CoreELEC Debug Information... +++++++++++++++++++ + /etc/os-release + +++++++++++++++++++ NAME="CoreELEC" VERSION="21.1.1-Omega" ID="coreelec" VERSION_ID="21.1.1" PRETTY_NAME="CoreELEC (official): 21.1.1-Omega" HOME_URL="https://coreelec.org" BUG_REPORT_URL="https://github.com/CoreELEC/CoreELEC" BUILD_ID="973e7567305a617dbe355f768e9d91e58815466e" LIBREELEC_ARCH="Amlogic-ne.aarch64" LIBREELEC_BUILD="official" LIBREELEC_PROJECT="Amlogic-ce" COREELEC_ARCH="Amlogic-ne.aarch64" COREELEC_BUILD="official" COREELEC_PROJECT="Amlogic-ce" COREELEC_DEVICE="Amlogic-ne" ++++++++++++++++++++++++++++++++++++ + /proc/device-tree/coreelec-dt-id + ++++++++++++++++++++++++++++++++++++ s4_s905w2_4g ++++++++++++++++++++++++++++++ + /proc/device-tree/le-dt-id + ++++++++++++++++++++++++++++++ Not Found! +++++++++++++++++ + /proc/cmdline + +++++++++++++++++ systemd.show_status=auto init=/init console=ttyS0,921600 no_console_suspend earlycon=aml-uart,0xfe07a000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 loop.max_part=4 loglevel=1 rootfstype=ramfs otg_device=0 logo=osd0,loaded,0x00300000 vout=1080p60hz,enable panel_type=lcd_1 hdmitx=,444,10bit hdmimode=1080p60hz hdr_policy=0 hdr_priority= frac_rate_policy=1 hdmi_read_edid= cvbsmode=576cvbs osd_reverse=0 video_reverse=0 irq_check_en=0 androidboot.selinux=permissive androidboot.firstboot=0 jtag=disable androidboot.bootloader=01.01.220328.173918 androidboot.hardware=ap201 androidboot.serialno=ap20180960d08501904 mac=90:0E:B3:67:52:AD androidboot.mac=90:0E:B3:67:52:AD androidboot.wificountrycode=US androidboot.rpmb_state=0xffff000c BOOT_IMAGE=kernel.img boot=LABEL=COREELEC disk=LABEL=STORAGE console=tty0 no_console_suspend keymap=us remotewakeup=0xffffffff decode_type=0 remotewakeupmask=0xffffffff vout=1080p60hz,dis logo=osd0,loaded,0x00300000 frac_rate_policy=0 hdmitx=, hdr_policy=1 hdr_priority=0 quiet root=/dev/mmcblk0p0 androidboot.verifiedbootstate=green ++++++++++++++++++++++++++++++ + /storage/.config/boot.hint + ++++++++++++++++++++++++++++++ UPDATE ++++++++++++++++++++++++++++++++ + /storage/.config/boot.status + ++++++++++++++++++++++++++++++++ OK +++++++++++++++++++ + /flash/boot.ini + +++++++++++++++++++ Not Found! +++++++++++++++++++++ + /flash/config.ini + +++++++++++++++++++++ #------------------------------------------------------------------------------------------------------ # # config.ini # #------------------------------------------------------------------------------------------------------ #------------------------------------------------------------------------------------------------------ # # Console Setup # # consoleopt='console=tty0 no_console_suspend' # #------------------------------------------------------------------------------------------------------ #------------------------------------------------------------------------------------------------------ # # CPU Frequency Control # # WARNING!!! WARNING!!! WARNING!!! # Before changing anything here please read the wiki entry at: # https://wiki.odroid.com/odroid-n2/application_note/software/set_cpu_freq # # max_freq_a73='1800' # max_freq_a53='1896' # #------------------------------------------------------------------------------------------------------ #------------------------------------------------------------------------------------------------------ # # HDMI CEC Control # Set by CoreELEC Settings # # cec_func_config='7f' # #------------------------------------------------------------------------------------------------------ #------------------------------------------------------------------------------------------------------ # # IR setup # Setup a custom keycode to wake the Amlogic device from suspend or poweroff # You can stop kodi and eventlircd and use "ir-keytable -u" to obtain a compatible u-boot # IR keycode # This setting will require a injected bl30 blob. # # remotewakeup='0x31ce4db2' # # decode_type can be one of the following: # NEC='0x0', RC5='0x4', RC6A='0x5', RC6='0xb' # This setting will require a injected bl30 blob. # # decode_type='0x0' # NEC # # remote power key mask: # Some IR protocols implement a toggle bit, this can be ignored by the "and" mask: # RC5='0x37ff', RC6='0x1effff', RC6A='0xffff7fff' # This setting will require a injected bl30 blob. # # remotewakeupmask='0xffffffff' # #------------------------------------------------------------------------------------------------------ #------------------------------------------------------------------------------------------------------ # # Power Off and Wake Up using GPIO Key Button # Define a gpio by string, like 'GPIOD_4' for Khadas VIM4 as example # This setting will require a injected bl30 blob. # # gpiopower='GPIOD_4' #------------------------------------------------------------------------------------------------------ #------------------------------------------------------------------------------------------------------ # # USB specific options # # usbopts='usb-xhci.tablesize=2' # #------------------------------------------------------------------------------------------------------ #------------------------------------------------------------------------------------------------------ # # USB Power Control # Set by CoreELEC Settings # # usbpower=0 # #------------------------------------------------------------------------------------------------------ #------------------------------------------------------------------------------------------------------ # # VOUT mode # You can use this setting to set a specific video mode at boot. # # vout='1080p60hz' # #------------------------------------------------------------------------------------------------------ #------------------------------------------------------------------------------------------------------ # # Fractional Refresh Rate # You can use this setting to set a fractional refresh rate. So for example if vout mode it set to # 1080p60hz then setting this to 1 will make the refresh rate switch to 59.97hz instead of the modes # default of 60hz. In this example setting it to 0 will keep the modes default of 60hz. # # frac_rate_policy='0' # #------------------------------------------------------------------------------------------------------ #------------------------------------------------------------------------------------------------------ # # Busybox console keyboard layout # Set by CoreELEC Settings # keymap='us' # #------------------------------------------------------------------------------------------------------ #------------------------------------------------------------------------------------------------------ # # CoreELEC Developer Options # Valid options are: textmode debugging progress nofsck nosplash noram overlay quiet ssh # # coreelec='quiet' # #------------------------------------------------------------------------------------------------------ ++++++++++++++++++ + /flash/dtb.xml + ++++++++++++++++++ default-on heartbeat rc-feedback mmc1 mmc0 none default-on heartbeat rc-feedback mmc1 mmc0 none default-on heartbeat rc-feedback mmc1 mmc0 none default-on none 1 255 2 3 4 5 6 8 2 0 1 0 ++++++++++++++++++ + /flash/cfgload + ++++++++++++++++++ echo "Using device ${device}, number ${devnr}, partition ${partnr}, CoreELEC on eMMC: ${ce_on_emmc}" setenv remotewakeup "0xffffffff" setenv decode_type "0" setenv remotewakeupmask "0xffffffff" setenv coreelec "quiet" setenv vout "1080p60hz" setenv frac_rate_policy "0" setenv consoleopt "console=tty0 no_console_suspend" setenv rootopt "BOOT_IMAGE=kernel.img boot=LABEL=COREELEC disk=LABEL=STORAGE" if test "${ce_on_emmc}" = "yes"; then setenv rootopt "BOOT_IMAGE=kernel.img boot=LABEL=CE_FLASH disk=FOLDER=/dev/CE_STORAGE"; fi if fatload ${device} ${devnr}:${partnr} ${loadaddr} resolution.ini; then env import -t ${loadaddr} ${filesize}; fi if fatload ${device} ${devnr}:${partnr} ${loadaddr} config.ini; then env import -t ${loadaddr} ${filesize}; fi if test "${cec_func_config}" != ""; then setenv cec "hdmitx=cec${cec_func_config}"; fi if test "${gpiopower}" != ""; then setenv gpiopower "gpiopower=${gpiopower}"; fi setenv irsetup "remotewakeup=${remotewakeup} decode_type=${decode_type} remotewakeupmask=${remotewakeupmask}" if test "${kernel_hdmimode}" != ""; then setenv vout "${kernel_hdmimode}"; fi if test "${usbpower}" != ""; then setenv usbpower "enable_system_power=${usbpower}"; fi if test "${max_freq_a53}" != ""; then setenv max_freq_a53 "max_freq_a53=${max_freq_a53}"; fi if test "${max_freq_a73}" != ""; then setenv max_freq_a73 "max_freq_a73=${max_freq_a73}"; fi if test "${keymap}" != ""; then setenv consoleopt "${consoleopt} keymap=${keymap}"; fi if test "${wol}" != ""; then setenv wol "enable_wol=${wol}"; fi if test "${mac}" = "" && test "${ethaddr}" != ""; then setenv localmac "mac=${ethaddr}"; fi if test "${loadaddr_kernel}" != ""; then setenv loadaddr "${loadaddr_kernel}"; fi setenv displayopt "vout=${vout},dis logo=osd0,loaded,${fb_addr} frac_rate_policy=${frac_rate_policy} hdmitx=${hdmitx} hdr_policy=1 hdr_priority=0" setenv initargs "${rootopt} ${consoleopt} ${max_freq_a53} ${max_freq_a73} ${wol} ${localmac} ${cec} ${gpiopower} ${irsetup} ${usbpower} ${usbopts}" setenv bootargs "${bootargs} ${initargs} ${displayopt} ${coreelec}" fatload ${device} ${devnr}:${partnr} ${loadaddr} kernel.img fatload ${device} ${devnr}:${partnr} ${dtb_mem_addr} dtb.img bootm ${loadaddr} bootm start bootm loados bootm prep bootm go +++++++++++++++++++++++++ + /flash/aml_autoscript + +++++++++++++++++++++++++ defenv setenv bootfromnand 0 setenv upgrade_step 2 setenv ce_on_emmc "no" setenv sddtb 'if fatload mmc 0 ${dtb_mem_addr} dtb.img; then else store dtb read ${dtb_mem_addr}; fi' setenv usbdtb 'if fatload usb 0 ${dtb_mem_addr} dtb.img; then else store dtb read ${dtb_mem_addr}; fi' setenv cfgloadsd 'if fatload mmc 0:1 ${loadaddr} cfgload; then setenv device mmc; setenv devnr 0; setenv partnr 1; source ${loadaddr}; fi' setenv cfgloadusb 'if fatload usb 0:1 ${loadaddr} cfgload; then setenv device usb; setenv devnr 0; setenv partnr 1; source ${loadaddr}; fi' setenv cfgloademmc 'for p in 1 2 3 4 5 6 7 8 9 A B C D E F 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F; do if fatload mmc 1:${p} ${loadaddr} cfgload; then setenv device mmc; setenv devnr 1; setenv partnr ${p}; setenv ce_on_emmc "yes"; source ${loadaddr}; fi; done;' setenv bootfromsd 'if mmcinfo; then run cfgloadsd; if fatload mmc 0 ${loadaddr} kernel.img; then run sddtb; setenv bootargs ${bootargs} bootfromsd; bootm; fi; fi' setenv bootfromusb 'usb start 0; run cfgloadusb; if fatload usb 0 ${loadaddr} kernel.img; then run usbdtb; setenv bootargs ${bootargs} bootfromusb; bootm; fi' setenv bootfromemmc 'run cfgloademmc' setenv bootcmd 'if test ${bootfromnand} = 1; then setenv bootfromnand 0; saveenv; else run bootfromsd; run bootfromusb; run bootfromemmc; fi; run storeboot' saveenv run storeargs run bootfromsd run bootfromusb run bootfromemmc +++++++++++++++++++++++++++++++++ + /storage/.config/autostart.sh + +++++++++++++++++++++++++++++++++ Unset by user! ++++++++++++++++++++++++++++++ + /storage/init-previous.log + ++++++++++++++++++++++++++++++ UPDATE IN PROGRESS Please do not reboot or turn off your CoreELEC device! Found new .tar archive Extracting contents of archive... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/done Checking KERNEL.md5... |OK Checking SYSTEM.md5... |/-\OK Checking size: OK Updating from 21.0-Omega to 21.1.1-Omega Updating Kernel...  0% 13% 27% 36% 50% 63% 73% 86% 95%100% Updating System...  0% 1% 2% 3% 4% 5% 6% 7% 8% 10% 10% 12% 13% 14% 15% 16% 17% 18% 19% 20% 21% 22% 23% 24% 25% 27% 28% 29% 30% 31% 32% 33% 34% 35% 36% 37% 39% 40% 41% 42% 43% 44% 45% 46% 47% 48% 49% 51% 51% 53% 54% 55% 56% 57% 58% 59% 60% 61% 62% 63% 64% 65% 67% 67% 69% 70% 71% 72% 73% 74% 75% 76% 78% 78% 80% 81% 82% 83% 84% 85% 86% 87% 88% 89% 90% 92% 92% 94% 95% 96% 97% 98% 99%100% Updating Boot Files... Updating device tree with s4_s905w2_4g.dtb... Updating device_trees folder... Updating dtb.img by dtb.xml... Updating cfgload... Updating aml_autoscript... Boot Files Updated. Cleaning up... |/done +++++++++++++++ + fw_printenv + +++++++++++++++ 2160p60hz_deepcolor=420,10bit 2160p_h=2160 2160p_w=3840 2160p_x=0 2160p_y=0 EnableSelinux=permissive Irq_check_en=0 active_slot=_a aml_dt=s4_s905w2_ap201-4g arch=arm avb2=1 baudrate=115200 bcb_cmd=get_avb_mode;get_valid_slot;if test ${vendor_boot_mode} = true; then setenv loadaddr_kernel 0x3080000;setenv dtb_mem_addr 0x1000000;fi;if test ${active_slot} != normal; then echo ab mode, read dtb from kernel;setenv common_dtb_load imgread dtb ${boot_part} ${dtb_mem_addr};fi; board=ap201 board_logo_part=odm_ext board_name=s4_ap201 bootLogoPart=odm_ext_a boot_flag=2 boot_part=boot_a bootargs=init=/init console=ttyS0,921600 no_console_suspend earlycon=aml-uart,0xfe07a000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 loop.max_part=4 loglevel=1 rootfstype=ramfs otg_device=0 logo=osd0,loaded,0x00300000 vout=1080p60hz,enable panel_type=lcd_1 hdmitx=,444,10bit hdmimode=1080p60hz hdr_policy=0 hdr_priority= frac_rate_policy=1 hdmi_read_edid= cvbsmode=576cvbs osd_reverse=0 video_reverse=0 irq_check_en=0 androidboot.selinux=permissive androidboot.firstboot=0 jtag=disable androidboot.bootloader=01.01.220328.173918 androidboot.hardware=ap201 androidboot.serialno=ap20180960d08501904 mac=90:0E:B3:67:52:AD androidboot.mac=90:0E:B3:67:52:AD androidboot.wificountrycode=US bootcmd=if test ${bootfromnand} = 1; then setenv bootfromnand 0; saveenv; else run bootfromsd; run bootfromusb; run bootfromemmc; fi; run storeboot bootdelay=0 bootfromemmc=run cfgloademmc bootfromnand=0 bootfromsd=if mmcinfo; then run cfgloadsd; if fatload mmc 0 ${loadaddr} kernel.img; then run sddtb; setenv bootargs ${bootargs} bootfromsd; bootm; fi; fi bootfromusb=usb start 0; run cfgloadusb; if fatload usb 0 ${loadaddr} kernel.img; then run usbdtb; setenv bootargs ${bootargs} bootfromusb; bootm; fi bootloader_version=01.01.220328.173918 bootm_low=0 bootm_size=e0000000 bootup_offset=0x22d88 bootup_size=0x11d5f8 ce_on_emmc=no cfgloademmc=for p in 1 2 3 4 5 6 7 8 9 A B C D E F 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F; do if fatload mmc 1:${p} ${loadaddr} cfgload; then setenv device mmc; setenv devnr 1; setenv partnr ${p}; setenv ce_on_emmc "yes"; source ${loadaddr}; fi; done; cfgloadsd=if fatload mmc 0:1 ${loadaddr} cfgload; then setenv device mmc; setenv devnr 0; setenv partnr 1; source ${loadaddr}; fi cfgloadusb=if fatload usb 0:1 ${loadaddr} cfgload; then setenv device usb; setenv devnr 0; setenv partnr 1; source ${loadaddr}; fi check_result=succ cmdline_keys=setenv region_code US;if keyman init 0x1234; then if keyman read usid ${loadaddr} str; then setenv bootargs ${bootargs} androidboot.serialno=${usid};setenv serial ${usid}; setenv serial# ${usid};else setenv bootargs ${bootargs} androidboot.serialno=ap201${cpu_id};setenv serial ap201${cpu_id}; setenv serial# ap201${cpu_id};fi;if keyman read region_code ${loadaddr} str; then fi;if keyman read mac ${loadaddr} str; then setenv bootargs ${bootargs} mac=${mac} androidboot.mac=${mac};fi;if keyman read deviceid ${loadaddr} str; then setenv bootargs ${bootargs} androidboot.deviceid=${deviceid};fi;fi;setenv bootargs ${bootargs} androidboot.wificountrycode=${region_code};factory_provision init; colorattribute=444,10bit common_dtb_load=imgread dtb boot_a 0x1000000 cpu=armv8 cpu_id=80960d08501904 cvbs_drv=0 cvbsmode=576cvbs display_bpp=16 display_color_bg=0 display_color_fg=0xffff display_color_index=16 display_height=1080 display_layer=osd0 display_width=1920 dolby_status=0 dolby_vision_on=0 dtb_mem_addr=0x1000000 emmc_quirks=meson-gx-mmc.caps2_quirks="mmc-hs400" eth6addr=90:0e:b3:67:52:ad ext4LogoPath=/logo_files/bootup.bmp ext4logoLoadCmd=ext4load mmc 1:${logoPart} ${logoLoadAddr} ${ext4LogoPath} fatload_dev=usb fb_addr=0x00300000 fb_height=1080 fb_width=1920 fdt_high=0x20000000 fdtaddr=1000000 fdtcontroladdr=dff6cea0 firstboot=0 forUpgrade_1stBootIndex=0 forUpgrade_bootloaderCopies=3 forUpgrade_bootloaderIndex=0 forUpgrade_flashType=BOOT_EMMC forUpgrade_robustOta=true forUpgrade_secureBoot=false forUpgrade_socType=37 frac_rate_policy=1 fs_type=rootfstype=ramfs gatewayip=10.18.9.1 get_os_type=if store read ${os_ident_addr} ${boot_part} 0 0x1000; then os_ident ${os_ident_addr}; fi gpt_mode=false hdmi_colordepth=8 hdmi_colorspace=auto hdmichecksum=0xd64c0000 hdmimode=1080p60hz hdr_policy=0 hostname=arm_gxbb init_display=get_rebootmode;echo reboot_mode:::: ${reboot_mode};if test ${reboot_mode} = quiescent; then setenv reboot_mode_android quiescent;setenv dolby_status 0;setenv dolby_vision_on 0;run storeargs;setenv bootargs ${bootargs} androidboot.quiescent=1;osd open;osd clear;else if test ${reboot_mode} = recovery_quiescent; then setenv reboot_mode_android quiescent;setenv dolby_status 0;setenv dolby_vision_on 0;run storeargs;setenv bootargs ${bootargs} androidboot.quiescent=1;osd open;osd clear;else setenv reboot_mode_android normal;run storeargs;hdmitx hpd;hdmitx get_preferred_mode;hdmitx get_parse_edid;setenv dolby_status 0;setenv dolby_vision_on 0;watermark_init;osd open;osd clear;run load_bmp_logo;bmp scale;vout output ${outputmode};vpp hdrpkt;fi;fi; initargs=init=/init console=ttyS0,921600 no_console_suspend earlycon=aml-uart,0xfe07a000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 loop.max_part=4 initrd_high=df800000 ipaddr=10.18.9.97 jtag=disable load_bmp_logo=if rdext4pic ${board_logo_part} $loadaddr; then bmp display $logoLoadAddr; else if imgread pic logo bootup $loadaddr; then bmp display $bootup_offset; fi; fi; loadaddr=0x00020000 loadaddr_kernel=0x3080000 loadaddr_rtos=0x00001000 lock=10101000 loglevel=1 logoLoadAddr=20000 logoPart=f mac=90:0E:B3:67:52:AD netmask=255.255.255.0 os_ident_addr=0x00500000 osd_reverse=0 otg_device=0 outputmode=1080p60hz panel_type=lcd_1 partiton_mode=dynamic preboot=run bcb_cmd; run upgrade_check;run init_display;run storeargs;run upgrade_key;bcb uboot-command;run switch_bootmode; reboot_mode=normal reboot_mode_android=normal reboot_status=reboot_init recovery_from_fat_dev=setenv loadaddr ${loadaddr_kernel};if fatload ${fatload_dev} 0 ${loadaddr} aml_autoscript; then autoscr ${loadaddr}; fi;if fatload ${fatload_dev} 0 ${loadaddr} recovery.img; then if fatload ${fatload_dev} 0 ${dtb_mem_addr} dtb.img; then echo ${fatload_dev} dtb.img loaded; fi;setenv bootargs ${bootargs} ${fs_type};bootm ${loadaddr};fi; recovery_from_flash=echo active_slot: ${active_slot};setenv loadaddr ${loadaddr_kernel};if test ${active_slot} = normal; then setenv bootargs ${bootargs} ${fs_type} aml_dt=${aml_dt} recovery_part=${recovery_part} recovery_offset=${recovery_offset};if test ${upgrade_step} = 3; then if ext4load mmc 1:2 ${dtb_mem_addr} /recovery/dtb.img; then echo cache dtb.img loaded; fi;if test ${vendor_boot_mode} = true; then if imgread kernel ${recovery_part} ${loadaddr} ${recovery_offset}; then bootm ${loadaddr}; fi;else if ext4load mmc 1:2 ${loadaddr} /recovery/recovery.img; then echo cache recovery.img loaded; wipeisb; bootm ${loadaddr}; fi;fi;else if imgread dtb recovery ${dtb_mem_addr}; then else echo restore dtb; run common_dtb_load;fi;fi;if imgread kernel ${recovery_part} ${loadaddr} ${recovery_offset}; then bootm ${loadaddr}; fi;else if fdt addr ${dtb_mem_addr}; then else echo retry common dtb; run common_dtb_load; fi;if test ${partiton_mode} = normal; then setenv bootargs ${bootargs} ${fs_type} aml_dt=${aml_dt} recovery_part=${boot_part} recovery_offset=${recovery_offset};if imgread kernel ${boot_part} ${loadaddr}; then bootm ${loadaddr}; fi;else if test ${vendor_boot_mode} = true; then setenv bootargs ${bootargs} ${fs_type} aml_dt=${aml_dt} recovery_part=${boot_part} recovery_offset=${recovery_offset} androidboot.slot_suffix=${active_slot};if imgread kernel ${boot_part} ${loadaddr}; then bootm ${loadaddr}; fi;else setenv bootargs ${bootargs} ${fs_type} aml_dt=${aml_dt} recovery_part=${recovery_part} recovery_offset=${recovery_offset} androidboot.slot_suffix=${active_slot};if imgread kernel ${recovery_part} ${loadaddr} ${recovery_offset}; then wipeisb; bootm ${loadaddr}; fi;fi;fi;fi; recovery_from_sdcard=setenv fatload_dev mmc;if mmcinfo; then run recovery_from_fat_dev; fi; recovery_from_udisk=setenv fatload_dev usb;if usb start 0; then run recovery_from_fat_dev; fi; recovery_offset=0 recovery_part=recovery_a region_code=US rpmb_state=1 sdcburncfg=aml_sdc_burn.ini sddtb=if fatload mmc 0 ${dtb_mem_addr} dtb.img; then else store dtb read ${dtb_mem_addr}; fi serial=ap20180960d08501904 serial#=ap20180960d08501904 serverip=10.18.9.113 silent=1 slot-suffixes=0 soc=s4 stderr=serial@a000 stdin=serial@a000 stdout=serial@a000 storage_param=setenv bootargs ${bootargs} ${emmc_quirks}; store param;setenv bootargs ${bootargs} ${mtdbootparts}; storeargs=get_bootloaderversion;setenv bootargs ${initargs} loglevel=${loglevel} ${fs_type} otg_device=${otg_device} logo=${display_layer},loaded,${fb_addr} vout=${outputmode},enable panel_type=${panel_type} hdmitx=${cecconfig},${colorattribute} hdmimode=${hdmimode} hdr_policy=${hdr_policy} hdr_priority=${hdr_priority} frac_rate_policy=${frac_rate_policy} hdmi_read_edid=${hdmi_read_edid} cvbsmode=${cvbsmode} osd_reverse=${osd_reverse} video_reverse=${video_reverse} irq_check_en=${Irq_check_en} androidboot.selinux=${EnableSelinux} androidboot.firstboot=${firstboot} jtag=${jtag}; setenv bootargs ${bootargs} androidboot.bootloader=${bootloader_version} androidboot.hardware=ap201;run cmdline_keys; storeboot=run get_os_type;run storage_param;if test ${os_type} = rtos; then setenv loadaddr ${loadaddr_rtos};store read ${loadaddr} ${boot_part} 0 0x400000;bootm ${loadaddr};else if test ${os_type} = kernel; then get_system_as_root_mode;echo system_mode in storeboot: ${system_mode};get_avb_mode;echo active_slot in storeboot: ${active_slot};if test ${system_mode} = 1; then setenv bootargs ${bootargs} ro rootwait skip_initramfs;else setenv bootargs ${bootargs} androidboot.force_normal_boot=1;fi;if test ${active_slot} != normal; then setenv bootargs ${bootargs} androidboot.slot_suffix=${active_slot};fi;if fdt addr ${dtb_mem_addr}; then else echo retry common dtb; run common_dtb_load; fi;setenv loadaddr ${loadaddr_kernel};if imgread kernel ${boot_part} ${loadaddr}; then bootm ${loadaddr}; fi;else echo wrong OS format ${os_type}; fi;fi;echo try upgrade as booting failure; run update; switch_bootmode=get_rebootmode;if test ${reboot_mode} = factory_reset; then run recovery_from_flash;else if test ${reboot_mode} = update; then run update;else if test ${reboot_mode} = quiescent; then setenv bootargs ${bootargs} androidboot.quiescent=1;else if test ${reboot_mode} = recovery_quiescent; then setenv bootargs ${bootargs} androidboot.quiescent=1;run recovery_from_flash;else if test ${reboot_mode} = cold_boot; then run usb_burning;else if test ${reboot_mode} = fastboot; then fastboot 0;fi;fi;fi;fi;fi;fi; update=run usb_burning; run recovery_from_sdcard;run recovery_from_udisk;run recovery_from_flash; upgrade_check=echo recovery_status=${recovery_status};if itest.s "${recovery_status}" == "in_progress"; then run storeargs; run recovery_from_flash;else fi;echo upgrade_step=${upgrade_step}; if itest ${upgrade_step} == 3; then run storeargs; run update; fi; upgrade_key=if gpio input GPIOD_3; then echo detect upgrade key;if test ${boot_flag} = 0; then echo enter fastboot; setenv boot_flag 1; saveenv; fastboot 0;else if test ${boot_flag} = 1; then echo enter update; setenv boot_flag 2; saveenv; run update;else echo enter recovery; setenv boot_flag 0; saveenv; run recovery_from_flash;fi;fi;fi; upgrade_step=2 usb_burning=adnl 1200 usbdtb=if fatload usb 0 ${dtb_mem_addr} dtb.img; then else store dtb read ${dtb_mem_addr}; fi vendor=amlogic vendor_boot_mode=true vendor_boot_part=vendor_boot video_reverse=0 vout_init=enable +++++++++ + lsmod + +++++++++ Module Size Used by ir_nec_decoder 20480 0 meson_ir 16384 0 rc_core 53248 3 ir_nec_decoder,meson_ir amvdec_avs2_fb 307200 0 amvdec_av1_fb 217088 0 amvdec_h265_fb 229376 0 amvdec_vp9_fb 172032 0 amvdec_vp9 135168 0 amvdec_av1 151552 0 amvdec_vc1 90112 0 amvdec_mmpeg4 40960 0 amvdec_mpeg4 86016 0 amvdec_mmpeg12 57344 0 amvdec_mpeg12 147456 0 amvdec_mmjpeg 28672 0 amvdec_mjpeg 49152 0 amvdec_h265 151552 0 amvdec_mh264 167936 0 amvdec_h264mvc 69632 0 amvdec_h264 180224 0 amvdec_mavs 57344 0 amvdec_avs3 356352 0 amvdec_avs2 225280 0 amvdec_avs 94208 0 amvdec_ports 249856 0 stream_input 172032 14 amvdec_mh264,amvdec_av1_fb,amvdec_h265,amvdec_mavs,amvdec_ports,amvdec_avs3,amvdec_avs,amvdec_avs2_fb,amvdec_h265_fb,amvdec_vp9_fb,amvdec_mpeg12,amvdec_mmpeg12,amvdec_h264,amvdec_avs2 decoder_common 323584 23 amvdec_mjpeg,amvdec_av1,amvdec_mh264,amvdec_av1_fb,amvdec_vp9,amvdec_mmpeg4,amvdec_h265,amvdec_mavs,amvdec_ports,amvdec_avs3,amvdec_mmjpeg,amvdec_avs,amvdec_avs2_fb,amvdec_vc1,amvdec_h265_fb,stream_input,amvdec_vp9_fb,amvdec_mpeg12,amvdec_mmpeg12,amvdec_h264,amvdec_h264mvc,amvdec_avs2,amvdec_mpeg4 firmware 24576 23 amvdec_mjpeg,amvdec_av1,amvdec_mh264,amvdec_av1_fb,amvdec_vp9,amvdec_mmpeg4,amvdec_h265,amvdec_mavs,amvdec_avs3,amvdec_mmjpeg,amvdec_avs,amvdec_avs2_fb,amvdec_vc1,amvdec_h265_fb,stream_input,amvdec_vp9_fb,decoder_common,amvdec_mpeg12,amvdec_mmpeg12,amvdec_h264,amvdec_h264mvc,amvdec_avs2,amvdec_mpeg4 media_clock 49152 25 amvdec_mjpeg,amvdec_av1,amvdec_mh264,amvdec_av1_fb,amvdec_vp9,amvdec_mmpeg4,amvdec_h265,amvdec_mavs,amvdec_ports,amvdec_avs3,amvdec_mmjpeg,amvdec_avs,amvdec_avs2_fb,amvdec_vc1,amvdec_h265_fb,stream_input,firmware,amvdec_vp9_fb,decoder_common,amvdec_mpeg12,amvdec_mmpeg12,amvdec_h264,amvdec_h264mvc,amvdec_avs2,amvdec_mpeg4 joydev 32768 0 aic8800_bsp 86016 0 iptable_nat 16384 0 nf_nat 45056 1 iptable_nat optee_armtz 32768 1 optee 57344 2 optee_armtz iptable_filter 16384 0 bluetooth 483328 6 dm_mod 147456 12 mali_kbase 688128 3 nfsd 397312 5 nfs_acl 16384 1 nfsd vlsicomm 1683456 0 aml_sdio 28672 1 vlsicomm wifi_dummy 16384 0 +++++++++ + lsusb + +++++++++ Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 0781:5567 SanDisk Corp. Cruzer Blade Bus 001 Device 003: ID 2717:5055 Xiaomi Inc. Xiaomi Wireless Keyboard and Mouse Combo 2 Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub CoreELEC Display Information... ++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/edid + ++++++++++++++++++++++++++++++++++++++++++++++++ Rx Manufacturer Name: RTK Rx Product Code: 8b8a Rx Serial Number: 01010101 Rx Product Name: RTK Manufacture Week: 48 Manufacture Year: 2023 Physcial size(mm): 390 x 240 EDID Version: 1.3 EDID block number: 0x1 blk0 chksum: 0xd6 Source Physical Address[a.b.c.d]: 1.0.0.0 native Mode f2, VIC (native 0): ColorDeepSupport 38 4 16 4 Audio {format, channel, freq, cce} {1, 1, 7f, 7} Speaker Allocation: 1 Vendor: 0xc03 ( HDMI device) MaxTMDSClock1 680 MHz Vendor2: 0xc45dd8 MaxTMDSClock2 680 MHz vLatency: Invalid/Unknown aLatency: Invalid/Unknown i_vLatency: Invalid/Unknown i_aLatency: Invalid/Unknown ColorMetry: 0xc0 SCDC: 1 RR_Cap: 0 LTE_340M_Scramble: 0 HDR/5 DeepColor checkvalue: 0xd64c0000 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/edid_parsing + ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ok +++++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/rawedid + +++++++++++++++++++++++++++++++++++++++++++++++++++ 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 ++++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/config + ++++++++++++++++++++++++++++++++++++++++++++++++++ cur_VIC: 16 cur_video_param->VIC=16 VIC: 16 1920x1080p60hz Colour depth: 12-bit Colourspace: YUV444 Colour range: default EOTF: SDR YCC colour range: limited Colourimetry: BT.709 PLL clock: 0xdb1404b9, Vid clock div 0x000a78f0 audio config: on audio on/off: on audio source: I2S audio type: L-PCM audio channel num: 2 channels audio sample rate: 44.1kHz audio sample size: MAX 3D config: off ++++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/dc_cap + ++++++++++++++++++++++++++++++++++++++++++++++++++ 420,10bit 444,12bit 444,10bit 444,8bit 422,12bit 422,10bit 422,8bit rgb,12bit rgb,10bit rgb,8bit ++++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/dv_cap + ++++++++++++++++++++++++++++++++++++++++++++++++++ The Rx don't support DolbyVision ++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/attr + ++++++++++++++++++++++++++++++++++++++++++++++++ , ++++++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/disp_cap + ++++++++++++++++++++++++++++++++++++++++++++++++++++ 720p60hz 1080p60hz 640x480p60hz 800x600p60hz 1024x768p60hz 1920x1200p60hz ++++++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/vesa_cap + ++++++++++++++++++++++++++++++++++++++++++++++++++++ 640x480p60hz 800x600p60hz 1024x768p60hz 1920x1200p60hz ++++++++++++++++++++++ + /flash/vesa.enable + ++++++++++++++++++++++ Unset by user! +++++++++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/custom_mode + +++++++++++++++++++++++++++++++++++++++++++++++++++++++ Not Found! ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/preferred_mode + ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ (null) +++++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/hdr_cap + +++++++++++++++++++++++++++++++++++++++++++++++++++ HDR10Plus Supported: 0 HDR Static Metadata: Supported EOTF: Traditional SDR: 1 Traditional HDR: 0 SMPTE ST 2084: 1 Hybrid Log-Gamma: 0 Supported SMD type1: 1 Luminance Data Max: 105 Avg: 105 Min: 79 HDR Dynamic Metadata: colorimetry_data: 0 +++++++++++++++++++++++++++++++++++++++++++ + /sys/module/am_vecm/parameters/hdr_mode + +++++++++++++++++++++++++++++++++++++++++++ Not Found! +++++++++++++++++++++++++++++++++++++++++++ + /sys/module/am_vecm/parameters/sdr_mode + +++++++++++++++++++++++++++++++++++++++++++ Not Found! +++++++++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/module/am_vecm/parameters/video_process_status + +++++++++++++++++++++++++++++++++++++++++++++++++++++++ Not Found! +++++++++++++++++++++++++++++++++++++++++++++ + /sys/module/am_vecm/parameters/hdr_policy + +++++++++++++++++++++++++++++++++++++++++++++ Not Found! ++++++++++++++++++++++++++++ + /sys/class/display/vinfo + ++++++++++++++++++++++++++++ current vinfo: name: 1080p60hz mode: 0 frac: 0 width: 1920 height: 1080 field_height: 1080 aspect_ratio_num: 16 aspect_ratio_den: 9 screen_real_width: 390 screen_real_height: 240 sync_duration_num: 60 sync_duration_den: 1 (meas_frame_rate: 0.000) std_duration: 0 vfreq_max: 0 vfreq_min: 0 htotal: 2200 vtotal: 1125 video_clk: 148500000 fr_adj_type: 4 viu_color_fmt: 2 viu_mux: 0x2 3d_info: 0 cur_enc_ppc: 0 master_display_info: present_flag 0 features 0x0 primaries 0x0, 0x0 0x0, 0x0 0x0, 0x0 white_point 0x0, 0x0 luminance 0, 0 hdr_static_info: hdr_support 5 lumi_max 105 lumi_avg 105 lumi_min 79 ldim_support 0 lumi_peak 0 hdr_dynamic_info: metadata_version: 0 support_flags: 0 optional_fields: metadata_version: 0 support_flags: 0 optional_fields: metadata_version: 0 support_flags: 0 optional_fields: metadata_version: 0 support_flags: 0 optional_fields: hdr10+: ieeeoui: 0 application_version: 0 +++++++++++++++++++++++++ + kodi display settings + +++++++++++++++++++++++++ coreelec.amlogic.limit8bit: coreelec.amlogic.force422: coreelec.amlogic.deinterlacing: coreelec.amlogic.noisereduction: false coreelec.amlogic.hdr2sdr: false coreelec.amlogic.sdr2hdr: false videoplayer.adjustrefreshrate: 2 videoplayer.useamcodec: true videoplayer.useamcodech264: 0 videoplayer.useamcodecmpeg2: 0 videoplayer.useamcodecmpeg4: 0 videoplayer.usedisplayasclock: false videoscreen.whitelist: lookandfeel.skin: skin.estuary ++++++++++++++++++++++++++++++++++++ + /storage/.kodi/userdata/disp_cap + ++++++++++++++++++++++++++++++++++++ Unset by user! ++++++++++++++++++++++++++++++++++++ + /storage/.kodi/userdata/disp_add + ++++++++++++++++++++++++++++++++++++ Unset by user! +++++++++++++++++++++++++ + /flash/resolution.ini + +++++++++++++++++++++++++ # WARNING DO NOT MODIFY THIS FILE! ALL CHANGES WILL BE LOST! kernel_hdmimode=1080p60hz frac_rate_policy=0 native_4k_gui=0 hdmitx=, CoreELEC Remote Control Information... +++++++++++++++++++++++++++++++++++++ + /proc/device-tree/meson-ir/status + +++++++++++++++++++++++++++++++++++++ okay +++++++++++++++++++++++++++++++++++++++++ + /proc/device-tree/meson-remote/status + +++++++++++++++++++++++++++++++++++++++++ okay +++++++++++++++++++++++++++++++++++ + /storage/.config/remote.disable + +++++++++++++++++++++++++++++++++++ Unset by user! +++++++++++++++++++++++++ + /flash/remote.disable + +++++++++++++++++++++++++ Unset by user! +++++++++++++++++++++++++++++++++ + /storage/.config/remote*.conf + +++++++++++++++++++++++++++++++++ Unset by user! +++++++++++++++++++++++ + /flash/remote*.conf + +++++++++++++++++++++++ Unset by user! +++++++++++++++++++++++++++++++ + /storage/.config/lircd.conf + +++++++++++++++++++++++++++++++ Unset by user! ++++++++++++++++++++++++++++++++++++++ + /storage/.config/lirc_options.conf + ++++++++++++++++++++++++++++++++++++++ Unset by user! ++++++++++++++++++++++++++++++++ + /storage/.config/rc_maps.cfg + ++++++++++++++++++++++++++++++++ # Keymaps table # # This table creates an association between a keycode file and a kernel # driver. It can be used to automatically override a keycode definition. # # # Format: # driver - name of the driver provided via uevent - use * for any driver # table - RC keymap table, provided via uevent - use * for any table # file - file name. If directory is not specified, it is first looked up # in /storage/.config/rc_keymaps, then /usr/lib/udev/rc_keymaps # # For example: # # driver table file # # gpio-rc-recv rc-streamzap streamzap # gpio-rc-recv * justboom # * rc-rc6-mce rc6_mce_new # * * hauppauge_new meson-ir * x98mini +++++++++++++++++++++++++++++++ + /storage/.config/rc_keymaps + +++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++++++++++++ + /storage/.config/rc_keymaps/README + ++++++++++++++++++++++++++++++++++++++ RC keymaps user config dir put your own keymaps for ir-keytable in this directory +++++++++++++++++++++++++++++++++++++++ + /storage/.config/rc_keymaps/x98mini + +++++++++++++++++++++++++++++++++++++++ # table x98mini, type: NEC 0x140 KEY_POWER 0x116 KEY_UP 0x11a KEY_DOWN 0x151 KEY_LEFT 0x150 KEY_RIGHT 0x113 KEY_ENTER 0x110 KEY_VOLUMEDOWN 0x119 KEY_BACK 0x118 KEY_VOLUMEUP 0x111 KEY_HOME 0x14c KEY_MENU 0x100 KEY_CONFIG 0x14e KEY_1 0x10d KEY_2 0x10c KEY_3 0x14a KEY_4 0x109 KEY_5 0x108 KEY_6 0x146 KEY_7 0x105 KEY_8 0x104 KEY_9 0x101 KEY_0 0x142 KEY_BACKSPACE 0x143 KEY_HELP 0x10f KEY_PAUSE 0x14b KEY_REWIND 0x14f KEY_FORWARD 0x141 KEY_MUTE 0x1f4 KEY_LANGUAGE 0x1f5 KEY_SUBTITLE 0x1f2 KEY_ESC 0x1f3 KEY_INFO 0x155 KEY_INFO 0x154 KEY_FASTFORWARD +++++++++++++++++++++++++++++++++++++++ + /storage/.kodi/userdata/Lircmap.xml + +++++++++++++++++++++++++++++++++++++++ Unset by user! ++++++++++++++++++++++++++++++++++++++++ + /storage/.kodi/userdata/keyboard.xml + ++++++++++++++++++++++++++++++++++++++++ Unset by user! +++++++++++++++++++++++++++++++++++ + /storage/.kodi/userdata/keymaps + +++++++++++++++++++++++++++++++++++ +++++++++ + BL301 + +++++++++ checkbl301 not found! CoreELEC Audio Information... +++++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/aud_cap + +++++++++++++++++++++++++++++++++++++++++++++++++++ CodingType MaxChannels SamplingFreq SampleSize PCM, 2 ch, 32/44.1/48/88.2/96/176.4/192 kHz, 16/20/24 bit ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + /proc/device-tree/pinctrl@ff634480/spdifout/mux/groups + ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Not Found! ++++++++++++++++++++ + /sys/class/sound + ++++++++++++++++++++ AMLAUGESOUND |-card0 |-controlC0 |-pcmC0D0p |-pcmC0D1c |-pcmC0D1p |-pcmC0D2c |-pcmC0D2p |-pcmC0D3c |-pcmC0D3p ++++++++++++++++++++++ + /proc/asound/cards + ++++++++++++++++++++++ 0 [AMLAUGESOUND ]: AML-AUGESOUND - AML-AUGESOUND AML-AUGESOUND ++++++++++++++++++++ + /proc/asound/pcm + ++++++++++++++++++++ 00-00: SPDIF-B-SPDIF-B SPDIF-B-0 : : playback 1 00-01: TDM-B-T9015-audio-hifi fe01a000.t9015-1 : : playback 1 : capture 1 00-02: SPDIF-SPDIF SPDIF-2 : : playback 1 : capture 1 00-03: TDM-C-dummy soc:dummy-3 : : playback 1 : capture 1 ++++++++++++ + aplay -l + ++++++++++++ **** List of PLAYBACK Hardware Devices **** card 0: AMLAUGESOUND [AML-AUGESOUND], device 0: SPDIF-B-SPDIF-B SPDIF-B-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: AMLAUGESOUND [AML-AUGESOUND], device 1: TDM-B-T9015-audio-hifi fe01a000.t9015-1 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: AMLAUGESOUND [AML-AUGESOUND], device 2: SPDIF-SPDIF SPDIF-2 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: AMLAUGESOUND [AML-AUGESOUND], device 3: TDM-C-dummy soc:dummy-3 [] Subdevices: 0/1 Subdevice #0: subdevice #0 ++++++++++++ + aplay -L + ++++++++++++ null Discard all samples (playback) or generate zero samples (capture) default:CARD=AMLAUGESOUND AML-AUGESOUND, Default Audio Device sysdefault:CARD=AMLAUGESOUND AML-AUGESOUND, Default Audio Device surround71:CARD=AMLAUGESOUND,DEV=0 AML-AUGESOUND, 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=AMLAUGESOUND,DEV=0 AML-AUGESOUND, IEC958 (S/PDIF) Digital Audio Output hdmi:CARD=AMLAUGESOUND,DEV=0 AML-AUGESOUND, HDMI Audio Output +++++++++++++++++++++++ + kodi audio settings + +++++++++++++++++++++++ accessibility.audiohearing: false accessibility.audiovisual: false accessibility.subhearing: false audiooutput.ac3passthrough: true audiooutput.ac3transcode: false audiooutput.atempothreshold: 2 audiooutput.audiodevice: ALSA:surround71:CARD=AMLAUGESOUND,DEV=0|AML-AUGESOUND audiooutput.boostcenter: 0 audiooutput.channels: 1 audiooutput.config: 3 audiooutput.dtshdpassthrough: false audiooutput.dtspassthrough: false audiooutput.eac3passthrough: false audiooutput.guisoundmode: 1 audiooutput.maintainoriginalvolume: true audiooutput.passthrough: false audiooutput.passthroughdevice: ALSA:iec958:CARD=AMLAUGESOUND,DEV=0|AML-AUGESOUND audiooutput.processquality: 30 audiooutput.samplerate: 48000 audiooutput.audiooutput.stereoupmix: audiooutput.audiooutput.streamnoise: audiooutput.audiooutput.streamsilence: audiooutput.truehdpassthrough: false audiooutput.volumesteps: 20 musicplayer.replaygainavoidclipping: false musicplayer.replaygainnogainpreamp: 89 musicplayer.replaygainpreamp: 89 musicplayer.replaygaintype: 1 musicplayer.seekdelay: 750 musicplayer.seeksteps: -60,-30,-10,10,30,60 mute: false volumelevel: 1.000000 +++++++++++++++++++++++++++++++ + /storage/.config/sound.conf + +++++++++++++++++++++++++++++++ Unset by user! ++++++++++++++++++++++++++++++++ + /storage/.config/asound.conf + ++++++++++++++++++++++++++++++++ Unset by user! ++++++++++++++++++++++++++++++++++++++++ + /storage/.config/pulse-daemon.conf.d + ++++++++++++++++++++++++++++++++++++++++