: Registered named UNIX socket transport module. [ 0.671545@0] RPC: Registered udp transport module. [ 0.671549@0] RPC: Registered tcp transport module. [ 0.671553@0] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.671935@0] NET: Registered protocol family 44 [ 0.673035@0] PCI: CLS 0 bytes, default 64 [ 0.673229@0] aml_wifi aml_wifi: [wifi_dev_probe] use double channel [ 0.673342@0] Wifi: bcmdhd_init_wlan_mem: [dhd] STATIC-MSG) bcmdhd_init_wlan_mem : 101.10.361.10 (wlan=r892223-20210623-1) [ 0.673384@0] fbcon: Taking over console [ 0.675962@0] Wifi: bcmdhd_init_wlan_mem: [dhd] STATIC-MSG) bcmdhd_init_wlan_mem : prealloc ok: 8162304(7971K) [ 0.781835@1] Trying to unpack rootfs image as initramfs... [ 0.804720@1] Freeing initrd memory: 7308K [ 0.807987@3] hw perfevents: no interrupt-affinity property for /arm_pmu, guessing. [ 0.808220@3] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.812906@3] Initialise system trusted keyrings [ 0.813066@3] workingset: timestamp_bits=46 max_order=19 bucket_order=0 [ 0.822750@3] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.823733@3] NFS: Registering the id_resolver key type [ 0.823774@3] Key type id_resolver registered [ 0.823779@3] Key type id_legacy registered [ 0.823790@3] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.823795@3] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.824582@3] Key type cifs.idmap registered [ 0.824776@3] fuse: init (API version 7.31) [ 0.825232@3] JFS: nTxBlock = 8192, nTxLock = 65536 [ 0.831397@3] SGI XFS with security attributes, no debug enabled [ 0.833454@3] Registering sdcardfs 0.1 [ 0.862648@3] NET: Registered protocol family 38 [ 0.862667@3] Key type asymmetric registered [ 0.862673@3] Asymmetric key parser 'x509' registered [ 0.862716@3] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.862722@3] io scheduler mq-deadline registered [ 0.862727@3] io scheduler kyber registered [ 0.862924@3] io scheduler bfq registered [ 0.865704@3] Amlogic Meson SC2 (S905X4/C2) Revision 32:d (2:1) Detected [ 0.866203@3] vddcpu0: supplied by regulator-dummy [ 0.867579@1] random: crng init done [ 0.867856@0] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 0.874444@3] brd: module loaded [ 0.882997@3] loop: module loaded [ 0.883363@3] zram: Added device: zram0 [ 0.884525@3] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 0.884533@3] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld . All Rights Reserved. [ 0.885924@3] tun: Universal TUN/TAP device driver, 1.6 [ 0.886806@3] meson8b-dwmac fdc00000.ethernet: IRQ eth_wake_irq not found [ 0.886818@3] meson8b-dwmac fdc00000.ethernet: IRQ eth_lpi not found [ 0.886902@3] meson8b-dwmac fdc00000.ethernet: PTP uses main clock [ 0.886911@3] meson8b-dwmac fdc00000.ethernet: no reset control found [ 0.887375@3] meson8b-dwmac fdc00000.ethernet: User ID: 0x11, Synopsys ID: 0x37 [ 0.887387@3] meson8b-dwmac fdc00000.ethernet: DWMAC1000 [ 0.887393@3] meson8b-dwmac fdc00000.ethernet: DMA HW capability register supported [ 0.887399@3] meson8b-dwmac fdc00000.ethernet: RX Checksum Offload Engine supported [ 0.887403@3] meson8b-dwmac fdc00000.ethernet: COE Type 2 [ 0.887408@3] meson8b-dwmac fdc00000.ethernet: TX Checksum insertion supported [ 0.887412@3] meson8b-dwmac fdc00000.ethernet: Wake-Up On Lan supported [ 0.887451@3] meson8b-dwmac fdc00000.ethernet: Normal descriptors [ 0.887456@3] meson8b-dwmac fdc00000.ethernet: Ring mode enabled [ 0.887461@3] meson8b-dwmac fdc00000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 0.888045@3] aml_cust_setting [ 0.888055@3] meson8b-dwmac fdc00000.ethernet: Unable to get resource(385) [ 0.888073@3] no mac_wol [ 0.888078@3] gpio 0 [ 0.888082@3] no keep-alive [ 0.888086@3] use default internal_phy as 0 [ 0.888089@3] set default cali_val as 0 [ 0.888531@3] PPP generic driver version 2.4.2 [ 0.888707@3] PPP BSD Compression module registered [ 0.888714@3] PPP Deflate Compression module registered [ 0.888737@3] PPP MPPE Compression module registered [ 0.888741@3] NET: Registered protocol family 24 [ 0.888745@3] PPTP driver version 0.8.5 [ 0.890048@3] dwc3 fde00000.dwc3: fde00000.dwc3 supply usb1v8 not found, using dummy regulator [ 0.890198@3] dwc3 fde00000.dwc3: fde00000.dwc3 supply usb3v3 not found, using dummy regulator [ 0.890244@3] dwc3 fde00000.dwc3: fde00000.dwc3 supply usb5v not found, using dummy regulator [ 0.890955@3] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.890976@3] ehci-pci: EHCI PCI platform driver [ 0.891438@3] usbcore: registered new interface driver usb-storage [ 0.891512@3] usbcore: registered new interface driver usbserial_generic [ 0.891534@3] usbserial: USB Serial support registered for generic [ 0.892147@0] mousedev: PS/2 mouse device common for all mice [ 0.892204@0] usbcore: registered new interface driver xpad [ 0.892512@0] i2c /dev entries driver [ 0.895006@1] rtc-hym8563 3-0051: rtc information is valid [ 0.899317@3] rtc-hym8563 3-0051: registered as rtc0 [ 0.900340@3] rtc-hym8563 3-0051: setting system clock to 2025-10-22T21:27:04 UTC (1761168424) [ 0.901763@3] usbcore: registered new interface driver uvcvideo [ 0.901771@3] USB Video Class driver (1.1.1) [ 0.901939@3] meson_gxbb_wdt_set_timeout() timeout=60 [ 0.901946@3] meson_gxbb_wdt_start() [ 0.901953@3] meson-gxbb-wdt fe002100.watchdog: feeding watchdog mode: [kernel] [ 0.930262@3] meson-gx-mmc fe08c000.mmc: host probe success! [ 0.931271@3] meson-gx-mmc fe08a000.sd: Got CD GPIO [ 0.932138@3] meson-gx-mmc fe08a000.sd: Missing clock clkin2 [ 0.958884@3] meson-gx-mmc fe08a000.sd: card OUT [ 0.958914@3] meson-gx-mmc fe08a000.sd: host probe success! [ 0.959430@3] meson-gx-mmc fe088000.sdio: Missing clock clkin2 [ 0.986059@3] meson-gx-mmc fe088000.sdio: host probe success! [ 0.987394@3] ledtrig-cpu: registered to indicate activity on CPUs [ 0.987660@3] hidraw: raw HID events driver (C) Jiri Kosina [ 0.988082@1] usbcore: registered new interface driver usbhid [ 0.988088@1] usbhid: USB HID core driver [ 0.988418@3] ashmem: initialized [ 0.988892@3] meson-saradc fe026000.saradc: fe026000.saradc supply vref not found, using dummy regulator [ 0.990556@1] meson_cpufreq: choose_cpufreq_tables_index:clusterid: 0 tables_index 0 [ 0.991627@1] energy_model: Created perf domain 0-3 [ 0.991671@1] cpu cpu0: meson_cpufreq_init: CPU 0 initialized [ 0.991709@1] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1512000 KHz [ 0.992910@1] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1608000 KHz [ 0.995488@3] unifykey: fail to obtain phy addr of shared mem [ 0.997081@0] aml_dma fe440400.aml_dma: Aml dma [ 0.998209@1] aml_aes_dma fe440400.aml_dma:aml_aes: Aml AES_dma [ 0.999166@1] aml_sha_dma fe440400.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 1.000294@1] aml_tdes_dma fe440400.aml_dma:aml_tdes: Aml TDES_dma [ 1.000894@0] aml_crypto_dev fe440400.aml_dma:crypto: Aml crypto device [ 1.001592@0] meson_mhu_fifo fe006000.mhu: no get mbox wrrd -22 [ 1.001632@0] meson_mhu_fifo fe006000.mhu: no payload, only use fifo [ 1.001755@0] meson_mhu_fifo fe006000.mhu: set mbox irqmax default value -22 [ 1.002372@1] aml_mailbox: mbox sec init done [ 1.002933@1] ### media_main_init() start [ 1.002941@1] media_configs_system_init [ 1.002955@1] call media_configs_system_init() ret=0 [ 1.002968@3] Data 1 aligned delay is 0 [ 1.002975@3] mmc0: clk 199999997 div 5 tuning start [ 1.003047@1] call dmabuf_manage_init() ret=0 [ 1.003052@1] codec_mm_module_init [ 1.003229@1] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma [ 1.003264@1] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma [ 1.003268@1] codec_mm_probe ok [ 1.003370@1] call codec_mm_module_init() ret=0 [ 1.003704@1] Codec io: codec map io source 0xfe002000,size=8192 to 0xffffffc013162000 [ 1.003729@1] Codec io: codec map io source 0xfe320000,size=65536 to 0xffffffc013320000 [ 1.003753@1] Codec io: codec map io source 0xff000000,size=262144 to 0xffffffc013340000 [ 1.003768@1] Codec io: codec map io source 0xfe036000,size=8192 to 0xffffffc0131f6000 [ 1.003782@1] Codec io: codec_io_probe success, cpu_type=0x32 [ 1.004004@1] call codec_io_init() ret=0 [ 1.004011@1] call vdec_reg_ops_init() ret=0 [ 1.004262@1] vpu: vpu: driver version: v20230103(7-sc2) [ 1.004283@1] vpu: vpu: load vpu_clk: 666666667Hz(7) [ 1.004361@1] vpu: vpu: vpu_probe OK [ 1.004530@1] call vpu_init() ret=0 [ 1.004627@1] vclk: aml_vclk_probe OK [ 1.004694@1] call aml_vclk_init_module() ret=0 [ 1.004826@1] call vrr_init() ret=0 [ 1.004959@1] Canvas: canvas_probe ok, reg=fe036048, size=2000 base =ffffffc013318048 [ 1.005021@1] call amcanvas_init() ret=0 [ 1.005181@1] rdma: line_n_rdma_en = 0 [ 1.005186@1] rdma: rdma_probe,cpu_type:4, ver:1, len:16,rdma_table_size:65536 [ 1.005517@3] mmc0: adj_win: < 0 1 2 4 > [ 1.005524@3] mmc0: adj_win: < 0 1 2 4 > [ 1.005531@1] rdma: rdma_register, rdma_table_addr ffffffc01339b000 phy: 7d4b0000 reg_buf ffffff802f5f0000 [ 1.005537@1] rdma: rdma_register success, handle 1 table_size 65536 [ 1.005540@3] step:4, delay1:0x4104104, delay2:0x4004104 [ 1.005544@1] rdma: set_rdma_handle video rdma handle = 1. [ 1.005621@1] rdma: rdma_register, rdma_table_addr ffffffc0133ac000 phy: 7d4c0000 reg_buf ffffff802f190000 [ 1.005625@1] rdma: rdma_register success, handle 2 table_size 65536 [ 1.005628@1] rdma: set_rdma_handle video rdma handle = 2. [ 1.005713@1] rdma: rdma_register, rdma_table_addr ffffffc013331000 phy: 7d468000 reg_buf ffffff802f1b0000 [ 1.005717@1] rdma: rdma_register success, handle 3 table_size 32768 [ 1.005720@1] rdma: set_rdma_handle video rdma handle = 3. [ 1.005968@1] call amrdma_init() ret=0 [ 1.006247@1] call vout_mux_init() ret=0 [ 1.006251@1] call dsc_init() ret=0 [ 1.006378@1] call amhdmitx21_init() ret=0 [ 1.006664@1] hdmitx: system: Ver: 20210902 [ 1.006695@1] hdmitx: system: no hdmitx_i2c of pinctrl state [ 1.006724@1] hdmitx: system: not find match pwr-ctl [ 1.006844@1] hdmitx: get cts_hdmi_axi_clk err [ 1.007230@1] vpu: vpu: vpu_dev_register: vpu_dev 37 in amhdmitx is already registered [ 1.007988@3] mmc0: adj_win: < 0 1 2 4 > [ 1.007995@3] step:8, delay1:0x8208208, delay2:0x8008208 [ 1.010414@3] mmc0: adj_win: < 0 1 2 4 > [ 1.010420@3] step:12, delay1:0xc30c30c, delay2:0xc00c30c [ 1.012816@3] mmc0: adj_win: < 0 1 2 3 > [ 1.012822@3] tuning-c:2, tuning-s:4 [ 1.012827@3] step:16, delay1:0x10410410, delay2:0x10010410 [ 1.012833@3] mmc0: clk= 0x10000205, adj = 0x22000, dly1 = 10410410, dly2 = 10010410 [ 1.014071@3] aml_sd_emmc_clktest [531] clktest : 8700, delay_cell: 75, count: 33 [ 1.014079@3] [tl1_emmc_line_timing], delay1: 0xc30c30c, delay2: 0xc30c [ 1.055579@3] scan time distance: 41490708 ns [ 1.055588@3] cmd-best-c:22, cmd-best-size:27 [ 1.120716@3] ds_sht: 17, window:29, intf3:0x411008, clock:0x10160002 [ 1.120720@3] adjust:0x0 [ 1.120848@3] mmc0: new HS400 MMC card at address 0001 [ 1.120852@3] mmc0: clock 199999997, 8-bit-bus-width [ 1.120852@3] [ 1.121504@3] mmcblk0: mmc0:0001 AJTD4R 14.6 GiB [ 1.121792@3] mmcblk0boot0: mmc0:0001 AJTD4R partition 1 4.00 MiB [ 1.122105@3] mmcblk0boot1: mmc0:0001 AJTD4R partition 2 4.00 MiB [ 1.122323@3] mmcblk0rpmb: mmc0:0001 AJTD4R partition 3 4.00 MiB, chardev (242:0) [ 1.124167@3] Enter aml_emmc_partition_ops [ 1.124481@3] [mmc_read_partition_tbl] mmc read partition OK! [ 1.124486@3] add_emmc_partition [ 1.124612@3] [mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000 [ 1.124691@3] [mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000 [ 1.124771@3] [mmcblk0p03] cache offset 0x000006c00000, size 0x000000000000 [ 1.124853@3] [mmcblk0p04] env offset 0x000007400000, size 0x000000800000 [ 1.124924@3] [mmcblk0p05] frp offset 0x000008400000, size 0x000000200000 [ 1.125000@3] [mmcblk0p06] factory offset 0x000008e00000, size 0x000000800000 [ 1.125076@3] [mmcblk0p07] vendor_boot_a offset 0x000009e00000, size 0x000001800000 [ 1.125158@3] [mmcblk0p08] vendor_boot_b offset 0x00000be00000, size 0x000001800000 [ 1.125233@3] [mmcblk0p09] tee offset 0x00000de00000, size 0x000002000000 [ 1.125308@3] [mmcblk0p10] logo offset 0x000010600000, size 0x000000800000 [ 1.125381@3] [mmcblk0p11] misc offset 0x000011600000, size 0x000000200000 [ 1.125457@3] [mmcblk0p12] dtbo_a offset 0x000012000000, size 0x000000200000 [ 1.125568@3] [mmcblk0p13] dtbo_b offset 0x000012a00000, size 0x000000200000 [ 1.125660@3] [mmcblk0p14] cri_data offset 0x000013400000, size 0x000000800000 [ 1.125756@3] [mmcblk0p15] param offset 0x000014400000, size 0x000001000000 [ 1.125836@3] [mmcblk0p16] oem_a offset 0x000015c00000, size 0x000002000000 [ 1.125911@3] [mmcblk0p17] oem_b offset 0x000018400000, size 0x000002000000 [ 1.125991@3] [mmcblk0p18] boot_a offset 0x00001ac00000, size 0x000004000000 [ 1.126068@3] [mmcblk0p19] boot_b offset 0x00001f400000, size 0x000004000000 [ 1.126145@3] [mmcblk0p20] rsv offset 0x000023c00000, size 0x000001000000 [ 1.126220@3] [mmcblk0p21] metadata offset 0x000025400000, size 0x000001000000 [ 1.126297@3] [mmcblk0p22] vbmeta_a offset 0x000026c00000, size 0x000000200000 [ 1.126376@3] [mmcblk0p23] vbmeta_b offset 0x000027600000, size 0x000000200000 [ 1.126455@3] [mmcblk0p24] vbmeta_system_a offset 0x000028000000, size 0x000000200000 [ 1.126531@3] [mmcblk0p25] vbmeta_system_b offset 0x000028a00000, size 0x000000200000 [ 1.126607@3] [mmcblk0p26] super offset 0x000029400000, size 0x000080000000 [ 1.126682@3] [mmcblk0p27] userdata offset 0x0000a9c00000, size 0x0002fa200000 [ 1.126701@3] card key: card_blk_probe. [ 1.126707@3] emmc_key_init:499 emmc key lba_start:0x12020,lba_end:0x12422 [ 1.128561@3] calc 14000d7a3b, store 14000d7a3b [ 1.130211@3] calc 14000d7a3b, store 14000d7a3b [ 1.130216@3] do nothing [ 1.130229@3] emmc key: emmc_key_init:532 ok. [ 1.130233@3] amlmmc_dtb_init: register dtb chardev [ 1.131866@3] calc 3e530f8c, store 3e530f8c [ 1.133446@3] calc 3e530f8c, store 3e530f8c [ 1.133450@3] total valid 2 [ 1.133596@3] amlmmc_dtb_init: register dtb chardev OK [ 1.133621@3] Exit aml_emmc_partition_ops OK. [ 1.135972@1] hdmitx: edid: EDID Parser: [ 1.135990@1] [RX]-up_phy_addr = 1 [ 1.135997@1] hdmitx: Edid_ParsingVendSpec:ieeeoui=0xd046,len=11 [ 1.136002@1] hdmitx: v2 VSVDB: len=11, sup_2160p60hz=1, Interface=3 [ 1.136005@1] hdmitx: Edid_ParsingVendSpec:ieeeoui=0xd046,len=11 [ 1.136008@1] hdmitx: v2 VSVDB: len=11, sup_2160p60hz=1, Interface=3 [ 1.136028@1] hdmitx: edid: get dtd0 vic: 97 [ 1.136032@1] hdmitx: edid: get dtd1 vic: 16 [ 1.136036@1] hdmitx: edid: change preferred_mode from 97 to 96 [ 1.136039@1] hdmitx: hdmitx: get PMT vic: 97 [ 1.136043@1] hdmitx: edid: find IEEEOUT [ 1.136047@1] hdmitx: edid: check sum valid [ 1.136050@1] hdmitx: edid: check sum valid [ 1.136058@1] hdmitx: edid: check sum valid [ 1.136061@1] hdmitx: edid: check sum valid [ 1.136067@1] hdmitx: edid: blk0 raw data [ 1.136088@1] hdmitx: edid: [ 1.136088@1] 00ffffffffffff0034a996a20000000000230103805e36780af061a952409f24 [ 1.136088@1] 0d5054afef80b3009500a9409040810081808140010108e80030f2705a80b058 [ 1.136088@1] 8a00501d7400001e023a801871382d40582c4500501d7400001e000000fc0050 [ 1.136088@1] 616e61736f6e69632d54560a000000fd00303e0f463c000a20202020202001f1 [ 1.136088@1] [ 1.136088@1] [ 1.136091@1] hdmitx: edid: blk1 raw data [ 1.136111@1] hdmitx: edid: [ 1.136111@1] 02035af05160611f10041305140301122021225d5e5f2c097f07150750570701 [ 1.136111@1] 670407830100006d030c001000b84420006003020167d85dc40178800be200cf [ 1.136111@1] e50f03000000e3060f01e305e301eb0146d0004d9e4ba4322fbf000000000000 [ 1.136111@1] 0000000000000000000000000000000000000000000000000000000000000056 [ 1.136111@1] [ 1.136111@1] [ 1.136118@1] hdmitx: hdmitx: get vic 0 cscd [ 1.136130@1] hdmitx: hdmitx: mode name invalid [ 1.136147@1] hdmitx: hdmitx: tmds clock 0 [ 1.136150@1] hdmitx: hdmitx: act clock: 0 [ 1.136163@0] hdmitx: system: irq 2 0 [ 1.136182@0] hdmitx: UTC+0 2025-10-22 21:27:04 HPD HIGH [ 1.136812@1] hdmitx: system: amhdmitx_probe end [ 1.137028@1] call amhdmitx_init() ret=0 [ 1.137352@1] aml_vdac_config_probe: cpu_id:4, name:meson-sc2-vdac [ 1.137356@1] not get cdac_disable. [ 1.137729@1] aml_vdac_probe: ok [ 1.137890@1] call aml_vdac_init() ret=0 [ 1.138207@1] aml_media: register cvbs module server ok [ 1.138212@1] aml_media: register cvbs module vout2 server ok [ 1.138763@1] call cvbs_init_module() ret=0 [ 1.139022@1] call lcd_init() ret=0 [ 1.139026@1] call peripheral_lcd_init() ret=0 [ 1.139375@1] call esm_init() ret=0 [ 1.139537@1] vpu_security_probe ok. [ 1.139604@1] call vpu_security_init() ret=0 [ 1.140034@1] aml_media: unable to register osd driver, r=0xffffffed [ 1.140049@1] call osd_init_module() ret=-19 [ 1.140231@1] call dummy_venc_init() ret=0 [ 1.140308@1] call vout_sys_serve_init() ret=0 [ 1.140377@1] vout: fr_policy:2 [ 1.140381@1] vout: error: aml_vout_get_dt_info: can't get vsync irq [ 1.140793@1] hdmitx: hdmitx_set_current_vmode[6094] [ 1.140799@1] hdmitx: system: recalc before 1080p60hz 60 1, frac 0 [ 1.140803@1] hdmitx: system: recalc after 1080p60hz 60 1, frac 0 [ 1.140807@1] hdmitx: system: get current mode: 1080p60hz [ 1.140811@1] hdmitx: system: update physical size: 940 540 [ 1.140827@1] hdmitx: hdmitx: display colourdepth is auto set to 12 bits (VIC: 16) [ 1.140846@1] hdmitx: video: already init VIC = 0 Now VIC = 16 [ 1.141872@1] hdmitx: hw: div40: 0 [ 1.171491@1] hdmitx: frac_rate = 0 [ 1.171499@1] hdmitx: config HPLL = 4455000 frac_rate = 0 [ 1.171575@1] hdmitx: HPLL: 0xdb0004b9 [ 1.171578@1] hdmitx: config HPLL done [ 1.171585@1] hdmitx: set_hpll_od3_clk_div[467] div = 10 [ 1.171592@1] hdmitx: j = 4 vid_clk_div = 1 [ 1.171672@1] hdmitx: set enc for VIC: 16 [ 1.171687@1] hdmitx: hw: config hdmitx IP vic = 16 cd:6 cs: 2 [ 1.184824@1] hdmitx: adjust decouple fifo [ 1.221482@1] hdmitx: video: Sink is HDMI device [ 1.221520@1] hdmitx: hw: set audio [ 1.221535@1] hdmitx: fs = 3, cd = 6, tmds_clk = 148500 [ 1.221540@1] hdmitx: hw: aud_n_para = 6144 [ 1.221549@1] hdmitx: hw: set channel status [ 1.221564@1] hdmitx: hw: [0x10e3] = 0x1f [ 1.221595@1] hdmitx: audio: Audio Type: PCM [ 1.221604@1] vout: init mode 1080p60hz set ok [ 1.221607@1] vout: aml_vout_probe OK [ 1.221704@1] call vout_init_module() ret=0 [ 1.222312@1] call gp_pll_init() ret=0 [ 1.222529@1] ion_dev: __meson_ion_add_heap,heap->name=ion-dev heap->id=8 [ 1.222549@1] ion_dev: __meson_ion_add_heap,heap->name=ion-fb heap->id=9 [ 1.222937@3] ion_dev: __meson_ion_add_heap,heap->name=codec_mm_cma heap->id=16 [ 1.223134@3] call ion_init() ret=0 [ 1.223404@3] call mua_init() ret=0 [ 1.223513@3] call vfm_class_init() ret=0 [ 1.224125@3] aml_media: ge2d init clock is 500000000 HZ, VPU clock is 666666656 HZ [ 1.224219@3] aml_media: ge2d clock is 499 MHZ [ 1.224246@3] aml_media: map io source 0x0000000082efc3eb,size=256 to 0x000000001b8ddb6c [ 1.224250@3] aml_media: reserved mem is not used [ 1.224506@3] call ge2d_init_module() ret=0 [ 1.224510@3] vicp_init_module [ 1.224633@2] aml_media: ge2d workqueue monitor start [ 1.224638@3] call vicp_init_module() ret=0 [ 1.226018@3] call configs_init_devices() ret=0 [ 1.226302@3] call lut_dma_init() ret=0 [ 1.226524@3] amvideom_probe, cpu_type=3 [ 1.226569@3] secure_register module=1 ok [ 1.226593@3] amvideom vsync irq: 52 [ 1.226600@3] amvideom meson-amvideom: IRQ vsync_viu2 not found [ 1.226615@3] cannot get amvideom viu2 irq resource [ 1.226668@3] create_ge2d_work_queue video task ok [ 1.226984@3] create amvideo_poll attribute (null) fail [ 1.227133@3] create_video_receiver video_render.0 00000000b735af21, path_id:2 success [ 1.227141@3] create_video_receiver video_render.1 00000000c269f6a7, path_id:3 success [ 1.227147@3] create_video_receiver video_render.2 000000008a77b536, path_id:5 success [ 1.227153@3] create_video_receiver video_render.5 00000000b37e9957, path_id:8 success [ 1.227159@3] create_video_receiver video_render.6 00000000450dbb30, path_id:9 success [ 1.227177@3] request irq fail, -22 [ 1.227224@3] call video_init() ret=0 [ 1.227257@3] call aml_lcd_extern_i2c_dev_init() ret=0 [ 1.227275@3] call aml_bl_extern_i2c_init() ret=0 [ 1.227403@3] call aml_lcd_extern_init() ret=0 [ 1.227674@3] call aml_bl_init() ret=0 [ 1.227752@3] call aml_bl_extern_init() ret=0 [ 1.227828@3] call ldim_dev_init() ret=0 [ 1.227904@3] call vout2_init_module() ret=0 [ 1.227979@3] call vout3_init_module() ret=0 [ 1.228076@3] PPMGRDRV: info: ppmgr_dev major:504 [ 1.228076@3] [ 1.228203@3] ppmgr driver probe: irq:0 [ 1.228215@3] ppmgr: probe of ppmgr failed with error -22 [ 1.228238@3] call ppmgr_init_module() ret=0 [ 1.228335@3] videosync_create_instance dev_s 000000001c72ffdd,dev_s->dev 00000000a5bc0991 [ 1.228339@3] videosync create instance reg videosync.0 [ 1.228433@3] call videosync_init() ret=0 [ 1.228438@1] videosync thread started [ 1.228544@3] aml_media: picdec_driver_probe called. [ 1.228549@3] aml_media: picdec_driver_probe reserved_mem is not used. [ 1.228977@3] call picdec_init_module() ret=0 [ 1.228981@3] amdolby_vision_init:module init [ 1.229253@3] [ 1.229253@3] amdolby_vision probe start & ver: 2023000423 [ 1.229262@3] Can't find multi_core1. [ 1.229265@3] [ 1.229265@3] cpu_id=5 tvmode=0, enable multi_core1 0 [ 1.229648@3] amdv_init_receiver(dvel) [ 1.229653@3] amdv_init_receiver: dvel [ 1.230073@3] get dma_vaddr 00000000e88f485c [ 1.230358@3] amdolby_vision_probe: ok [ 1.230368@3] dovi disable in uboot [ 1.230515@3] call amdolby_vision_init() ret=0 [ 1.230709@3] new arch is :1. [ 1.230713@3] call tsync_module_init() ret=0 [ 1.230760@3] [tsync_pcr_init]init success. [ 1.230764@3] call tsync_pcr_init() ret=0 [ 1.230767@3] video_composer_module_init_1 [ 1.231076@3] video_composer_probe:ports[i].name=video_composer.0, i=0 [ 1.231158@3] video_composer_probe:ports[i].name=video_composer.1, i=1 [ 1.231225@3] video_composer_probe num=2 [ 1.231313@3] call video_composer_module_init() ret=0 [ 1.231316@3] call meson_videotunnel_init() ret=0 [ 1.231319@3] vdetect_init [ 1.231438@3] call vdetect_init() ret=0 [ 1.231442@3] call videoqueue_init() ret=0 [ 1.231445@3] aml_vecm_init:module init [ 1.231690@3] [ 1.231690@3] VECM probe start [ 1.231807@3] hdr dma_vaddr: ffffffc0134b6000 [ 1.232005@3] Can't find lut3d_en. [ 1.232009@3] Can't find ct_3dlut. [ 1.232019@3] vecm chip id: 0, chip_cls : 0 [ 1.232052@3] ID:0x0 map phy: 0xff000000 0x0000000063ce192f [ 1.232059@3] ID:0x1 map phy: 0xff63c000 0x00000000b8dce824 [ 1.232063@3] ID:0x2 map phy: 0x0 0x0000000000000000 [ 1.232067@3] Codec io: No support bus type 2 to write. [ 1.232077@3] Codec io: write cbus reg f2 error -1 [ 1.232089@3] vlock clk not cfg [ 1.232098@3] Codec io: No support bus type 2 to read. [ 1.232105@3] Codec io: read cbus reg 20 error -1 [ 1.232113@3] Codec io: No support bus type 2 to read. [ 1.232120@3] Codec io: read cbus reg 21 error -1 [ 1.232129@3] vlock: enc org Line addr:0x1cbb org_enc_line_num val: 524 [ 1.232132@3] vlock: enc org Pixel addr:0x1cb0 val: 1715 [ 1.241477@3] Codec io: No support bus type 2 to read. [ 1.241487@3] Codec io: read cbus reg d1 error -1 [ 1.241494@3] Codec io: No support bus type 2 to write. [ 1.241501@3] Codec io: write cbus reg d1 error -1 [ 1.241508@3] Codec io: No support bus type 2 to read. [ 1.241515@3] Codec io: read cbus reg d1 error -1 [ 1.241521@3] Codec io: No support bus type 2 to write. [ 1.241528@3] Codec io: write cbus reg d1 error -1 [ 1.241540@3] vlock_status_init vlock_en:0 [ 1.241543@3] vlock_status_init vlock_en:0 adj_type:4 mode:0 [ 1.242126@3] aml_vecm_probe: ok [ 1.242226@3] call aml_vecm_init() ret=0 [ 1.242619@3] ionvideo-000: V4L2 device registered as video13 [ 1.243190@3] ionvideo-008: V4L2 device registered as video21 [ 1.243320@3] call ionvideo_init() ret=0 [ 1.243490@3] v4lvideo-000: V4L2 device registered as video30 [ 1.244065@3] v4lvideo-008: V4L2 device registered as video38 [ 1.244070@3] call v4lvideo_init() ret=0 [ 1.244074@3] amlvid:info: amlvideo_init called [ 1.244077@3] amlvid:info: amlvideo_create_instance called [ 1.244077@3] [ 1.244155@3] amlvideo-000: V4L2 device registered as video10 [ 1.244158@3] amlvid:info: amlvideo_create_instance called [ 1.244158@3] [ 1.244164@3] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 1.244164@3] [ 1.244233@3] amlvideo-001: V4L2 device registered as video23 [ 1.244236@3] call amlvideo_init() ret=0 [ 1.244468@3] no match support_4k for amlvideo2.0, disable as default [ 1.244648@3] no match support_4k for amlvideo2.1, disable as default [ 1.244767@3] amlvideo2: V4L2 device registered as video12 [ 1.244825@3] call amlvideo2_init() ret=0 [ 1.244829@3] dil:dil_init. [ 1.245032@3] dil:dil_init ok. [ 1.245036@3] call dil_init() ret=0 [ 1.245039@3] DI: di_module_init ok. [ 1.245142@3] call di_module_init() ret=0 [ 1.245146@3] dim:dim_module_init [ 1.246550@3] dim:name: dim_sc2:id[37]:ver[1] [ 1.246597@3] di_multi multi-di: IRQ aisr_irq not found [ 1.247069@3] dim:afbc_prob:ok:en_ponly_afbcd[0] [ 1.247089@3] dim:cvs inp:0xd9~0xda~0xdb. [ 1.247189@3] dim:hw_init_v3: [ 1.247194@3] dim: 0x17c5:0x1 [ 1.247198@3] dim: 0x17c6:0x1 [ 1.247201@3] dim: 0x1730:0xc3fe0000 [ 1.247233@3] dim:dct_pre_prob:not support [ 1.247367@3] dim:dim_tb_prob:end=0 [ 1.247371@3] . [ 1.247543@3] . [ 1.247665@3] dim:dim_probe:ok [ 1.247792@3] dim:dim_module_init finish [ 1.247796@3] call dim_module_init() ret=0 [ 1.247799@3] di_v4l_init init [ 1.247914@3] di_v4l_init reserved mem is not used. [ 1.247932@3] di_v4l_init out [ 1.247935@3] call di_v4l_init() ret=0 [ 1.248631@3] input: cec_input as /devices/virtual/input/input0 [ 1.248712@3] cec: using cec:1 [ 1.248744@3] cec: not find 'arc_port_mask' [ 1.248920@3] cec: 2 irq src, a:54, b:53 [ 1.250339@3] cec: wakeup_reason:0x0 [ 1.251925@0] check_video_pattern_output: VD0 TESTPATTERN OFF [ 1.251931@0] check_video_pattern_output: VD1 TESTPATTERN OFF [ 1.251935@0] check_video_pattern_output: VD2 TESTPATTERN OFF [ 1.251939@0] check_postblend_pattern_output: VPP TESTPATTERN OFF [ 1.290581@3] cec: wakeup_data: 0x0 0x0 [ 1.290624@3] cec: aml_cec_probe success end [ 1.290908@3] call cec_init() ret=0 [ 1.291287@3] call gdc_driver_init() ret=0 [ 1.291536@3] call adc_init() ret=0 [ 1.291722@3] call tvafe_drv_init() ret=0 [ 1.291804@3] call vbi_init() ret=0 [ 1.291986@3] call tvafe_avin_detect_init() ret=0 [ 1.292154@3] call amvdec_656in_init_module() ret=0 [ 1.292166@3] vdin_drv_init: major 498 ver:20230112 [ 1.292470@3] vdin_drv_init: vdin driver init done [ 1.292474@3] call vdin_drv_init() ret=0 [ 1.292784@3] [RX]-hdmirx_init [ 1.292788@3] call hdmirx_init() ret=0 [ 1.292791@3] ESM HLD: Initializing... [ 1.293183@3] call hld_init() ret=0 [ 1.293188@3] [viuin..]viuin_init_module viuin module init [ 1.293432@3] [viuin..]viuin_probe probe ok. [ 1.293458@3] [viuin..]viuin_init_module done [ 1.293488@3] call viuin_init_module() ret=0 [ 1.293491@3] call resman_init() ret=0 [ 1.293494@3] call aml_atvdemod_init() ret=0 [ 1.293814@3] dtv_dmd:[amldtvdemod..]aml_dtvdemod_init. [ 1.293818@3] call aml_dtvdemod_init() ret=0 [ 1.293821@3] call minfo_init() ret=0 [ 1.293823@3] call msync_init() ret=0 [ 1.293826@3] frc: frc_init:module init [ 1.293911@3] call frc_init() ret=0 [ 1.293914@3] call amlogic_system_secure_dma_buf_init() ret=0 [ 1.293918@3] vpp_drv:vpp_drv_init module init [ 1.294018@3] call vpp_drv_init() ret=0 [ 1.294021@3] call amprime_sl_init() ret=0 [ 1.294024@3] ### media_main_init() end [ 1.294174@3] amvideocap_probe,amvideocap [ 1.294192@3] use cma buf. [ 1.295134@3] Enable disable_nonboot_cpus in syscore shutdown. [ 1.295439@3] hifi4dsp: hifi4dsp_platform_probe of read dsp-cnt=1 [ 1.295444@3] hifi4dsp: hifi4dsp_platform_probe of read dsp_start_mode = 1 [ 1.295448@3] hifi4dsp: hifi4dsp_platform_probe of read dspaoffset=0x00000000 [ 1.295453@3] hifi4dsp: hifi4dsp_platform_probe of read dspboffset=0x00800000 [ 1.295457@3] hifi4dsp: hifi4dsp_platform_probe of read dsp bootlocation=1 [ 1.295460@3] hifi4dsp: Dsp boot from DDR ! [ 1.295482@3] hifi4dsp: reserved memory init fail:-22 [ 1.295530@3] hifi4dsp: probe of fe340000.hifi4dsp failed with error -12 [ 1.295914@3] aml_aucpu aucpu: Direct firmware load for aucpu_fw.bin failed with error -2 [ 1.295922@3] load aucpu_fw.bin fail [ 1.295925@3] load start_aucpu_fw fail [ 1.296209@3] aml_dvb_extern_init: OK, version: V1.12. [ 1.296532@3] [drm] [am_meson_vpu_probe] in [ 1.296536@3] [drm] [am_meson_vpu_probe] out [ 1.296713@3] [drm] [am_meson_drv_probe] in [ 1.296799@3] [drm] [am_meson_drv_probe] out [ 1.296936@3] [drm] [am_meson_vpu_bind] in [ 1.296959@3] [drm] id=0,index=0,num_in_links=0,num_out_links=1 [ 1.296962@3] [drm] in_mask=0x0,out_mask=0x10 [ 1.296970@3] [drm] id=1,index=1,num_in_links=0,num_out_links=1 [ 1.296973@3] [drm] in_mask=0x0,out_mask=0x20 [ 1.296979@3] [drm] id=2,index=2,num_in_links=0,num_out_links=1 [ 1.296982@3] [drm] in_mask=0x0,out_mask=0x40 [ 1.296989@3] [drm] id=4,index=0,num_in_links=1,num_out_links=1 [ 1.296992@3] [drm] in_mask=0x1,out_mask=0x800 [ 1.296998@3] [drm] id=5,index=1,num_in_links=1,num_out_links=1 [ 1.297001@3] [drm] in_mask=0x2,out_mask=0x100 [ 1.297007@3] [drm] id=6,index=2,num_in_links=1,num_out_links=1 [ 1.297010@3] [drm] in_mask=0x4,out_mask=0x200 [ 1.297016@3] [drm] id=7,index=0,num_in_links=1,num_out_links=1 [ 1.297019@3] [drm] in_mask=0x1000,out_mask=0x4000 [ 1.297025@3] [drm] id=8,index=1,num_in_links=1,num_out_links=1 [ 1.297028@3] [drm] in_mask=0x20,out_mask=0x800 [ 1.297036@3] [drm] id=9,index=2,num_in_links=1,num_out_links=1 [ 1.297039@3] [drm] in_mask=0x40,out_mask=0x800 [ 1.297046@3] [drm] id=11,index=0,num_in_links=3,num_out_links=2 [ 1.297049@3] [drm] in_mask=0x310,out_mask=0x5000 [ 1.297055@3] [drm] id=12,index=0,num_in_links=1,num_out_links=1 [ 1.297058@3] [drm] in_mask=0x800,out_mask=0x80 [ 1.297064@3] [drm] id=14,index=0,num_in_links=2,num_out_links=0 [ 1.297067@3] [drm] in_mask=0x880,out_mask=0x0 [ 1.297074@3] [drm] id=17,index=0,num_in_links=0,num_out_links=0 [ 1.297076@3] [drm] in_mask=0x0,out_mask=0x0 [ 1.297091@3] [drm] id=18,index=1,num_in_links=0,num_out_links=0 [ 1.297094@3] [drm] in_mask=0x0,out_mask=0x0 [ 1.297110@3] [drm] undefined crtcmask_of_osd! [ 1.297114@3] [drm] undefined crtcmask_of_video! [ 1.297117@3] [drm] undefined overwrite_crtcmask_of_osd! [ 1.297120@3] [drm] undefined overwrite_crtcmask_of_video! [ 1.297150@3] [drm] osd plane 0 create done, occupied-0 crtc_mask-0 type-1 [ 1.297176@3] [drm] osd plane 1 create done, occupied-0 crtc_mask-0 type-0 [ 1.297194@3] [drm] osd plane 2 create done, occupied-0 crtc_mask-0 type-0 [ 1.297197@3] [drm] create 3 osd plane done [ 1.297201@3] [drm] vfm_mode=1 [ 1.297211@3] [drm] video plane 0 create done [ 1.297218@3] [drm] video plane 1 create done [ 1.297220@3] [drm] create 2 video plane done [ 1.297224@3] [drm] meson_crtc_bind [ 1.297256@3] rdma: rdma_register, rdma_table_addr ffffffc0134ba000 phy: 2dd1d000 reg_buf ffffff802dd1e000 [ 1.297260@3] rdma: rdma_register success, handle 4 table_size 4096 [ 1.297264@3] [drm] meson_vpu_reg_handle_register, vpp0-4 [ 1.297402@3] [drm] [am_meson_vpu_bind] out [ 1.297418@3] meson drm-subsystem: bound ff900000.drm-vpu (ops _etext) [ 1.297424@3] [drm] [meson_hdmitx_dev_bind] in [ 1.297428@3] hdmitx: get_hdmitx_hdcp_ctl_lvl_to_drm hdmitx20_0 [ 1.297431@3] [drm] hdcp_ctl_lvl=0 [ 1.297515@3] [drm] meson_hdmitx_dev_bind[2134] [ 1.297520@3] [drm] [meson_hdmitx_dev_bind] out [ 1.297524@3] hdmitx: meson_hdmitx_bind hdmi [0] [ 1.297530@3] meson drm-subsystem: bound 0.amhdmitx (ops _etext) [ 1.297572@3] [drm] am_drm_writeback creat ok [ 1.297575@3] [drm] mode_config crtc number:1 [ 1.297711@3] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.297715@3] [drm] Driver supports precise vblank timestamp query. [ 1.297733@3] [drm] logo_skip = 0 [ 1.297737@3] [drm] am_meson_logo_init [ 1.297748@3] meson drm-subsystem: assigned reserved memory node linux,meson-fb [ 1.297753@3] [drm] of read reserve memsize=0x800000 [ 1.298293@3] [drm] ------ NO reserved dma [ 1.298306@3] [drm] meson_fb[id:98,ref:1]=0x0000000027f1ae5d,meson_fb->bufp[0]=0x0000000000000000 [ 1.298309@3] [drm] am_meson_load_logo idx[0] [ 1.298315@3] [drm] logo0 width=1920,height=1080,start_addr=0x0x000000007f000000,size=8388608 [ 1.298318@3] [drm] bpp=16,alloc_flag=1, osd_reverse=0 [ 1.298321@3] [drm] outputmode=1080p60hz [ 1.298775@3] [drm] Found connector[11] mode[1080p60hz] [ 1.298779@3] [drm] mode private flag 0 [ 1.298792@3] [drm] uboot_mode_init=0 [ 1.298824@3] [drm:meson_hdmitx_atomic_check] *ERROR* hdmitx_on changed, force modeset. [ 1.298913@3] [drm] meson_hdmitx_encoder_atomic_mode_set: enter [ 1.298928@3] [drm] meson_hdmitx_choose_preset_mode validate vmode 1080p60hz, 0 [ 1.298933@3] [drm] build_hdmitx_attr_str:444,10bit = 2+10 [ 1.298944@3] [drm] meson_hdmitx_decide_color_attr get fmt attr [2]+[10] [ 1.298948@3] [drm] build_hdmitx_attr_str:444,10bit = 2+10 [ 1.298955@3] [drm] meson_hdmitx_choose_preset_mode update 1080p60hz expect 0 [ 1.298961@3] [drm] am_meson_crtc_atomic_enable-[0] in: new[1080p60hz], old[], vmode[0-4], uboot[0] [ 1.298967@3] [drm] am_meson_crtc_atomic_enable-[0]: enable mode 1080p60hz final vmode 0 [ 1.298985@3] [drm] am_meson_crtc_atomic_enable-[0]: out [ 1.298989@3] [drm] [meson_hdmitx_encoder_atomic_enable] [ 1.299020@3] hdmitx: hdmitx_set_current_vmode[6094] [ 1.299024@3] hdmitx: system: recalc before 1080p60hz 60 1, frac 0 [ 1.299028@3] hdmitx: system: recalc after 1080p60hz 60 1, frac 0 [ 1.299033@3] hdmitx: system: get current mode: 1080p60hz [ 1.299037@3] hdmitx: system: update physical size: 940 540 [ 1.299047@3] hdmitx: hdmitx: display colourdepth is auto set to 12 bits (VIC: 16) [ 1.299068@3] hdmitx: video: already init VIC = 0 Now VIC = 16 [ 1.300094@3] hdmitx: hw: div40: 0 [ 1.327491@3] hdmitx: frac_rate = 0 [ 1.327499@3] hdmitx: config HPLL = 4455000 frac_rate = 0 [ 1.327575@3] hdmitx: HPLL: 0xdb0004b9 [ 1.327578@3] hdmitx: config HPLL done [ 1.327585@3] hdmitx: set_hpll_od3_clk_div[467] div = 10 [ 1.327592@3] hdmitx: j = 4 vid_clk_div = 1 [ 1.327671@3] hdmitx: set enc for VIC: 16 [ 1.327685@3] hdmitx: hw: config hdmitx IP vic = 16 cd:6 cs: 2 [ 1.340819@3] hdmitx: adjust decouple fifo [ 1.377482@3] hdmitx: video: Sink is HDMI device [ 1.377521@3] hdmitx: hw: set audio [ 1.377535@3] hdmitx: fs = 3, cd = 6, tmds_clk = 148500 [ 1.377539@3] hdmitx: hw: aud_n_para = 6144 [ 1.377548@3] hdmitx: hw: set channel status [ 1.377563@3] hdmitx: hw: [0x10e3] = 0x1f [ 1.377594@3] hdmitx: audio: Audio Type: PCM [ 1.377603@3] DOLBY: vout_notify_callback: VOUT_EVENT_MODE_CHANGE [ 1.377628@3] [drm] meson_vout_update_mode_name: hdmitx update vout 1 name 1080p60hz. [ 1.391247@0] [drm] am_meson_load_logo idx[1] [ 1.391261@0] [drm:am_meson_load_logo] *ERROR* NULL MODE or DUMMY MODE, nothing to do. [ 1.391264@0] [drm] vout2 logo is disabled! [ 1.391282@0] [drm] am_meson_load_logo idx[2] [ 1.391287@0] [drm:am_meson_load_logo] *ERROR* NULL MODE or DUMMY MODE, nothing to do. [ 1.391290@0] [drm] vout3 logo is disabled! [ 1.391299@0] [drm] logo_drm_fb[id:98,ref:2] [ 1.391302@0] [drm] am_meson_logo_init end [ 1.391306@0] [drm] am_meson_drm_fbdev_init in [ 1.391759@0] [drm] mode_cmd.width = 4096 [ 1.391763@0] [drm] mode_cmd.height = 4320 [ 1.391766@0] [drm] mode_cmd.pixel_format = 875713089-875713089 [ 1.391781@0] [drm] meson_fb[id:99,ref:1]=0x00000000b2f12d9e,meson_fb->bufp[0]=0x0000000000000000 [ 1.410972@0] [drm] am_meson_drm_fb_helper_set_par IN [ 1.410982@0] [drm] am_meson_drm_fb_helper_set_par OUT [ 1.410990@0] Console: switching to colour frame buffer device 512x135 [ 1.424586@0] [drm] am_meson_free_logo_memory, free memory: addr:0x0x000000007f000000,size:0x800000 [ 1.661896@2] hdmitx: system: plugin [ 1.794167@2] hdmitx: edid: EDID Parser: [ 1.794180@2] [RX]-up_phy_addr = 1 [ 1.794188@2] hdmitx: Edid_ParsingVendSpec:ieeeoui=0xd046,len=11 [ 1.794192@2] hdmitx: v2 VSVDB: len=11, sup_2160p60hz=1, Interface=3 [ 1.794195@2] hdmitx: Edid_ParsingVendSpec:ieeeoui=0xd046,len=11 [ 1.794198@2] hdmitx: v2 VSVDB: len=11, sup_2160p60hz=1, Interface=3 [ 1.794218@2] hdmitx: edid: get dtd0 vic: 97 [ 1.794222@2] hdmitx: edid: get dtd1 vic: 16 [ 1.794225@2] hdmitx: edid: change preferred_mode from 97 to 96 [ 1.794228@2] hdmitx: hdmitx: get PMT vic: 97 [ 1.794232@2] hdmitx: edid: find IEEEOUT [ 1.794236@2] hdmitx: edid: check sum valid [ 1.794239@2] hdmitx: edid: check sum valid [ 1.794248@2] hdmitx: edid: check sum valid [ 1.794250@2] hdmitx: edid: check sum valid [ 1.794255@2] hdmitx: edid: blk0 raw data [ 1.794275@2] hdmitx: edid: [ 1.794275@2] 00ffffffffffff0034a996a20000000000230103805e36780af061a952409f24 [ 1.794275@2] 0d5054afef80b3009500a9409040810081808140010108e80030f2705a80b058 [ 1.794275@2] 8a00501d7400001e023a801871382d40582c4500501d7400001e000000fc0050 [ 1.794275@2] 616e61736f6e69632d54560a000000fd00303e0f463c000a20202020202001f1 [ 1.794275@2] [ 1.794275@2] [ 1.794279@2] hdmitx: edid: blk1 raw data [ 1.794298@2] hdmitx: edid: [ 1.794298@2] 02035af05160611f10041305140301122021225d5e5f2c097f07150750570701 [ 1.794298@2] 670407830100006d030c001000b84420006003020167d85dc40178800be200cf [ 1.794298@2] e50f03000000e3060f01e305e301eb0146d0004d9e4ba4322fbf000000000000 [ 1.794298@2] 0000000000000000000000000000000000000000000000000000000000000056 [ 1.794298@2] [ 1.794298@2] [ 1.794302@2] hdmitx: system: update physical size: 940 540 [ 1.794307@2] hdmitx: system: get current mode: 1080p60hz [ 1.794310@2] hdmitx: system: update physical size: 940 540 [ 1.794330@2] hdmitx: hdmitx: display colourdepth is auto set to 12 bits (VIC: 16) [ 1.794345@2] hdmitx: video: already init VIC = 0 Now VIC = 16 [ 1.795367@2] hdmitx: hw: div40: 0 [ 1.823500@2] hdmitx: frac_rate = 0 [ 1.823507@2] hdmitx: config HPLL = 4455000 frac_rate = 0 [ 1.823581@2] hdmitx: HPLL: 0xdb0004b9 [ 1.823584@2] hdmitx: config HPLL done [ 1.823590@2] hdmitx: set_hpll_od3_clk_div[467] div = 10 [ 1.823597@2] hdmitx: j = 4 vid_clk_div = 1 [ 1.823677@2] hdmitx: set enc for VIC: 16 [ 1.823691@2] hdmitx: hw: config hdmitx IP vic = 16 cd:6 cs: 2 [ 1.836826@2] hdmitx: adjust decouple fifo [ 1.873484@2] hdmitx: video: Sink is HDMI device [ 1.873521@2] hdmitx: hw: set audio [ 1.873535@2] hdmitx: fs = 3, cd = 6, tmds_clk = 148500 [ 1.873539@2] hdmitx: hw: aud_n_para = 6144 [ 1.873548@2] hdmitx: hw: set channel status [ 1.873563@2] hdmitx: hw: [0x10e3] = 0x1f [ 1.873592@2] hdmitx: audio: Audio Type: PCM [ 1.873597@2] hdmitx: hw: set audio [ 1.873609@2] hdmitx: fs = 3, cd = 6, tmds_clk = 148500 [ 1.873612@2] hdmitx: hw: aud_n_para = 6144 [ 1.873620@2] hdmitx: hw: set channel status [ 1.873635@2] hdmitx: hw: [0x10e3] = 0x1f [ 1.873663@2] hdmitx: audio: Audio Type: PCM [ 1.873694@2] [drm] drm hdmitx hpd notify [ 1.873700@2] [drm] meson_hdmitx_hpd_cb[1993] [ 2.209843@3] meson drm-subsystem: fb0: mesondrmfb frame buffer device [ 2.209884@3] [drm] create fbdev success. [ 2.209890@3] [drm] create fbdev for primary plane [00000000c3152bca] [ 2.210376@3] [drm] mode_cmd.width = 4096 [ 2.210380@3] [drm] mode_cmd.height = 4320 [ 2.210383@3] [drm] mode_cmd.pixel_format = 875713089-875713089 [ 2.210398@3] [drm] meson_fb[id:101,ref:1]=0x000000000e56316a,meson_fb->bufp[0]=0x0000000000000000 [ 2.210619@1] meson drm-subsystem: fb1: mesondrmfb frame buffer device [ 2.210627@1] [drm] create fbdev success. [ 2.210631@1] [drm] create fbdev for plane [1]-[00000000d03fcc8c] [ 2.211034@1] [drm] mode_cmd.width = 4096 [ 2.211038@1] [drm] mode_cmd.height = 4320 [ 2.211041@1] [drm] mode_cmd.pixel_format = 875713089-875713089 [ 2.211052@1] [drm] meson_fb[id:98,ref:1]=0x00000000a58413d5,meson_fb->bufp[0]=0x0000000000000000 [ 2.211452@2] meson drm-subsystem: fb2: mesondrmfb frame buffer device [ 2.211458@2] [drm] create fbdev success. [ 2.211462@2] [drm] create fbdev for plane [2]-[0000000050c59b83] [ 2.211466@2] [drm] am_meson_drm_fbdev_init create 3 out [ 2.212097@1] [drm] Initialized meson 2.0.0 20220613 for drm-subsystem on minor 0 [ 2.212541@1] audio_dsp: [dsp]register dsp to char device(272) [ 2.212898@2] amaudio: amaudio: driver amaudio init! [ 2.213138@1] amaudio: amaudio_init - amaudio: driver amaudio success! [ 2.214166@0] gxbb_pm: enter meson_pm_probe! [ 2.214195@0] pm-meson fe010288.pm: Vad enable not detected ~~~ [ 2.214200@0] pm-meson fe010288.pm: Not found item name in dts.The default item will be used! [ 2.214204@0] pm-meson fe010288.pm: Does not match the item type, use the default [init] function. [ 2.214234@0] pm-meson fe010288.pm: Read dmc_asr addr fail [ 2.214240@0] pm-meson fe010288.pm: IRQ pm_wakeup not found [ 2.215010@0] pm-meson fe010288.pm: Failed to get pm_wakeup interrupt source:-6 [ 2.215014@0] gxbb_pm: meson_pm_probe done [ 2.216594@3] meson_uart fe07a000.serial: ==uart0 reg addr = 0000000052a6010a [ 2.216636@3] fe07a000.serial: ttyS0 at MMIO 0xfe07a000 (irq = 25, base_baud = 1500000) is a meson_uart [ 2.257693@3] printk: console [ttyS0] enabled [ 2.258170@0] meson_uart fe080000.serial: ==uart1 reg addr = 00000000ae63ca00 [ 2.258631@1] fe080000.serial: ttyS1 at MMIO 0xfe080000 (irq = 43, base_baud = 1500000) is a meson_uart [ 2.258947@0] amlogic rfkill init [ 2.259265@0] request_irq error ret=-22 [ 2.259872@0] dev_pm_set_wake_irq failed: -22 [ 2.260551@0] input: input_btrcu as /devices/platform/aml_bt/input/input1 [ 2.261303@1] amlogic-new-usb2-v2 fe03a000.usb2phy: USB2 phy probe:phy_mem:0xfe03a000, iomap phy_base:0xffffffc0179e3000 [ 2.261613@1] amlogic-new-usb3-v2 fe03a080.usb3phy: This is normal phy [ 2.262774@1] amlogic-new-usb3-v2 fe03a080.usb3phy: USB3 phy probe:phy_mem:0xfe03a080, iomap phy_base:0xffffffc0179ed080 [ 2.264320@1] meson_clk_pcie_pll_enable:513 retry = 10 [ 2.265739@2] bl30_manager: driver init [ 2.265977@3] usbcore: registered new interface driver snd-usb-audio [ 2.266357@3] +es8388_init() [ 2.266434@3] +es8388_i2c_probe() [ 2.266443@3] es8388_i2c_probe() spk_ctl_gpio < 0 [ 2.266446@3] es8388 pdn pin(4294967295) is invalid [ 2.266604@0] es8388 probe error [ 2.266619@0] ES8388: probe of 3-0010 failed with error -11 [ 2.266914@0] aml_codec_T9015 fe01a000.t9015: aml_T9015_audio_codec_probe [ 2.267011@0] T9015 acodec tdmout index:1 [ 2.267604@0] asoc debug: aml_audio_controller_probe-146 [ 2.268551@0] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 2.268563@0] aml_tdm_platform_probe sys-src clk rate from dts:491520000 [ 2.268570@0] snd_tdm fe330000.audiobus:tdm@1: Can't retrieve suspend-clk-off [ 2.269762@0] TDM id 1 samesource_sel:3 [ 2.269769@0] snd_tdm fe330000.audiobus:tdm@1: lane_mask_out = f [ 2.269851@0] TDM id 1 output clk enable:1 [ 2.269861@0] master_mode(1), binv(1), finv(1) out_skew(2), in_skew(3) [ 2.269898@0] No channel mask node Channel_Mask [ 2.269911@0] TDM id 1 tuning clk enable:1 [ 2.270001@0] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 2.270014@0] snd_tdm fe330000.audiobus:i2s2hdmi: Can't retrieve suspend-clk-off [ 2.271369@0] TDM id 2 i2s2hdmi:1 [ 2.271376@0] snd_tdm fe330000.audiobus:i2s2hdmi: lane_mask_out = f [ 2.271391@0] snd_tdm fe330000.audiobus:i2s2hdmi: no clk_src_cd clock for 44k case [ 2.271409@0] No channel mask node Channel_Mask [ 2.272054@0] aml_spdif_platform_probe, spdif ID = 0 [ 2.272061@0] snd_spdif fe330000.audiobus:spdif@0: Can't retrieve suspend-clk-off [ 2.273326@0] aml_spdif_parse_of sys-src clk rate from dts:491520000 [ 2.273543@0] Spdif id 0 tuning clk enable:1 [ 2.273597@0] aml_spdif_platform_probe, spdif ID = 1 [ 2.273603@0] snd_spdif fe330000.audiobus:spdif@1: Can't retrieve suspend-clk-off [ 2.274865@0] aml_spdif_parse_of sys-src clk rate from dts:491520000 [ 2.274873@0] snd_spdif fe330000.audiobus:spdif@1: spdif 1 has no pinctrl! [ 2.275471@0] audio-ddr-manager fe330000.audiobus:ddr_manager: 0, irqs toddr 27 [ 2.275481@0] audio-ddr-manager fe330000.audiobus:ddr_manager: 1, irqs toddr 28 [ 2.275491@0] audio-ddr-manager fe330000.audiobus:ddr_manager: 2, irqs toddr 29 [ 2.275500@0] audio-ddr-manager fe330000.audiobus:ddr_manager: 3, irqs toddr 30 [ 2.275510@0] audio-ddr-manager fe330000.audiobus:ddr_manager: 0, irqs frddr 31 [ 2.275519@0] audio-ddr-manager fe330000.audiobus:ddr_manager: 1, irqs frddr 32 [ 2.275528@0] audio-ddr-manager fe330000.audiobus:ddr_manager: 2, irqs frddr 33 [ 2.275537@0] audio-ddr-manager fe330000.audiobus:ddr_manager: 3, irqs frddr 34 [ 2.276024@0] datain_src:4, datain_chnum:0, datain_chumask:0 [ 2.276028@0] datalb_src:1, datalb_chnum:2, datalb_chmask:3 [ 2.276031@0] datain_lane_mask:0x0, datalb_lane_mask:0x1 [ 2.276035@0] datalb_format: 1, chmask for lanes: 0x3 [ 2.276087@0] loopback_platform_probe, p_loopback->id:0 register soc platform [ 2.276993@0] vad_platform_probe, failed to get vad wakeup sample rate [ 2.278054@0] vad_platform_probe, vad wakeup sample rate = 16000 [ 2.278060@0] VAD fe330000.audiobus:vad: check whether to update vad chipinfo [ 2.278109@0] vad_platform_probe vad data source sel:4, level:1 [ 2.278199@0] input: vad_keypad as /devices/platform/soc/fe330000.audiobus/fe330000.audiobus:vad/input/input2 [ 2.279079@3] Register vad [ 2.279404@3] asoc-aml-card auge_sound: IRQ audio_exception64 not found [ 2.280606@3] call standard reset interface [ 2.485604@3] dummy soc:dummy: ASoC: source widget Left DAC overwritten [ 2.485709@3] aml_spdif_new spdif_b, clk continuous:1 [ 2.485714@3] spdifout_play_with_zerodata_free, spdif id:1 [ 2.485726@3] asoc-aml-card auge_sound: SPDIF-B <-> SPDIF-B mapping ok [ 2.485741@3] master_mode(1), binv(1), finv(1) out_skew(2), in_skew(3) [ 2.485787@3] asoc-aml-card auge_sound: fe01a000.t9015 <-> TDM-B mapping ok [ 2.485831@3] aml_spdif_new spdif_a, clk continuous:1 [ 2.485835@3] spdifout_play_with_zerodata_free, spdif id:0 [ 2.485844@3] asoc-aml-card auge_sound: SPDIF <-> SPDIF mapping ok [ 2.485852@3] master_mode(1), binv(1), finv(1) out_skew(2), in_skew(3) [ 2.485898@3] asoc-aml-card auge_sound: soc:dummy <-> TDM-C mapping ok [ 2.488343@1] snd_card_add_kcontrols card:0000000051345263 [ 2.488357@1] effect_v2 is not init [ 2.488384@1] no node audio_effect for eq/drc info! [ 2.488907@1] netem: version 1.3 [ 2.488913@1] u32 classifier [ 2.488916@1] input device check on [ 2.488919@1] Actions configured [ 2.489289@1] gre: GRE over IPv4 demultiplexor driver [ 2.489521@1] Initializing XFRM netlink socket [ 2.489542@1] IPsec XFRM device driver [ 2.489914@1] NET: Registered protocol family 10 [ 2.490867@3] Segment Routing with IPv6 [ 2.490958@3] mip6: Mobile IPv6 [ 2.491016@3] NET: Registered protocol family 17 [ 2.491028@3] NET: Registered protocol family 15 [ 2.491070@3] l2tp_core: L2TP core driver, V2.0 [ 2.491077@3] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 2.491099@3] Key type dns_resolver registered [ 2.493437@3] registered taskstats version 1 [ 2.493442@3] Loading compiled-in X.509 certificates [ 2.493756@3] Key type ._fscrypt registered [ 2.493761@3] Key type .fscrypt registered [ 2.493765@3] Key type fscrypt-provisioning registered [ 2.494057@3] pstore: Using crash dump compression: deflate [ 2.510577@3] hifi4dsp: hifi4dsp_platform_probe of read dsp-cnt=1 [ 2.510590@3] hifi4dsp: hifi4dsp_platform_probe of read dsp_start_mode = 1 [ 2.510594@3] hifi4dsp: hifi4dsp_platform_probe of read dspaoffset=0x00000000 [ 2.510598@3] hifi4dsp: hifi4dsp_platform_probe of read dspboffset=0x00800000 [ 2.510602@3] hifi4dsp: hifi4dsp_platform_probe of read dsp bootlocation=1 [ 2.510605@3] hifi4dsp: Dsp boot from DDR ! [ 2.510646@3] hifi4dsp: reserved memory init fail:-22 [ 2.510672@3] hifi4dsp: probe of fe340000.hifi4dsp failed with error -12 [ 2.511300@3] mdio_bus 0.0: ethernet-phy@0 has invalid PHY address [ 2.512235@3] mdio_bus 0.0: scan phy ethernet-phy at address 0 [ 2.591651@3] ****maxio_mae0621a_clk_init**clkmode**0x200a: 0x7b744411 [ 2.702748@3] wzh txamp 0x32 [ 2.705134@3] dwc3 fde00000.dwc3: fde00000.dwc3 supply usb1v8 not found, using dummy regulator [ 2.705281@3] dwc3 fde00000.dwc3: fde00000.dwc3 supply usb3v3 not found, using dummy regulator [ 2.705319@3] dwc3 fde00000.dwc3: fde00000.dwc3 supply usb5v not found, using dummy regulator [ 2.705557@3] amlogic-new-usb2-v2 fe03a000.usb2phy: Not usb-phy-trim-reg [ 2.706622@3] amlogic-new-usb2-v2 fe03a000.usb2phy: Not usb-phy-trim-reg [ 2.710577@3] amlogic-new-usb2-v2 fe03a000.usb2phy: Not usb-phy-trim-reg [ 2.711616@3] amlogic-new-usb2-v2 fe03a000.usb2phy: Not usb-phy-trim-reg [ 2.712850@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.712867@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.713001@3] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x0000020020010010 [ 2.713037@3] xhci-hcd xhci-hcd.0.auto: irq 67, io mem 0xfde00000 [ 2.713256@3] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 2.713262@3] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.713266@3] usb usb1: Product: xHCI Host Controller [ 2.713270@3] usb usb1: Manufacturer: Linux 5.4.210 xhci-hcd [ 2.713274@3] usb usb1: SerialNumber: xhci-hcd.0.auto [ 2.713645@3] hub 1-0:1.0: USB hub found [ 2.713668@3] hub 1-0:1.0: 2 ports detected [ 2.713888@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.713899@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.713910@3] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 2.713951@3] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.714016@3] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 2.714021@3] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.714025@3] usb usb2: Product: xHCI Host Controller [ 2.714029@3] usb usb2: Manufacturer: Linux 5.4.210 xhci-hcd [ 2.714033@3] usb usb2: SerialNumber: xhci-hcd.0.auto [ 2.714573@3] hub 2-0:1.0: USB hub found [ 2.714593@3] hub 2-0:1.0: 1 port detected [ 2.715497@2] meson ts init [ 2.715515@2] tsensor id: 0 [ 2.715536@2] meson-tsensor fe020000.p_tsensor: Does not support reset func.. [ 2.715563@2] tsensor rtemp :110000 [ 2.733518@2] [r1p1_tsensor_read (efault)]valid cnt is 0, tvalue:0 [ 2.753547@2] meson ts init [ 2.753561@2] tsensor id: 1 [ 2.753578@2] meson-tsensor fe022000.d_tsensor: Does not support reset func.. [ 2.753602@2] tsensor rtemp :110000 [ 2.773735@2] [r1p1_tsensor_read (efault)]valid cnt is 0, tvalue:0 [ 2.794086@2] meson_cdev probe [ 2.794096@2] meson_cdev index: 0 [ 2.794270@2] cpucore_cooling_register, max_cpu_core_num:4 [ 2.794323@2] meson_cdev index: 1 [ 2.794330@2] meson_cdev probe done [ 2.795203@2] dwc_otg fdd00000.dwc2_a: dwc_otg_driver_probe(00000000187b32e3) [ 2.795236@2] dwc_otg: usb0: type: 2 speed: 0, [ 2.795239@2] config: 0, dma: 0, id: 0, [ 2.795242@2] phy: fe03a000, ctrl: 0 [ 2.795258@2] dwc_otg fdd00000.dwc2_a: base=0xffffffc017c00000 [ 2.795263@2] dwc_otg fdd00000.dwc2_a: dwc_otg_device=0x0000000039626256 [ 2.795697@2] dwc_otg: Core Release: 3.30a [ 2.795704@2] dwc_otg: Setting default values for core params [ 2.795715@2] dwc_otg: curmode: 0, host_only: 0 [ 2.795734@2] dwc_otg fdd00000.dwc2_a: DMA config: BURST_DEFAULT [ 2.807850@2] dwc_otg: Using Buffer DMA mode [ 2.807856@2] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 2.807860@2] dwc_otg: Working on port type = SLAVE [ 2.807866@2] dwc_otg: Dedicated Tx FIFOs mode [ 2.808727@2] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.810327@1] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.810623@1] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.810631@1] cfg80211: failed to load regulatory.db [ 2.811369@0] ALSA device list: [ 2.811376@0] #0: AML-AUGESOUND [ 2.814655@0] Freeing unused kernel memory: 7232K [ 2.841544@2] Run /init as init process [ 2.841746@3] Now can use cma1, free:164700, wm:1915, cma:320512, total:504289 [ 2.877440@3] [drm] am_meson_drm_fb_helper_set_par IN [ 2.877454@3] [drm] am_meson_drm_fb_helper_set_par OUT [ 3.005756@1] av out status: high [ 3.512097@1] init: ### Loading kernel modules [ 3.512197@1] init: ### Set console font [ 3.514776@2] init: ### Checking disk(s): LABEL=COREELEC LABEL=STORAGE [ 3.729599@0] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd [ 3.750426@0] usb 2-1: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00 [ 3.750437@0] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.750442@0] usb 2-1: Product: Ultra [ 3.750446@0] usb 2-1: Manufacturer: SanDisk [ 3.750450@0] usb 2-1: SerialNumber: 0501893d2719e72262867ea2aa7c4e4a50ae52fd5bbdb46b885546727c13d0c584ed00000000000000000000b0326c8eff1b1510815581077f262af8 [ 3.751529@0] usb-storage 2-1:1.0: USB Mass Storage device detected [ 3.751875@0] scsi host0: usb-storage 2-1:1.0 [ 3.846883@1] init: ### fsck: couldn't find matching filesystem: LABEL=COREELEC [ 3.877516@3] usb 1-2: new low-speed USB device number 3 using xhci-hcd [ 4.028776@3] usb 1-2: New USB device found, idVendor=0458, idProduct=003a, bcdDevice= 1.00 [ 4.028786@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.028791@3] usb 1-2: Product: Optical Mouse [ 4.028795@3] usb 1-2: Manufacturer: Genius [ 4.029498@3] lcd vlock_en=0, vlock_mode=0x8 i=101 [ 4.046820@3] input: Genius Optical Mouse as /devices/platform/soc/soc:usb@fde00000/fde00000.dwc3/xhci-hcd.0.auto/usb1/1-2/1-2:1.0/0003:0458:003A.0001/input/input3 [ 4.047115@3] hid-generic 0003:0458:003A.0001: input,hidraw0: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-xhci-hcd.0.auto-2/input0 [ 4.657536@3] init: ### fsck: couldn't find matching filesystem: LABEL=COREELEC [ 4.766514@0] scsi 0:0:0:0: Direct-Access SanDisk Ultra 1.00 PQ: 0 ANSI: 6 [ 4.767145@0] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.767730@0] sd 0:0:0:0: [sda] 30031872 512-byte logical blocks: (15.4 GB/14.3 GiB) [ 4.768549@0] sd 0:0:0:0: [sda] Write Protect is off [ 4.768558@0] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 4.768877@0] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 4.792908@0] sda: sda1 sda2 [ 4.794671@0] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 5.474526@2] init: ### fsck.fat 4.2 (2021-01-31) [ 5.474685@2] init: ### /dev/sda1: 36 files, 33698/65501 clusters [ 5.474785@2] init: ### STORAGE: recovering journal [ 5.474945@2] init: ### STORAGE: clean, 114/905760 files, 84107/3621888 blocks [ 5.475971@0] init: ### No filesystem errors found, continuing... [ 5.476083@0] init: ### Mounting flash [ 5.476150@0] init: ### mount filesystem LABEL=COREELEC ... [ 5.577513@0] init: ### Cleaning up flash (if required) [ 5.577934@0] init: ### mount filesystem /flash/SYSTEM ... [ 5.648092@0] init: ### Mounting storage [ 5.648258@0] init: ### mount filesystem LABEL=STORAGE ... [ 5.737754@0] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 5.752612@0] init: ### Loading bootsplash [ 5.757705@0] init: ### Checking for updates [ 5.763089@3] init: ### Preparing system [ 5.791910@3] init: ### Checking Amlogic DTB [ 6.070813@3] ### BIG FAT WARNING [ 6.070862@3] ### sda2 is removable. suspend/resume may not work [ 6.076132@3] ### BIG FAT WARNING [ 6.076180@3] ### sda1 is removable. suspend/resume may not work [ 6.146868@2] kernel-overlays-setup: setup base modules [ 6.205888@2] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/5.4.210 [ 6.262844@2] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware [ 6.263352@2] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays [ 6.264554@0] kernel-overlays-setup: done [ 6.423901@3] systemd[1]: systemd 255.4 running in system mode (-PAM -AUDIT -SELINUX -APPARMOR -IMA -SMACK -SECCOMP -GCRYPT -GNUTLS -OPENSSL -ACL +BLKID -CURL -ELFUTILS -FIDO2 +IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP -LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -TPM2 -BZIP2 -LZ4 -XZ -ZLIB -ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [ 6.423926@3] systemd[1]: Detected architecture arm64. [ 6.685449@3] systemd[1]: Queued start job for default target kodi.target. [ 6.720655@2] systemd[1]: Created slice system-modprobe.slice. [ 6.722629@2] systemd[1]: Created slice system-wg\x2dquick.slice. [ 6.724094@2] systemd[1]: Created slice user.slice. [ 6.724464@2] systemd[1]: Started systemd-ask-password-console.path. [ 6.724650@2] systemd[1]: Started systemd-ask-password-wall.path. [ 6.724815@2] systemd[1]: Reached target nss-lookup.target. [ 6.724859@2] systemd[1]: Reached target paths.target. [ 6.724952@2] systemd[1]: Reached target slices.target. [ 6.740835@3] systemd[1]: Listening on rpcbind.socket. [ 6.740989@3] systemd[1]: Reached target rpcbind.target. [ 6.741388@3] systemd[1]: Listening on systemd-initctl.socket. [ 6.742066@3] systemd[1]: Listening on systemd-journald-dev-log.socket. [ 6.742562@3] systemd[1]: Listening on systemd-journald.socket. [ 6.743420@3] systemd[1]: Listening on systemd-udevd-control.socket. [ 6.743801@3] systemd[1]: Listening on systemd-udevd-kernel.socket. [ 6.749197@3] systemd[1]: Mounting dev-mqueue.mount... [ 6.754055@3] systemd[1]: Mounting sys-kernel-debug.mount... [ 6.758340@3] systemd[1]: Mounting sys-kernel-tracing.mount... [ 6.762254@3] systemd[1]: Mounting var.mount... [ 6.774456@0] systemd[1]: Starting kmod-static-nodes.service... [ 6.780063@0] systemd[1]: Starting machine-id.service... [ 6.789521@2] systemd[1]: Starting modprobe@configfs.service... [ 6.793662@2] systemd[1]: Starting modprobe@drm.service... [ 6.798061@2] systemd[1]: Starting modprobe@fuse.service... [ 6.803303@2] systemd[1]: Starting storage-log.service... [ 6.811848@2] systemd[1]: Starting swap.service... [ 6.825829@2] systemd[1]: Starting systemd-hwdb-update.service... [ 6.841398@0] systemd[1]: Starting systemd-modules-load.service... [ 6.845863@0] systemd[1]: Starting systemd-timesyncd-setup.service... [ 6.851448@0] systemd[1]: Starting systemd-udev-trigger.service... [ 6.858913@0] systemd[1]: Starting wait-time-sync.service... [ 6.866564@0] systemd[1]: Mounted dev-mqueue.mount. [ 6.867178@0] systemd[1]: Mounted sys-kernel-debug.mount. [ 6.867686@0] systemd[1]: Mounted sys-kernel-tracing.mount. [ 6.868317@0] systemd[1]: Mounted var.mount. [ 6.870069@0] systemd[1]: Finished kmod-static-nodes.service. [ 6.871946@0] systemd[1]: Finished machine-id.service. [ 6.873127@0] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 6.874682@0] systemd[1]: Finished modprobe@configfs.service. [ 6.875945@0] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 6.877027@0] systemd[1]: Finished modprobe@drm.service. [ 6.878530@0] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 6.879438@0] systemd[1]: Finished modprobe@fuse.service. [ 6.919938@1] systemd[1]: Mounting sys-fs-fuse-connections.mount... [ 6.924546@1] systemd[1]: Mounting sys-kernel-config.mount... [ 6.930354@3] wifi_dummy: loading out-of-tree module taints kernel. [ 6.930699@3] wifi_dummy: Triggered SDIO/PCIe WiFi power on and bus rescan [ 6.930755@3] wifi_dummy: found enabled sdio@fe088000 [ 6.930768@3] wifi_dummy: found disabled pcie@f5000000 [ 6.930865@3] wifi_dummy: SDIO enabled, PCIe disabled [ 6.930888@3] aml_wifi aml_wifi: [extern_wifi_set_enable] WIFI Disable! 481 [ 6.939662@1] systemd[1]: Starting systemd-journald.service... [ 6.948468@1] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service... [ 6.950362@1] systemd[1]: Finished systemd-timesyncd-setup.service. [ 6.951776@1] systemd[1]: Finished storage-log.service. [ 6.957717@1] systemd[1]: Finished swap.service. [ 6.958374@1] systemd[1]: Mounted sys-fs-fuse-connections.mount. [ 6.958809@1] systemd[1]: Reached target swap.target. [ 6.970143@2] systemd[1]: Mounting tmp.mount... [ 6.971233@2] systemd[1]: var-log.mount was skipped because no trigger condition checks were met. [ 6.974763@2] systemd[1]: Mounted sys-kernel-config.mount. [ 6.995210@2] systemd-journald[424]: Collecting audit messages is disabled. [ 7.007520@2] systemd[1]: Mounted tmp.mount. [ 7.042128@0] systemd[1]: Finished systemd-tmpfiles-setup-dev-early.service. [ 7.046668@0] systemd[1]: Starting systemd-tmpfiles-setup-dev.service... [ 7.075944@0] systemd[1]: Finished systemd-tmpfiles-setup-dev.service. [ 7.076336@0] systemd[1]: Reached target local-fs-pre.target. [ 7.076412@0] systemd[1]: Reached target local-fs.target. [ 7.081134@0] systemd[1]: Listening on systemd-sysext.socket. [ 7.085000@0] systemd[1]: Starting restore-storage-permissions.service... [ 7.140172@0] systemd[1]: Started systemd-journald.service. [ 7.186963@2] systemd-journald[424]: Received client request to flush runtime journal. [ 7.261578@0] aml_wifi aml_wifi: [extern_wifi_set_enable] WIFI Enable! 481 [ 7.582477@0] meson-gx-mmc fe088000.sdio: 52 [0xc00], TIMEOUT[0x2800] [ 7.583511@0] meson-gx-mmc fe088000.sdio: 52 [0x80000c08], TIMEOUT[0x2800] [ 7.588873@0] meson-gx-mmc fe088000.sdio: 8 [0x1aa], TIMEOUT[0x2800] [ 7.619749@3] mmc2: queuing unknown CIS tuple 0x80 (2 bytes) [ 7.622059@3] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) [ 7.624359@3] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) [ 7.629296@3] mmc2: queuing unknown CIS tuple 0x80 (7 bytes) [ 7.635924@3] mmc2: queuing unknown CIS tuple 0x8e (9 bytes) [ 7.756114@3] Data 1 aligned delay is 0 [ 7.756131@3] mmc2: clk 199999997 div 5 tuning start [ 7.758517@3] mmc2: adj_win: < 0 1 3 4 > [ 7.758529@3] mmc2: adj_win: < 0 1 3 4 > [ 7.758536@3] step:4, delay1:0x104104, delay2:0x4000000 [ 7.760589@3] mmc2: adj_win: < 0 1 3 4 > [ 7.760604@3] step:8, delay1:0x208208, delay2:0x8000000 [ 7.763564@3] mmc2: adj_win: < 0 1 2 3 4 > [ 7.763580@3] step:12, delay1:0x30c30c, delay2:0xc000000 [ 7.765984@3] mmc2: adj_win: < 0 1 2 4 > [ 7.765998@3] tuning-c:0, tuning-s:4 [ 7.766004@3] step:0, delay1:0x0, delay2:0x0 [ 7.766010@3] mmc2: clk= 0x10000205, adj = 0x2000, dly1 = 0, dly2 = 0 [ 7.767247@3] mmc2: new ultra high speed SDR104 SDIO card at address 0001 [ 7.767258@0] mmc2: clock 199999997, 4-bit-bus-width [ 7.767258@0] [ 7.767604@0] [sdio_reinit] finish [ 9.187042@3] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 9.277417@3] Console: switching to colour dummy device 80x25 [ 9.406859@2] amlvideo2 canvas alloc done fa, fb, fc [ 9.428927@2] amlvideo2 canvas alloc done fd, fe, ff [ 9.440091@3] ionvid: dbg: vidioc_open [ 9.440091@3] [ 9.440202@3] ionvid: dbg: vidioc_close!!!! [ 9.440202@3] [ 9.440225@3] ionvid: dbg: vidioc_close [ 9.440225@3] [ 9.452426@3] ionvid: dbg: vidioc_open [ 9.452426@3] [ 9.452578@3] ionvid: dbg: vidioc_close!!!! [ 9.452578@3] [ 9.452604@0] ionvid: dbg: vidioc_close [ 9.452604@0] [ 9.467504@0] ionvid: dbg: vidioc_open [ 9.467504@0] [ 9.467626@0] ionvid: dbg: vidioc_close!!!! [ 9.467626@0] [ 9.467647@2] ionvid: dbg: vidioc_close [ 9.467647@2] [ 9.471811@2] amlvideo2.1 cma memory is 30000000 , size is 1800000 [ 9.472015@2] amlvideo2 canvas free fa, fb, fc [ 9.472169@2] amlvideo2.1 cma memory release succeed [ 9.477319@3] ionvid: dbg: vidioc_open [ 9.477319@3] [ 9.477436@3] ionvid: dbg: vidioc_close!!!! [ 9.477436@3] [ 9.477461@3] ionvid: dbg: vidioc_close [ 9.477461@3] [ 9.482561@3] ionvid: dbg: vidioc_open [ 9.482561@3] [ 9.482701@3] ionvid: dbg: vidioc_close!!!! [ 9.482701@3] [ 9.482725@0] ionvid: dbg: vidioc_close [ 9.482725@0] [ 9.496921@3] ionvid: dbg: vidioc_open [ 9.496921@3] [ 9.497023@3] amlvideo2.0 cma memory is 30000000 , size is 1800000 [ 9.497091@0] ionvid: dbg: vidioc_close!!!! [ 9.497091@0] [ 9.497114@3] ionvid: dbg: vidioc_close [ 9.497114@3] [ 9.497167@3] amlvideo2 canvas free fd, fe, ff [ 9.497460@3] amlvideo2.0 cma memory release succeed [ 9.529625@0] ionvid: dbg: vidioc_open [ 9.529625@0] [ 9.529756@0] ionvid: dbg: vidioc_close!!!! [ 9.529756@0] [ 9.529782@0] ionvid: dbg: vidioc_close [ 9.529782@0] [ 9.555565@0] ionvid: dbg: vidioc_open [ 9.555565@0] [ 9.555691@0] ionvid: dbg: vidioc_close!!!! [ 9.555691@0] [ 9.555717@0] ionvid: dbg: vidioc_close [ 9.555717@0] [ 9.631075@0] mali fe400000.bifrost: Kernel DDK version r37p0-01eac0 [ 9.631485@0] mali fe400000.bifrost: max pp is 2 [ 9.631497@0] mali fe400000.bifrost: set min pp to default 1 [ 9.631501@0] mali fe400000.bifrost: min pp is 1 [ 9.631505@0] mali fe400000.bifrost: set min clk default to 0 [ 9.631509@0] mali fe400000.bifrost: min clk is 0 [ 9.631542@0] mali fe400000.bifrost: hiu io source 0x00000000cb4a074b [ 9.631553@0] mali fe400000.bifrost: aobus base 0x000000001607197c [ 9.631564@0] mali fe400000.bifrost: reset bus 0x0000000013f00ca9 [ 9.631568@0] mali fe400000.bifrost: clk cntl reg = 0x0 [ 9.631572@0] mali fe400000.bifrost: num of pp used most of time 1 [ 9.631576@0] mali fe400000.bifrost: clock dvfs cfg table size is 6 [ 9.631589@0] mali fe400000.bifrost: no reset_cfg [ 9.631595@0] mali fe400000.bifrost: no apb_reset [ 9.631609@0] mali fe400000.bifrost: max clk set 4 [ 9.631613@0] mali fe400000.bifrost: max clk is 4 [ 9.631617@0] mali fe400000.bifrost: turbo clk set to 5 [ 9.631621@0] mali fe400000.bifrost: turbo clk is 5 [ 9.631625@0] mali fe400000.bifrost: default clk set to 4 [ 9.631628@0] mali fe400000.bifrost: default clk is 4 [ 9.631634@0] mali fe400000.bifrost: ====================0==================== [ 9.631634@0] clk_freq= 285714285, clk_parent=fclk_div7, voltage=1150, keep_count=5, threshold=<0 76>, clk_sample=285 [ 9.631639@0] mali fe400000.bifrost: ====================1==================== [ 9.631639@0] clk_freq= 400000000, clk_parent=fclk_div5, voltage=1150, keep_count=5, threshold=<80 120>, clk_sample=400 [ 9.631644@0] mali fe400000.bifrost: ====================2==================== [ 9.631644@0] clk_freq= 500000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshold=<80 120>, clk_sample=500 [ 9.631650@0] mali fe400000.bifrost: ====================3==================== [ 9.631650@0] clk_freq= 666666666, clk_parent=fclk_div3, voltage=1150, keep_count=5, threshold=<80 120>, clk_sample=666 [ 9.631656@0] mali fe400000.bifrost: ====================4==================== [ 9.631656@0] clk_freq= 846000000, clk_parent= gp0_pll, voltage=1150, keep_count=5, threshold=<80 255>, clk_sample=846 [ 9.631661@0] mali fe400000.bifrost: ====================5==================== [ 9.631661@0] clk_freq= 846000000, clk_parent= gp0_pll, voltage=1150, keep_count=5, threshold=<80 255>, clk_sample=846 [ 9.631665@0] mali fe400000.bifrost: clock dvfs table size is 6 [ 9.631683@0] kernel version >= 5.4 [ 9.642986@0] ionvid: dbg: vidioc_open [ 9.642986@0] [ 9.644504@0] ionvid: dbg: vidioc_close!!!! [ 9.644504@0] [ 9.644829@0] ionvid: dbg: vidioc_close [ 9.644829@0] [ 9.649732@0] gpu cooling register okay with err=0 [ 9.649882@0] gpu core cooling register okay with err=0 [ 9.649897@0] mali fe400000.bifrost: kbase_device_runtime_init [ 9.649907@0] mali fe400000.bifrost: pm_callback_runtime_on [ 9.649915@0] mali fe400000.bifrost: pm_runtime_get_sync ret=0 [ 9.649920@0] mali fe400000.bifrost: pm_runtime enabled [ 9.649938@0] mali fe400000.bifrost: shader_present=1, tiler_present=1, l2_present=1 [ 9.650113@0] mali fe400000.bifrost: GPU identified as 0x3 arch 7.0.9 r0p0 status 0 [ 9.650206@0] mali fe400000.bifrost: No priority control manager is configured [ 9.650218@0] mali fe400000.bifrost: No memory group manager is configured [ 9.677952@0] mali fe400000.bifrost: Probed as mali0 [ 10.013426@2] device-mapper: uevent: version 1.0.3 [ 10.025559@2] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com [ 10.328576@2] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null) [ 10.440801@2] v4lvid: dbg: v4lvideo open [ 10.440939@2] v4lvid: dbg: vidioc_close!!!! [ 10.443408@1] v4lvid: dbg: v4lvideo open [ 10.443555@1] v4lvid: dbg: vidioc_close!!!! [ 10.449631@1] v4lvid: dbg: v4lvideo open [ 10.449762@1] v4lvid: dbg: vidioc_close!!!! [ 10.459656@0] v4lvid: dbg: v4lvideo open [ 10.459764@0] v4lvid: dbg: vidioc_close!!!! [ 10.470010@0] v4lvid: dbg: v4lvideo open [ 10.470138@0] v4lvid: dbg: vidioc_close!!!! [ 10.480719@0] v4lvid: dbg: v4lvideo open [ 10.481009@0] v4lvid: dbg: vidioc_close!!!! [ 10.483728@0] EXT4-fs (dm-1): mounted filesystem without journal. Opts: (null) [ 10.489275@3] v4lvid: dbg: v4lvideo open [ 10.489405@3] v4lvid: dbg: vidioc_close!!!! [ 10.499289@1] v4lvid: dbg: v4lvideo open [ 10.499401@1] v4lvid: dbg: vidioc_close!!!! [ 10.528696@2] v4lvid: dbg: v4lvideo open [ 10.528835@2] v4lvid: dbg: vidioc_close!!!! [ 10.588741@0] checking watermark status return 0xFFFFFFFF [ 10.588762@0] optee_armtz: initialized driver [ 10.726825@1] [dhd] _dhd_module_init: in Dongle Host Driver, version 101.10.591.33.20 (20230725-3)(gdbe2bd9) [ 10.726825@1] /home/portisch/CE/CoreELEC/build.CoreELEC-Amlogic-ne.aarch64-21/build/ap6xxx-aml-7a64f4c3f0435e56b8e02c7bff0a77f11d650089/bcmdhd.101.10.591.x compiled on Jan 19 2025 at 11:35:22 [ 10.726825@1] [ 10.726837@1] [dhd] ANDROID_VERSION = 11 [ 10.726924@1] [dhd] dhd_wlan_init_gpio: WL_HOST_WAKE=-1, oob_irq=72, oob_irq_flags=0x8 [ 10.726928@1] [dhd] dhd_wlan_init_gpio: WL_REG_ON=-1 [ 10.726932@1] [dhd] dhd_wifi_platform_load: Enter [ 10.726972@1] [dhd] Power-up adapter 'DHD generic adapter' [ 10.726979@1] [dhd] wifi_platform_set_power = 1, delay: 200 msec [ 10.726984@1] [dhd] ======== PULL WL_REG_ON(-1) HIGH! ======== [ 10.726998@1] aml_wifi aml_wifi: [extern_wifi_set_enable] WIFI Enable! 481 [ 10.933564@3] [dhd] wifi_platform_set_power = 1, sleep done: 200 msec [ 10.933581@3] [dhd] wifi_platform_bus_enumerate device present 1 [ 10.933585@3] [dhd] ======== Card detection to detect SDIO card! ======== [ 10.933590@3] sdio_reset_comm(): [ 10.938985@0] meson-gx-mmc fe088000.sdio: 5 [0x0], TIMEOUT[0x2800] [ 10.940127@0] meson-gx-mmc fe088000.sdio: 5 [0x0], TIMEOUT[0x2800] [ 10.941247@0] meson-gx-mmc fe088000.sdio: 5 [0x0], TIMEOUT[0x2800] [ 10.942262@0] meson-gx-mmc fe088000.sdio: 5 [0x0], TIMEOUT[0x2800] [ 10.942420@2] mmc2: Error resetting SDIO communications (-110) [ 10.942433@2] [sdio_reinit] finish [ 10.945840@2] [dhd] dummy_probe: enter [ 10.947074@2] [dhd] dummy_probe: enter [ 10.963439@1] [dhd] bcmsdh_register: register client driver [ 10.964591@1] [dhd] bcmsdh_sdmmc_probe: Enter num=1 [ 10.965780@1] [dhd] bcmsdh_sdmmc_probe: Enter num=2 [ 10.965793@1] [dhd] bus num (host idx)=2, slot num (rca)=1 [ 10.965798@1] [dhd] found adapter info 'DHD generic adapter' [ 10.965825@1] [dhd] succeed to alloc static buf [ 10.966849@1] [dhd] sdioh_attach: set sd_f2_blocksize 256 [ 10.967805@1] [dhd] sdioh_attach: sd clock rate = 400000 [ 10.977333@2] [dhd] F1 signature read @0x18000000=0x1042aae8 [ 10.992504@2] Bluetooth: bt_init: Core ver 2.22 [ 10.992779@2] NET: Registered protocol family 31 [ 11.087869@0] [dhd] F1 signature OK, socitype:0x1 chip:0xaae8 rev:0x2 pkg:0x4 [ 11.116895@3] [dhd] DHD: dongle ram size is set to 1310720(orig 1310720) at 0x170000 [ 11.118073@3] Wifi: bcmdhd_mem_prealloc: [dhd] STATIC-ERROR) bcmdhd_mem_prealloc : request DHD_INFO(42584) > 34816 [ 11.118088@3] [dhd] wifi_platform_prealloc: failed to alloc static mem section 7 [ 11.118128@3] [dhd] dhd_conf_set_chiprev : devid=0xaae7, chip=0xaae8, chiprev=2 [ 11.118137@3] [dhd] dhd_conf_disable_slpauto : dhd_slpauto = 1 [ 11.145628@2] [dhd] dhd_log_dump_init: kernel log buf size = 512KB; logdump_prsrv_tailsize = 80KB; limit prsrv tail size to = 76KB [ 11.147226@2] [dhd] dhd_attach(): thread:dhd_watchdog_thread:363 started [ 11.153584@1] [dhd] dhd_attach(): thread:dhd_dpc:364 started [ 11.154824@3] [dhd] dhd_dpc_thread: set dhd_dpc_prio 98 [ 11.169605@3] [dhd] dhd_attach(): thread:dhd_rxf:365 started [ 11.169630@3] [dhd] dhd_deferred_work_init: work queue initialized [ 11.169641@3] [dhd] dhd_tcpack_suppress_set: TCP ACK Suppress mode 0 -> mode 2 [ 11.169644@3] [dhd] dhd_tcpack_suppress_set: TCPACK_INFO_MAXNUM=40, TCPDATA_INFO_MAXNUM=40 [ 11.169714@3] [dhd] dhd_get_memdump_info: MEMDUMP ENABLED = 3 [ 11.169737@3] [dhd] sdioh_cis_read: func_cis_ptr[0]=0x1070 [ 11.416292@0] eee value: 0x6 [ 11.444846@0] [dhd] dhd_conf_get_otp : module_name=ap6398sv [ 11.445806@0] [dhd] dhdsdio_probe_init: making DHD_BUS_DOWN [ 11.449084@0] [dhd] Dongle Host Driver, version 101.10.591.33.20 (20230725-3)(gdbe2bd9) [ 11.449084@0] /home/portisch/CE/CoreELEC/build.CoreELEC-Amlogic-ne.aarch64-21/build/ap6xxx-aml-7a64f4c3f0435e56b8e02c7bff0a77f11d650089/bcmdhd.101.10.591.x compiled on Jan 19 2025 at 11:35:22 [ 11.449084@0] [ 11.522640@2] eee value: 0x0 [ 11.561588@2] meson8b-dwmac fdc00000.ethernet eth0: PHY [0.0:00] driver [MAE0621A Gigabit Ethernet] [ 11.573547@2] meson8b-dwmac fdc00000.ethernet eth0: No Safety Features support found [ 11.573572@2] meson8b-dwmac fdc00000.ethernet eth0: PTP not supported by HW [ 11.573583@2] meson8b-dwmac fdc00000.ethernet eth0: configuring for phy/rgmii link mode [ 11.609297@3] [dhd] Register interface [wlan0] MAC: 70:f7:54:c4:9b:25 [ 11.609297@3] [ 11.609905@0] [dhd] [wlan0] wl_android_wifi_off : g_wifi_on=1 force_off=1 [ 11.609935@0] [dhd] dhd_bus_devreset: == Power OFF == [ 11.611199@3] [dhd] dhd_open: WLAN driver is not initialized [ 11.616097@2] [dhd] dhd_bus_stop: making DHD_BUS_DOWN [ 11.616586@2] [dhd] bcmsdh_oob_intr_unregister: Enter [ 11.616594@2] [dhd] bcmsdh_oob_intr_unregister: irq is not registered [ 11.616609@2] [dhd] dhd_bus_devreset: making dhdpub up FALSE [ 11.616616@2] [dhd] dhd_txglom_enable: enable 0 [ 11.616621@2] [dhd] dhd_bus_devreset: making DHD_BUS_DOWN [ 11.617577@2] [dhd] wifi_platform_set_power = 0, delay: 0 msec [ 11.617591@2] [dhd] ======== PULL WL_REG_ON(-1) LOW! ======== [ 11.617614@2] aml_wifi aml_wifi: [extern_wifi_set_enable] WIFI Disable! 481 [ 11.617620@2] [dhd] [wlan0] wl_android_wifi_off : out [ 11.617752@2] [dhd] wl_android_post_init: 0 [ 11.617791@2] [dhd] _dhd_module_init: Exit err=0 [ 11.712106@2] BT_RADIO going: on [ 11.712119@2] AML_BT: going ON,btpower_evt=0 [ 11.712124@2] [off_def_power]: pid: 942 comm: rfkill [ 11.917522@0] [on_def_power]: pid: 942 comm: rfkill [ 12.637508@3] [dhd] [wlan0] dhd_open : Enter [ 12.637525@3] [dhd] Dongle Host Driver, version 101.10.591.33.20 (20230725-3)(gdbe2bd9) [ 12.637525@3] /home/portisch/CE/CoreELEC/build.CoreELEC-Amlogic-ne.aarch64-21/build/ap6xxx-aml-7a64f4c3f0435e56b8e02c7bff0a77f11d650089/bcmdhd.101.10.591.x compiled on Jan 19 2025 at 11:35:22 [ 12.637525@3] [ 12.637539@3] [dhd] dhd_open: ######### called for ifidx=0 ######### [ 12.637554@3] [dhd] [wlan0] wl_android_wifi_on : in g_wifi_on=0 [ 12.637559@3] [dhd] wifi_platform_set_power = 1, delay: 200 msec [ 12.637566@3] [dhd] ======== PULL WL_REG_ON(-1) HIGH! ======== [ 12.637587@3] aml_wifi aml_wifi: [extern_wifi_set_enable] WIFI Enable! 481 [ 12.845524@0] [dhd] wifi_platform_set_power = 1, sleep done: 200 msec [ 12.845547@0] [dhd] sdio_sw_reset: call mmc_sw_reset [ 12.846492@0] meson-gx-mmc fe088000.sdio: 52 [0xc00], TIMEOUT[0x2800] [ 12.847455@0] meson-gx-mmc fe088000.sdio: 52 [0x80000c08], TIMEOUT[0x2800] [ 12.853806@0] meson-gx-mmc fe088000.sdio: 52 [0xc00], TIMEOUT[0x2800] [ 12.854632@0] Bluetooth: hci_uart_init: HCI UART driver ver 2.3 [ 12.854664@0] Bluetooth: hci_uart_register_proto: HCI UART protocol H4 registered [ 12.854668@0] Bluetooth: hci_uart_register_proto: HCI UART protocol BCSP registered [ 12.854888@0] meson-gx-mmc fe088000.sdio: 52 [0x80000c08], TIMEOUT[0x2800] [ 12.855036@0] Bluetooth: hci_uart_register_proto: HCI UART protocol LL registered [ 12.855044@0] Bluetooth: hci_uart_register_proto: HCI UART protocol ATH3K registered [ 12.855109@0] Bluetooth: hci_uart_register_proto: HCI UART protocol Three-wire (H5) registered [ 12.855382@0] Bluetooth: hci_uart_register_proto: HCI UART protocol Intel registered [ 12.855640@0] Bluetooth: hci_uart_register_proto: HCI UART protocol Broadcom registered [ 12.855673@0] Bluetooth: hci_uart_register_proto: HCI UART protocol QCA registered [ 12.855677@0] Bluetooth: hci_uart_register_proto: HCI UART protocol AG6XX registered [ 12.855700@0] Bluetooth: hci_uart_register_proto: HCI UART protocol Marvell registered [ 12.864744@0] meson-gx-mmc fe088000.sdio: 8 [0x1aa], TIMEOUT[0x2800] [ 12.897297@2] mmc2: queuing unknown CIS tuple 0x80 (2 bytes) [ 12.899652@0] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) [ 12.901934@0] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) [ 12.906257@0] mmc2: queuing unknown CIS tuple 0x80 (7 bytes) [ 12.911170@0] mmc2: queuing unknown CIS tuple 0x8e (9 bytes) [ 13.013134@2] Data 1 aligned delay is 0 [ 13.013149@2] mmc2: clk 199999997 div 5 tuning start [ 13.015325@2] mmc2: adj_win: < 0 1 3 4 > [ 13.015335@2] mmc2: adj_win: < 0 1 3 4 > [ 13.015342@2] step:4, delay1:0x104104, delay2:0x4000000 [ 13.017504@2] mmc2: adj_win: < 0 1 3 4 > [ 13.017515@2] step:8, delay1:0x208208, delay2:0x8000000 [ 13.020080@2] mmc2: adj_win: < 0 1 2 3 4 > [ 13.020089@2] step:12, delay1:0x30c30c, delay2:0xc000000 [ 13.022432@2] mmc2: adj_win: < 0 1 2 4 > [ 13.022442@2] tuning-c:0, tuning-s:4 [ 13.022447@2] step:0, delay1:0x0, delay2:0x0 [ 13.022452@2] mmc2: clk= 0x10000205, adj = 0x2000, dly1 = 0, dly2 = 0 [ 13.022494@2] [dhd] sdioh_start: set sd_f2_blocksize 256 [ 13.022675@2] [dhd] dhd_bus_devreset: == Power ON == [ 13.022740@2] [dhd] F1 signature read @0x18000000=0x1042aae8 [ 13.025108@2] [dhd] F1 signature OK, socitype:0x1 chip:0xaae8 rev:0x2 pkg:0x4 [ 13.025637@2] [dhd] DHD: dongle ram size is set to 1310720(orig 1310720) at 0x170000 [ 13.025679@2] [dhd] dhd_bus_devreset: making DHD_BUS_DOWN [ 13.025710@2] [dhd] dhdsdio_probe_init: making DHD_BUS_DOWN [ 13.025807@2] [dhd] dhd_conf_disable_slpauto : dhd_slpauto = 1 [ 13.025883@2] [dhd] dhd_os_open_image1: /usr/lib/firmware/brcm/config.txt (507 bytes) open success [ 13.035205@2] [dhd] dhd_conf_read_country : ccode = SG [ 13.035249@2] [dhd] dhd_conf_read_others : bcn_timeout = 20 [ 13.035264@2] [dhd] dhd_conf_read_pm_params : PM = 0 [ 13.035312@2] [dhd] dhd_conf_read_nv_by_chip : nv_by_chip_count=16 [ 13.035318@2] [dhd] dhd_conf_read_nv_by_chip : chip=0xa962, chiprev=0, name=nvram_ap6181.txt [ 13.035323@2] [dhd] dhd_conf_read_nv_by_chip : chip=0xa962, chiprev=1, name=nvram_ap6210.txt [ 13.035327@2] [dhd] dhd_conf_read_nv_by_chip : chip=0xa9a6, chiprev=0, name=nvram_ap6212.txt [ 13.035331@2] [dhd] dhd_conf_read_nv_by_chip : chip=0xa9a6, chiprev=1, name=nvram_ap6212a.txt [ 13.035335@2] [dhd] dhd_conf_read_nv_by_chip : chip=0xa9a6, chiprev=2, name=nvram_ap6236.txt [ 13.035340@2] [dhd] dhd_conf_read_nv_by_chip : chip=0x4345, chiprev=6, name=nvram_ap6255.txt [ 13.035344@2] [dhd] dhd_conf_read_nv_by_chip : chip=0x4345, chiprev=9, name=nvram_ap6256.txt [ 13.035349@2] [dhd] dhd_conf_read_nv_by_chip : chip=0x4330, chiprev=4, name=nvram_ap6330.txt [ 13.035353@2] [dhd] dhd_conf_read_nv_by_chip : chip=0x4339, chiprev=1, name=nvram_ap6335.txt [ 13.035358@2] [dhd] dhd_conf_read_nv_by_chip : chip=0x4354, chiprev=1, name=nvram_ap6354.txt [ 13.035362@2] [dhd] dhd_conf_read_nv_by_chip : chip=0x4354, chiprev=2, name=nvram_ap6356.txt [ 13.035367@2] [dhd] dhd_conf_read_nv_by_chip : chip=0x4335, chiprev=1, name=nvram_bcm4335.txt [ 13.035371@2] [dhd] dhd_conf_read_nv_by_chip : chip=0xa94c, chiprev=2, name=nvram_ap6234.txt [ 13.035376@2] [dhd] dhd_conf_read_nv_by_chip : chip=0x4359, chiprev=9, name=nvram_ap6359s.txt [ 13.035380@2] [dhd] dhd_conf_read_nv_by_chip : chip=0x4334, chiprev=3, name=nvram_bcm4334.txt [ 13.035384@2] [dhd] dhd_conf_read_nv_by_chip : chip=0xaae8, chiprev=2, name=nvram_ap6275s.txt [ 13.035407@2] [dhd] dhd_conf_set_path_params : Final fw_path=/usr/lib/firmware/brcm/fw_bcm4359c51a2_ag.bin [ 13.035412@2] [dhd] dhd_conf_set_path_params : Final nv_path=/usr/lib/firmware/brcm/nvram_ap6275s.txt [ 13.035416@2] [dhd] dhd_conf_set_path_params : Final clm_path=/usr/lib/firmware/brcm/clm_bcm4359c51a2_ag.blob [ 13.035420@2] [dhd] dhd_conf_set_path_params : Final conf_path=/usr/lib/firmware/brcm/config.txt [ 13.036029@2] [dhd] dhd_os_open_image1: /usr/lib/firmware/brcm/fw_bcm4359c51a2_ag.bin (784096 bytes) open success [ 13.044743@2] [dhd] dhd_os_open_image1: /usr/lib/firmware/brcm/fw_bcm4359c51a2_ag.bin (784096 bytes) open success [ 13.044762@2] [dhd] dhdsdio_download_code_file Using SINGLE image (size 784096) [ 13.107324@2] [dhd] dhd_os_open_image1: /usr/lib/firmware/brcm/nvram_ap6275s.txt (8361 bytes) open success [ 13.117369@3] [dhd] # AP6275S_NVRAM_V1.2.1_20200311 [ 13.118048@3] [dhd] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. [ 13.178696@3] [dhd] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) [ 13.178926@3] [dhd] bcmsdh_oob_intr_register: HW_OOB irq=72 flags=0x8 [ 13.178982@3] [dhd] bcmsdh_oob_intr_register: disable_irq_wake [ 13.179114@3] [dhd] dhd_get_memdump_info: MEMDUMP ENABLED = 3 [ 13.179657@3] [dhd] dhd_dpc_thread: set dhd_dpc_prio 98 [ 13.180784@3] [dhd] wlc_ver_major 12, wlc_ver_minor 1 [ 13.180796@3] [dhd] dhd_tcpack_suppress_set: TCP ACK Suppress mode 2 -> mode 1 [ 13.180799@3] [dhd] dhd_tcpack_suppress_set: TCPACK_INFO_MAXNUM=40, TCPDATA_INFO_MAXNUM=40 [ 13.181980@3] [dhd] dhd_legacy_preinit_ioctls: use firmware generated mac_address 70:f7:54:c4:9b:25 [ 13.182063@3] [dhd] dhd_os_open_image1: /usr/lib/firmware/brcm/clm_bcm4359c51a2_ag.blob (29225 bytes) open success [ 13.182507@2] [dhd] dhd_check_current_clm_data: ----- This FW is not included CLM data ----- [ 13.211062@2] [dhd] dhd_apply_default_clm: CLM download succeeded [ 13.211581@2] [dhd] dhd_check_current_clm_data: ----- This FW is included CLM data ----- [ 13.213600@2] [dhd] Firmware up: op_mode=0x0005, MAC=70:f7:54:c4:9b:25 [ 13.218498@2] [dhd] dhd_legacy_preinit_ioctls: event_log_max_sets: 26 ret: 0 [ 13.221383@2] [dhd] arp_enable:1 arp_ol:0 [ 13.225064@2] [dhd] Driver: 101.10.591.33.20 (20230725-3) [ 13.225064@2] [dhd] Firmware: wl0: Apr 21 2021 17:10:21 version 18.35.387.23.44 (eba1da3@SYNA) (wlan=r880297) FWID 01-ce0cac2c [ 13.225064@2] [dhd] CLM: 9.9.8_SS (2021-05-10 15:05:58) [ 13.225218@2] [dhd] dhd_txglom_enable: enable 1 [ 13.225223@2] [dhd] dhd_conf_set_txglom_params : txglom_mode=copy [ 13.225227@2] [dhd] dhd_conf_set_txglom_params : txglomsize=36, deferred_tx_len=0 [ 13.225230@2] [dhd] dhd_conf_set_txglom_params : txinrx_thres=128, dhd_txminmax=-1 [ 13.225234@2] [dhd] dhd_conf_set_txglom_params : tx_max_offset=0, txctl_tmo_fix=300 [ 13.225241@2] [dhd] dhd_conf_get_disable_proptx : fw_proptx=1, disable_proptx=-1 [ 13.227369@2] [dhd] dhd_wlfc_hostreorder_init(): successful bdcv2 tlv signaling, 64 [ 13.228793@2] [dhd] dhd_pno_init: Support Android Location Service [ 13.229400@2] [dhd] rtt_do_get_ioctl: failed to send getbuf proxd iovar (CMD ID : 1), status=-23 [ 13.229408@2] [dhd] dhd_rtt_init : FTM is not supported [ 13.229413@2] [dhd] dhd_rtt_init EXIT, err = 0 [ 13.250652@2] [dhd] dhd_ecounter_autoconfig Ecounter autoconfig in FW not supported [ 13.251266@2] [dhd] failed to start ecounters [ 13.251272@2] [dhd] dhd_ecounter_configure Ecounters start failed [ 13.251430@2] [dhd] dhd_legacy_preinit_ioctls: d3_hostwake_delay IOVAR not present, proceed [ 13.276027@3] [dhd] CFG80211-ERROR) wl_cfg80211_event : Event handler is not created (WLC_E_ALLOW_CREDIT_BORROW) [ 13.277799@2] [dhd] dhd_conf_set_country : set country SG, revision 0 [ 13.281706@3] [dhd] dhd_conf_set_country : Country code: SG (SG/0) [ 13.291071@3] [dhd] [wlan0] wl_android_wifi_on : Success [ 13.324251@0] [dhd] CFG80211-ERROR) __wl_update_wiphybands : error get bw_cap 6g (-13) [ 13.356918@0] [dhd] [wlan0] wl_cfg80211_up : Roam channel cache enabled [ 13.358575@0] [dhd] [wlan0] dhd_open : Exit ret=0 [ 13.358585@0] [dhd] [wlan0] dhd_pri_open : tx queue started [ 13.471472@3] [dhd] [wlan0] wl_run_escan : LEGACY_SCAN sync ID: 0, bssidx: 0 [ 15.677530@3] [TEE] E/TA: MM-module-name:Video firmware TA,Version:1.0.2-g696054d(build:4422) [ 15.677546@3] [TEE] E/TA: fw_check_pack_version:290 the package has 97 fws totally. [ 15.677550@3] [TEE] E/TA: fw_check_pack_version:307 The TA ver is v1.0 [ 15.677553@3] [TEE] E/TA: fw_check_pack_version:308 The fw ver is v0.3 [ 15.677556@3] [TEE] E/TA: fw_data_insert:387 the fw with 408 KB will be loaded. [ 15.677560@3] [TEE] M/TA: TEE_Video_Load_FW success [ 15.702029@1] EXT4-fs (dm-3): mounted filesystem without journal. Opts: (null) [ 15.711781@0] meson8b-dwmac fdc00000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 15.711825@0] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 15.723134@3] 8021q: 802.1Q VLAN Support v1.8 [ 15.779167@2] No find node. [ 15.779185@2] get dos device failed, id 50(0), try to search dos device data [ 15.779190@2] dos_device_search_data, get major 28 dos dev data success [ 15.779193@2] dos init chip 50(0), device info : [ 15.779196@2] max_vdec_clock : 800 MHz [ 15.779199@2] max_hevcf_clock : 800 MHz [ 15.779202@2] max_hevcb_clock : 800 MHz [ 15.779205@2] hw_esparser_support : no [ 15.779208@2] vdec_canvas_support : no [ 15.779210@2] initial_dos_device end [ 15.779219@2] register clk_set_setting cpu[50] [ 15.780915@2] Registered firmware driver success. [ 15.782005@2] Try to load video/h264_enc.bin ... [ 15.782131@2] firmware_codec firmware_vdec: Direct firmware load for video/h264_enc.bin failed with error -2 [ 15.782141@2] Error : -2 can't load the video/h264_enc.bin. [ 15.782144@2] get data from fsys fail. [ 15.782147@2] invalid file type. [ 15.782482@2] Try to load video/video_ucode.bin ... [ 15.785379@2] load firmware size : 1951232, Name : video/video_ucode.bin. [ 15.789445@2] parse_ucode_version, ucode = 0.3.31 [ 15.805699@2] power domain: name: pwrc-vdec, dev: ffffff8024525000, link: ffffff8024609000 [ 15.805812@2] power domain: name: pwrc-hcodec, dev: ffffff8024525c00, link: ffffff80272bd000 [ 15.805822@2] vdec vdec: Get pwrc-vdec-2 failed, pm-domain: 0 [ 15.805916@2] power domain: name: pwrc-hevc, dev: ffffff8024528400, link: ffffff802452a000 [ 15.805922@2] vdec vdec: Get pwrc-hevcb failed, pm-domain: 0 [ 15.805927@2] vdec vdec: Get pwrc-wave failed, pm-domain: 0 [ 15.805931@2] vdec power init success! [ 15.814083@2] Amlogic A/V streaming port init [ 15.815644@2] no need to register_tync_func. [ 15.815654@2] no need to register_tync_func. [ 15.815657@2] no need to register_tync_func. [ 15.815660@2] no need to register_tync_func. [ 15.815662@2] no need to register_tync_func. [ 15.815665@2] no need to register_tync_func. [ 15.815667@2] no need to register_tync_func. [ 15.815670@2] no need to register_tync_func. [ 15.815673@2] no need to register_tync_func. [ 15.815689@2] get gate demux control failed 0000000000000000 [ 15.815695@2] get gate parser_top control failed 0000000000000000 [ 15.815709@2] get gate vdec control ok ffffff8026c38e00 [ 15.815714@2] get gate clk_81 control failed 0000000000000000 [ 15.815721@2] get gate clk_vdec_mux control ok ffffff8026c38f00 [ 15.815731@2] get gate clk_hcodec_mux control ok ffffff8024bb4000 [ 15.815736@2] get gate clk_hevc_mux control failed 0000000000000000 [ 15.815743@2] get gate clk_hevcb_mux control ok ffffff8024bb4100 [ 15.815748@2] get gate ahbarb0 control failed 0000000000000000 [ 15.815752@2] get gate asyncfifo control failed 0000000000000000 [ 15.815759@2] get gate clk_hevcf_mux control ok ffffff8024bb4200 [ 15.815763@2] get mux clk err. [ 15.815766@2] get mux clk err. [ 15.815769@2] get mux clk err. [ 15.815772@2] get mux clk err. [ 15.815774@2] get mux clk err. [ 15.815777@2] get mux clk err. [ 15.843481@2] v4l dec module init [ 15.844160@2] aml-vcodec-dec vcodec_dec: v4ldec registered as /dev/video26 [ 15.853548@2] [0]: vcodec_dec decoder ffffff8026198000 [ 15.853843@2] [0]: release decoder ffffff8026198000 [ 15.854257@2] [0]: v4ldec has been destroyed. [ 15.857968@3] amvdec_avs module init [ 15.879780@2] amvdec_avs3_driver_init_module bufspec_index = 2 [ 15.899705@0] amvdec_h264 module init [ 15.913409@1] ammvdec_h264 module init [ 15.922559@1] amvdec_h265 module init [ 15.946185@2] ammvdec_mpeg12 module init [ 15.957987@1] ammvdec_mpeg4_driver_init_module [ 15.967541@3] amvdec_vc1 module init [ 15.978693@3] amvdec_av1 module init [ 15.989049@3] amvdec_vp9 module init [ 16.000281@3] amvdec_vp9 module init [ 16.014856@1] amvdec_h265 module init [ 16.025409@1] amvdec_av1 module init [ 16.103332@1] Registered IR keymap rc-empty [ 16.103587@1] rc rc0: meson-ir as /devices/platform/fe084040.meson-ir/rc/rc0 [ 16.104145@3] rc rc0: lirc_dev: driver meson-ir registered at minor = 0, raw IR receiver, no transmitter [ 16.104372@3] input: meson-ir as /devices/platform/fe084040.meson-ir/rc/rc0/input4 [ 16.106944@0] meson-ir fe084040.meson-ir: receiver initialized [ 16.212193@1] IR NEC protocol handler initialized [ 16.233525@3] rc rc0: two consecutive events of type space [ 16.241071@0] IR RC6 protocol handler initialized [ 16.312143@3] input: eventlircd as /devices/virtual/input/input5 [ 21.054590@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 21.055669@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 21.056757@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 21.533851@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 21.534930@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 21.535976@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 22.541288@2] Not init audio effects [ 22.541770@2] audio_ddr_mngr: frddrs[0] registered by device fe330000.audiobus:tdm@1 [ 22.542979@2] audio_ddr_mngr: frddrs[0] released by device fe330000.audiobus:tdm@1 [ 22.556567@2] Not init audio effects [ 22.556756@2] audio_ddr_mngr: frddrs[0] registered by device fe330000.audiobus:tdm@1 [ 22.558319@2] audio_ddr_mngr: frddrs[0] released by device fe330000.audiobus:tdm@1 [ 22.559008@2] Not init audio effects [ 22.559198@2] audio_ddr_mngr: frddrs[0] registered by device fe330000.audiobus:i2s2hdmi [ 22.559997@2] audio_ddr_mngr: frddrs[0] released by device fe330000.audiobus:i2s2hdmi [ 22.561018@2] audio_ddr_mngr: frddrs[0] registered by device fe330000.audiobus:spdif@0 [ 22.561540@2] spdif_a keep clk continuous [ 22.561547@2] spdif_a keep clk continuous [ 22.561597@2] audio_ddr_mngr: frddrs[0] released by device fe330000.audiobus:spdif@0 [ 22.562482@2] audio_ddr_mngr: frddrs[0] registered by device fe330000.audiobus:spdif@1 [ 22.563427@2] spdif_b keep clk continuous [ 22.563434@2] spdif_b keep clk continuous [ 22.563486@2] audio_ddr_mngr: frddrs[0] released by device fe330000.audiobus:spdif@1 [ 22.582869@0] Not init audio effects [ 22.583048@0] audio_ddr_mngr: frddrs[0] registered by device fe330000.audiobus:i2s2hdmi [ 22.584353@0] master_mode(1), binv(1), finv(1) out_skew(2), in_skew(3) [ 22.584507@0] notify tdm to hdmitx,id 2 codec_type 0 [ 22.584515@0] hdmitx: hw: set audio [ 22.584520@0] hdmitx: hw: hdmitx audio_param->channel_num = 1, hdev->aud_output_ch = 33 [ 22.584535@0] hdmitx: fs = 3, cd = 6, tmds_clk = 148500 [ 22.584539@0] hdmitx: hw: aud_n_para = 6144 [ 22.584549@0] hdmitx: hw: set channel status [ 22.609439@0] hdmitx: hw: [0x10e3] = 0x1f [ 22.609474@0] hdmitx: audio: Audio Type: PCM [ 22.609484@0] iec_info: rate: 44100, codec_type:0x0, channel status L:0x100, R:0x100 [ 22.609491@0] hdmitx: hdmitx_notify_callback_a[6391] type:0 rate:44100 size:32 chs:2 fifo_rst:0 aud_src_if:1 [ 22.609495@0] hdmitx: hw: set audio [ 22.609498@0] hdmitx: hw: hdmitx audio_param->channel_num = 1, hdev->aud_output_ch = 33 [ 22.609512@0] hdmitx: fs = 2, cd = 6, tmds_clk = 148500 [ 22.609516@0] hdmitx: hw: aud_n_para = 6272 [ 22.609526@0] hdmitx: hw: set channel status [ 22.637426@0] hdmitx: hw: [0x10e3] = 0x1f [ 22.637458@0] hdmitx: audio: Audio Type: PCM [ 22.637462@0] hdmitx: audio: set audio param [ 22.637553@1] aml_T9015_audio_set_bias_level [ 22.637600@3] aml_T9015_audio_set_bias_level [ 22.637767@3] notify tdm to hdmitx,id 2 codec_type 0 [ 22.637778@3] iec_info: rate: 44100, codec_type:0x0, channel status L:0x100, R:0x100 [ 22.637785@3] hdmitx: hdmitx_notify_callback_a[6391] type:0 rate:44100 size:32 chs:2 fifo_rst:0 aud_src_if:1 [ 22.739934@0] audio_ddr_mngr: frddr stop success, fifo id 0, regbase:0x70, arb sts:0x40000010 [ 22.740060@0] notify tdm to hdmitx,id 2 codec_type 0 [ 22.740070@0] iec_info: rate: 44100, codec_type:0x0, channel status L:0x100, R:0x100 [ 22.740078@0] hdmitx: hdmitx_notify_callback_a[6391] type:0 rate:44100 size:32 chs:2 fifo_rst:0 aud_src_if:1 [ 25.409487@0] cec: CEC framework ctrl enabled [ 25.619712@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 25.620811@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 25.621912@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 25.870566@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 25.871643@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 25.872720@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 26.005927@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 26.007492@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 26.008595@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 26.014297@2] [dhd] [wlan0] wl_run_escan : LEGACY_SCAN sync ID: 1, bssidx: 0 [ 43.224832@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 43.225894@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 43.226930@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 43.584819@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 43.585911@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 43.587024@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 43.812754@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 43.813838@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 43.814906@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 43.964355@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 43.965421@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 43.966480@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 44.086077@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 44.087145@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 44.088191@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 44.337088@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 44.338153@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 44.339193@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 44.538470@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 44.539533@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 44.540569@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 45.549503@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 45.550577@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 45.551614@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 47.561448@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 47.562508@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 47.563543@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 48.652249@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 48.653330@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 48.654421@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 49.367793@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 49.368870@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 49.369925@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 53.003985@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 53.005358@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 53.006459@0] meson-gx-mmc fe088000.sdio: 52 [0x92003e01], TIMEOUT[0x2800] [ 53.013361@2] [dhd] [wlan0] wl_run_escan : LEGACY_SCAN sync ID: 2, bssidx: 0