CoreELEC Debug Information... +++++++++++++++++++ + /etc/os-release + +++++++++++++++++++ NAME="CoreELEC" VERSION="21.0-Omega" ID="coreelec" VERSION_ID="21.0" PRETTY_NAME="CoreELEC (official): 21.0-Omega" HOME_URL="https://coreelec.org" BUG_REPORT_URL="https://github.com/CoreELEC/CoreELEC" BUILD_ID="8884ca14605e326d09a79538c16cdf071dbfb65d" LIBREELEC_ARCH="Amlogic-ng.arm" LIBREELEC_BUILD="official" LIBREELEC_PROJECT="Amlogic-ce" COREELEC_ARCH="Amlogic-ng.arm" COREELEC_BUILD="official" COREELEC_PROJECT="Amlogic-ce" COREELEC_DEVICE="Amlogic-ng" ++++++++++++++++++++++++++++++++++++ + /proc/device-tree/coreelec-dt-id + ++++++++++++++++++++++++++++++++++++ g12b_s922x_minix_u22xj ++++++++++++++++++++++++++++++ + /proc/device-tree/le-dt-id + ++++++++++++++++++++++++++++++ Not Found! +++++++++++++++++ + /proc/cmdline + +++++++++++++++++ init=/init console=ttyS0,115200 no_console_suspend earlycon=aml-uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 hdr_policy=0 hdr_priority= otg_device=1 reboot_mode_android=normal logo=viu2_osd0,loaded,0x3d800000 fb_width=1920 fb_height=1080 vout2=panel,enable vout=1080p60hz,enable panel_type=lcd_2 lcd_ctrl=0x00000083 hdmitx=,444,8bit hdmimode=1080p60hz realoutputmode=1080p60hz hdmichecksum=0x0bbd0000 hdmi_real_checksum=0x0bbd0000 dolby_vision_on=0 hdmi_fake_on=0 frac_rate_policy=1 hdmi_read_edid=1 cvbsmode=576cvbs osd_reverse=0 video_reverse=0 irq_check_en=0 androidboot.selinux=enforcing androidboot.firstboot=0 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01-g420c5510c7-dirty androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 mac=A0:1E:0B:10:8E:14 androidboot.mac=A0:1E:0B:10:8E:14 androidboot.oem.key1=ATV00104319 BOOT_IMAGE=kernel.img boot=LABEL=CE_FLASH disk=FOLDER=/dev/CE_STORAGE console=ttyS0,115200 console=tty0 no_console_suspend keymap=us enable_wol=1 vout=1080p60hz,en logo=osd0,loaded,0x3d800000 frac_rate_policy=0 native_4k_gui=0 hdmitx=, hdr_policy=1 quiet systemd.show_status=auto ++++++++++++++++++++++++++++++ + /storage/.config/boot.hint + ++++++++++++++++++++++++++++++ OK ++++++++++++++++++++++++++++++++ + /storage/.config/boot.status + ++++++++++++++++++++++++++++++++ OK +++++++++++++++++++ + /flash/boot.ini + +++++++++++++++++++ Not Found! +++++++++++++++++++++ + /flash/config.ini + +++++++++++++++++++++ #------------------------------------------------------------------------------------------------------ # # config.ini # #------------------------------------------------------------------------------------------------------ #------------------------------------------------------------------------------------------------------ # # Console Setup # # consoleopt='console=ttyS0,115200 console=tty0 no_console_suspend' # #------------------------------------------------------------------------------------------------------ #------------------------------------------------------------------------------------------------------ # # CPU Frequency Control # # WARNING!!! WARNING!!! WARNING!!! # Before changing anything here please read the wiki entry at: # https://wiki.odroid.com/odroid-n2/application_note/software/set_cpu_freq # # max_freq_a73='1800' # max_freq_a53='1896' # #------------------------------------------------------------------------------------------------------ #------------------------------------------------------------------------------------------------------ # # HDMI CEC Control # Set by CoreELEC Settings # # cec_func_config='7f' # #------------------------------------------------------------------------------------------------------ #------------------------------------------------------------------------------------------------------ # # HDMI CEC OSD Name # Set by CoreELEC Settings # cec_osd_name='CoreELEC' # #------------------------------------------------------------------------------------------------------ #------------------------------------------------------------------------------------------------------ # # IR setup # Setup a custom keycode to wake the N2/C4 from suspend or poweroff # You can stop kodi and eventlircd and use "ir-keytable -u" to obtain a compatible u-boot # IR keycode # This setting will require a injected bl301 blob. # remotewakeup='0xe718fe01' # # decode_type can be one of the following: # NEC='0x0', DUOKAN='0x1', TOSHIBA='0x2', RCA='0x3', RC5='0x4', RC6A='0x5', NEC_TOSHIBA_2IN1='0x6', # NEC_RCA_2IN1='0x7', RCMM='0x8', NEC_RC5_2IN1='0x9', NEC_RC5_2IN1='0xa', RC6='0xb' # This setting will require a injected bl301 blob. # decode_type='0x0' # # remote power key mask: # Some IR protocols implement a toggle bit, this can be ignored by the "and" mask: # RC5='0x37ff', RC6='0x1effff', RC6A='0xffff7fff' # This setting will require a injected bl301 blob. # remotewakeupmask='0xffffffff' # #------------------------------------------------------------------------------------------------------ #------------------------------------------------------------------------------------------------------ # # WOL Setting, 0=off/1=on # Set by CoreELEC Settings # wol='1' # #------------------------------------------------------------------------------------------------------ #------------------------------------------------------------------------------------------------------ # # Power Off and Wake Up using GPIO Key Button # Valid options for Odroid N2/C4 are 476,477,478,479,480,481,483,484,485,486,487,488,489,490,491,492 # Valid option for Khadas VIM3 is 503 # # gpiopower=476 # (pin 16 of J2 header) #------------------------------------------------------------------------------------------------------ #------------------------------------------------------------------------------------------------------ # # USB specific options # # usbopts='usb-xhci.tablesize=2' # #------------------------------------------------------------------------------------------------------ #------------------------------------------------------------------------------------------------------ # # USB Power Control # Set by CoreELEC Settings # # usbpower=0 # #------------------------------------------------------------------------------------------------------ #------------------------------------------------------------------------------------------------------ # # HDMI custom mode # You can use this setting to set a custom video mode # modeline "horpixels,verpixels,pixel_clock,hor_freq,ver_freq,hdisp,hsyncstart,hsyncend,htotal,vdisp, # vsyncstart,vsyncend,vtotal,hsync_polarity,vsync_polarity,progress_mode" # # Example for 1920x1080p@60hz # modeline='1920,1080,148500,67500,60,1920,2008,2052,2200,1080,1084,1088,1125,1,1,1' # #------------------------------------------------------------------------------------------------------ #------------------------------------------------------------------------------------------------------ # # VOUT mode # You can use this setting to set a specific video mode at boot. # # vout='1080p60hz' # #------------------------------------------------------------------------------------------------------ #------------------------------------------------------------------------------------------------------ # # Fractional Refresh Rate # You can use this setting to set a fractional refresh rate. So for example if vout mode it set to # 1080p60hz then setting this to 1 will make the refresh rate switch to 59.97hz instead of the modes # default of 60hz. In this example setting it to 0 will keep the modes default of 60hz. # # frac_rate_policy='0' # #------------------------------------------------------------------------------------------------------ #------------------------------------------------------------------------------------------------------ # # Busybox console keyboard layout # Set by CoreELEC Settings # keymap='us' # #------------------------------------------------------------------------------------------------------ #------------------------------------------------------------------------------------------------------ # # CoreELEC Developer Options # Valid options are: textmode debugging progress nofsck nosplash noram overlay quiet ssh # # coreelec='quiet' # #------------------------------------------------------------------------------------------------------ ++++++++++++++++++ + /flash/dtb.xml + ++++++++++++++++++ default-on heartbeat rc-feedback sd emmc none default-on heartbeat rc-feedback sd emmc none default-on heartbeat rc-feedback sd emmc none okay okay disabled disabled okay okay disabled disabled okay disabled 1 255 2 3 4 5 6 8 MMC_CAP2_HS200 MMC_CAP2_HS400 MMC_CAP2_HS200 170000000 200000000 0 0x1621 1 0x4BE04 okay disabled disabled okay 0x1621 0x10000 0 0 0x1609 0xc0000 smartchip,disabled smartchip,s9083s pio smartchip,s9188s pio smartchip,richv300s pio ++++++++++++++++++ + /flash/cfgload + ++++++++++++++++++ echo "Using device ${device}, number ${devnr}, partition ${partnr}, CoreELEC on eMMC: ${ce_on_emmc}" setenv decode_type "0" setenv remotewakeupmask "0xffffffff" setenv coreelec "quiet" setenv vout "1080p60hz" setenv frac_rate_policy "0" setenv native_4k_gui "0" setenv rootopt "BOOT_IMAGE=kernel.img boot=LABEL=COREELEC disk=LABEL=STORAGE" if test "${ce_on_emmc}" = "yes"; then setenv rootopt "BOOT_IMAGE=kernel.img boot=LABEL=CE_FLASH disk=FOLDER=/dev/CE_STORAGE"; fi if fatload ${device} ${devnr}:${partnr} ${loadaddr} resolution.ini; then env import -t ${loadaddr} ${filesize}; fi if test "${allfmt_names}" != ""; then for name in ${allfmt_names}; do if test "${kernel_hdmimode}" = ${name}; then setenv vout ${name}; fi; done; fi if fatload ${device} ${devnr}:${partnr} ${loadaddr} config.ini; then env import -t ${loadaddr} ${filesize}; fi setenv consoleopt "console=ttyS0,115200 console=tty0 no_console_suspend" if test "${cec_func_config}" != ""; then setenv cec "hdmitx=cec${cec_func_config}"; fi if test "${gpiopower}" != ""; then setenv gpiopower "gpiopower=${gpiopower}"; fi if test "${max_freq_a53}" != ""; then setenv max_freq_a53 "max_freq_a53=${max_freq_a53}"; fi if test "${max_freq_a73}" != ""; then setenv max_freq_a73 "max_freq_a73=${max_freq_a73}"; fi if test "${modeline}" != ""; then setenv cmode "modeline=${modeline}"; fi if test "${wol}" != ""; then setenv wol "enable_wol=${wol}"; fi if test "${keymap}" != ""; then setenv consoleopt "${consoleopt} keymap=${keymap}"; fi if test "${loadaddr_kernel}" != ""; then setenv loadaddr "${loadaddr_kernel}"; fi setenv displayopt "vout=${vout},en logo=osd0,loaded,${fb_addr} frac_rate_policy=${frac_rate_policy} native_4k_gui=${native_4k_gui} hdmitx=${hdmitx} hdr_policy=1" setenv initargs "${rootopt} ${consoleopt} ${max_freq_a53} ${max_freq_a73} ${wol} ${cec} ${gpiopower} ${usbopts} ${cmode}" setenv bootargs "${bootargs} ${initargs} ${displayopt} ${coreelec}" fatload ${device} ${devnr}:${partnr} ${loadaddr} kernel.img fatload ${device} ${devnr}:${partnr} ${dtb_mem_addr} dtb.img bootm ${loadaddr} bootm start bootm loados bootm prep bootm go +++++++++++++++++++++++++ + /flash/aml_autoscript + +++++++++++++++++++++++++ defenv setenv bootfromnand 0 setenv upgrade_step 2 setenv ce_on_emmc "no" setenv sddtb 'if fatload mmc 0 ${dtb_mem_addr} dtb.img; then else store dtb read $dtb_mem_addr; fi' setenv usbdtb 'if fatload usb 0 ${dtb_mem_addr} dtb.img; then else store dtb read $dtb_mem_addr; fi' setenv cfgloadsd 'if fatload mmc 0:1 ${loadaddr} cfgload; then setenv device mmc; setenv devnr 0; setenv partnr 1; autoscr ${loadaddr}; fi' setenv cfgloadusb 'if fatload usb 0:1 ${loadaddr} cfgload; then setenv device usb; setenv devnr 0; setenv partnr 1; autoscr ${loadaddr}; fi' setenv cfgloademmc 'for p in 1 2 3 4 5 6 7 8 9 A B C D E F 10 11 12 13 14 15 16 17 18; do if fatload mmc 1:${p} ${loadaddr} cfgload; then setenv device mmc; setenv devnr 1; setenv partnr ${p}; setenv ce_on_emmc "yes"; autoscr ${loadaddr}; fi; done;' setenv bootfromsd 'if mmcinfo; then run cfgloadsd; if fatload mmc 0 ${loadaddr} kernel.img; then run sddtb; setenv bootargs ${bootargs} bootfromsd; bootm; fi; fi' setenv bootfromusb 'usb start 0; run cfgloadusb; if fatload usb 0 ${loadaddr} kernel.img; then run usbdtb; setenv bootargs ${bootargs} bootfromusb; bootm; fi' setenv bootfromemmc 'run cfgloademmc' setenv bootcmd 'if test ${bootfromnand} = 1; then setenv bootfromnand 0; saveenv; else run bootfromsd; run bootfromusb; run bootfromemmc; fi; run storeboot' saveenv run storeargs run bootfromsd run bootfromusb run bootfromemmc +++++++++++++++++++++++++++++++++ + /storage/.config/autostart.sh + +++++++++++++++++++++++++++++++++ Unset by user! ++++++++++++++++++++++++++++++ + /storage/init-previous.log + ++++++++++++++++++++++++++++++ Not Found! +++++++++++++++ + fw_printenv + +++++++++++++++ 1080p60hz_deepcolor=444,8bit EnableSelinux=enforcing Irq_check_en=0 active_slot=normal aml_dt=g12b_w400_a avb2=0 baudrate=115200 bcb_cmd=get_avb_mode;get_valid_slot; boot_part=boot bootargs=init=/init console=ttyS0,115200 no_console_suspend earlycon=aml-uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 hdr_policy=0 hdr_priority= otg_device=1 reboot_mode_android=normal logo=viu2_osd0,loaded,0x3d800000 fb_width=1920 fb_height=1080 vout2=panel,enable vout=1080p60hz,enable panel_type=lcd_2 lcd_ctrl=0x00000083 hdmitx=,444,8bit hdmimode=1080p60hz realoutputmode=1080p60hz hdmichecksum=0x0bbd0000 hdmi_real_checksum=0x0bbd0000 dolby_vision_on=0 hdmi_fake_on=0 frac_rate_policy=1 hdmi_read_edid=1 cvbsmode=576cvbs osd_reverse=0 video_reverse=0 irq_check_en=0 androidboot.selinux=enforcing androidboot.firstboot=0 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01-g420c5510c7-dirty androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 mac=A0:1E:0B:10:8E:14 androidboot.mac=A0:1E:0B:10:8E:14 androidboot.oem.key1=ATV00104319 bootcmd=if test ${bootfromnand} = 1; then setenv bootfromnand 0; saveenv; else run bootfromsd; run bootfromusb; run bootfromemmc; fi; run storeboot bootdelay=1 bootfromemmc=run cfgloademmc bootfromnand=0 bootfromsd=if mmcinfo; then run cfgloadsd; if fatload mmc 0 ${loadaddr} kernel.img; then run sddtb; setenv bootargs ${bootargs} bootfromsd; bootm; fi; fi bootfromusb=usb start 0; run cfgloadusb; if fatload usb 0 ${loadaddr} kernel.img; then run usbdtb; setenv bootargs ${bootargs} bootfromusb; bootm; fi bootloader_version=U-Boot 2015.01-g420c5510c7-dirty bootup_offset=0x10dd240 bootup_size=0x3f4848 ce_on_emmc=no cfgloademmc=for p in 1 2 3 4 5 6 7 8 9 A B C D E F 10 11 12 13 14 15 16 17 18; do if fatload mmc 1:${p} ${loadaddr} cfgload; then setenv device mmc; setenv devnr 1; setenv partnr ${p}; setenv ce_on_emmc "yes"; autoscr ${loadaddr}; fi; done; cfgloadsd=if fatload mmc 0:1 ${loadaddr} cfgload; then setenv device mmc; setenv devnr 0; setenv partnr 1; autoscr ${loadaddr}; fi cfgloadusb=if fatload usb 0:1 ${loadaddr} cfgload; then setenv device usb; setenv devnr 0; setenv partnr 1; autoscr ${loadaddr}; fi cmdline_keys=if keyman init 0x1234; then if keyman read usid ${loadaddr} str; then setenv bootargs ${bootargs} androidboot.serialno=${usid};setenv serial ${usid};else setenv bootargs ${bootargs} androidboot.serialno=1234567890;setenv serial 1234567890;fi;if keyman read mac ${loadaddr} str; then setenv bootargs ${bootargs} mac=${mac} androidboot.mac=${mac};fi;if keyman read deviceid ${loadaddr} str; then setenv bootargs ${bootargs} androidboot.deviceid=${deviceid};fi;if keyman read oemkey ${loadaddr} str; then setenv bootargs ${bootargs} androidboot.oem.key1=${oemkey};else setenv bootargs ${bootargs} androidboot.oem.key1=ATV00104319;fi;fi; colorattribute=444,8bit cvbs_drv=0 cvbsmode=576cvbs display_bpp=16 display_color_bg=0 display_color_fg=0xffff display_color_index=16 display_height=1280 display_layer=viu2_osd0 display_width=720 dolby_status=0 dolby_vision_on=0 dtb_mem_addr=0x1000000 ethact=dwmac.ff3f0000 ethaddr=a0:1e:0b:10:8e:14 factory_reset_poweroff_protect=echo wipe_data=${wipe_data}; echo wipe_cache=${wipe_cache};if test ${wipe_data} = failed; then run init_display; run storeargs;if mmcinfo; then run recovery_from_sdcard;fi;if usb start 0; then run recovery_from_udisk;fi;run recovery_from_flash;fi; if test ${wipe_cache} = failed; then run init_display; run storeargs;if mmcinfo; then run recovery_from_sdcard;fi;if usb start 0; then run recovery_from_udisk;fi;run recovery_from_flash;fi; fb_addr=0x3d800000 fb_height=1080 fb_width=1920 fdt_high=0x20000000 fdtaddr=1000000 firstboot=0 frac_rate_policy=1 fs_type=rootfstype=ramfs gatewayip=10.18.9.1 hdmi_fake_on=0 hdmi_read_edid=1 hdmi_real_checksum=0x0bbd0000 hdmichecksum=0x0bbd0000 hdmimode=1080p60hz hdr_policy=0 hostname=arm_gxbb init_display=get_rebootmode;echo reboot_mode:::: ${reboot_mode};if test ${reboot_mode} = quiescent; then setenv reboot_mode_android quiescent;setenv dolby_status 0;setenv dolby_vision_on 0;run storeargs;setenv bootargs ${bootargs} androidboot.quiescent=1;osd open;osd clear;else if test ${reboot_mode} = recovery_quiescent; then setenv reboot_mode_android quiescent;setenv dolby_status 0;setenv dolby_vision_on 0;run storeargs;setenv bootargs ${bootargs} androidboot.quiescent=1;osd open;osd clear;else setenv reboot_mode_android normal;run storeargs;hdmitx hpd;hdmitx get_preferred_mode;hdmitx get_parse_edid;dovi process;osd dual_logo;dovi set;dovi pkg;vpp hdrpkt;fi;fi; initargs=init=/init console=ttyS0,115200 no_console_suspend earlycon=aml-uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 initrd_high=7f800000 ipaddr=10.18.9.97 irremote_update=if irkey 2500000 0xe31cfb04 0xb748fb04; then echo read irkey ok!; if itest ${irkey_value} == 0xe31cfb04; then run update;else if itest ${irkey_value} == 0xb748fb04; then run update; fi;fi;fi; jtag=disable lcd_ctrl=0x00000083 loadaddr=1080000 lock=10001000 mac=A0:1E:0B:10:8E:14 netmask=255.255.255.0 osd_reverse=0 otg_device=1 outputmode=1080p60hz outputmode2=panel panel_type=lcd_2 preboot=run bcb_cmd; run factory_reset_poweroff_protect;run upgrade_check;run init_display;run storeargs;forceupdate;bcb uboot-command;run switch_bootmode; realoutputmode=1080p60hz reboot_mode=cold_boot reboot_mode_android=normal recovery_from_flash=get_valid_slot;echo active_slot: ${active_slot};if test ${active_slot} = normal; then setenv bootargs ${bootargs} ${fs_type} aml_dt=${aml_dt} recovery_part={recovery_part} recovery_offset={recovery_offset};if itest ${upgrade_step} == 3; then if ext4load mmc 1:2 ${dtb_mem_addr} /recovery/dtb.img; then echo cache dtb.img loaded; fi;if ext4load mmc 1:2 ${loadaddr} /recovery/recovery.img; then echo cache recovery.img loaded; wipeisb; bootm ${loadaddr}; fi;else fi;if imgread kernel ${recovery_part} ${loadaddr} ${recovery_offset}; then wipeisb; bootm ${loadaddr}; fi;else setenv bootargs ${bootargs} ${fs_type} aml_dt=${aml_dt} recovery_part=${boot_part} recovery_offset=${recovery_offset};if imgread kernel ${boot_part} ${loadaddr}; then bootm ${loadaddr}; fi;fi; recovery_from_sdcard=if fatload mmc 0 ${loadaddr} aml_autoscript; then autoscr ${loadaddr}; fi;if fatload mmc 0 ${loadaddr} recovery.img; then if fatload mmc 0 ${dtb_mem_addr} dtb.img; then echo sd dtb.img loaded; fi;wipeisb; setenv bootargs ${bootargs} ${fs_type};bootm ${loadaddr};fi; recovery_from_udisk=if fatload usb 0 ${loadaddr} aml_autoscript; then autoscr ${loadaddr}; fi;if fatload usb 0 ${loadaddr} recovery.img; then if fatload usb 0 ${dtb_mem_addr} dtb.img; then echo udisk dtb.img loaded; fi;wipeisb; setenv bootargs ${bootargs} ${fs_type};bootm ${loadaddr};fi; recovery_offset=0 recovery_part=recovery rpmb_state=1 sdc_burning=sdc_burn ${sdcburncfg} sdcburncfg=aml_sdc_burn.ini sddtb=if fatload mmc 0 ${dtb_mem_addr} dtb.img; then else store dtb read $dtb_mem_addr; fi serial=1234567890 serverip=10.18.9.113 stderr=serial stdin=serial stdout=serial storeargs=get_bootloaderversion;setenv bootargs ${initargs} hdr_policy=${hdr_policy} hdr_priority=${hdr_priority} otg_device=${otg_device} reboot_mode_android=${reboot_mode_android} logo=${display_layer},loaded,${fb_addr} fb_width=${fb_width} fb_height=${fb_height} vout2=${outputmode2},enable vout=${outputmode},enable panel_type=${panel_type} lcd_ctrl=${lcd_ctrl} hdmitx=${cecconfig},${colorattribute} hdmimode=${hdmimode} realoutputmode=${realoutputmode} hdmichecksum=${hdmichecksum} hdmi_real_checksum=${hdmi_real_checksum} dolby_vision_on=${dolby_vision_on} hdmi_fake_on=${hdmi_fake_on} frac_rate_policy=${frac_rate_policy} hdmi_read_edid=${hdmi_read_edid} cvbsmode=${cvbsmode} osd_reverse=${osd_reverse} video_reverse=${video_reverse} irq_check_en=${Irq_check_en} androidboot.selinux=${EnableSelinux} androidboot.firstboot=${firstboot} jtag=${jtag}; setenv bootargs ${bootargs} androidboot.hardware=amlogic androidboot.bootloader=${bootloader_version} androidboot.build.expect.baseband=N/A;run cmdline_keys; storeboot=boot_cooling;get_system_as_root_mode;echo system_mode: ${system_mode};if test ${system_mode} = 1; then setenv bootargs ${bootargs} ro rootwait skip_initramfs;else setenv bootargs ${bootargs} ${fs_type};fi;get_valid_slot;get_avb_mode;echo active_slot: ${active_slot};if test ${active_slot} != normal; then setenv bootargs ${bootargs} androidboot.slot_suffix=${active_slot};fi;if test ${avb2} = 0; then if test ${active_slot} = _a; then setenv bootargs ${bootargs} root=/dev/mmcblk0p23;else if test ${active_slot} = _b; then setenv bootargs ${bootargs} root=/dev/mmcblk0p24;fi;fi;fi;if imgread kernel ${boot_part} ${loadaddr}; then bootm ${loadaddr}; fi;run storeargs; run update; switch_bootmode=get_rebootmode;if test ${reboot_mode} = factory_reset; then setenv reboot_mode_android normal;run storeargs;run recovery_from_flash;else if test ${reboot_mode} = update; then setenv reboot_mode_android normal;run storeargs;run update;else if test ${reboot_mode} = quiescent; then setenv reboot_mode_android quiescent;run storeargs;setenv bootargs ${bootargs} androidboot.quiescent=1;else if test ${reboot_mode} = recovery_quiescent; then setenv reboot_mode_android quiescent;run storeargs;setenv bootargs ${bootargs} androidboot.quiescent=1;run recovery_from_flash;else if test ${reboot_mode} = cold_boot; then setenv reboot_mode_android normal;run storeargs;else if test ${reboot_mode} = fastboot; then setenv reboot_mode_android normal;run storeargs;fastboot;fi;fi;fi;fi;fi;fi; try_auto_burn=update 700 750; update=run usb_burning; run sdc_burning; if mmcinfo; then run recovery_from_sdcard;fi;if usb start 0; then run recovery_from_udisk;fi;run recovery_from_flash; upgrade_check=echo upgrade_step=${upgrade_step}; if itest ${upgrade_step} == 3; then run init_display; run storeargs; run update;else fi; upgrade_key=if gpio input GPIOAO_3; then echo detect upgrade key; run update;fi; upgrade_step=2 usb_burning=update 1000 usbdtb=if fatload usb 0 ${dtb_mem_addr} dtb.img; then else store dtb read $dtb_mem_addr; fi video_reverse=0 wipe_cache=successful wipe_data=successful +++++++++ + lsmod + +++++++++ Module Size Used by meson_remote 61440 0 hci_uart 122880 1 btbcm 16384 1 hci_uart btqca 16384 1 hci_uart btintel 24576 1 hci_uart bluetooth 622592 5 hci_uart,btintel,btqca,btbcm dovi 929792 0 nfsd 323584 5 exportfs 16384 1 nfsd nfs_acl 16384 1 nfsd dhd 1097728 0 mali_kbase 516096 3 wireguard 135168 0 ip6_udp_tunnel 16384 1 wireguard udp_tunnel 16384 1 wireguard wifi_dummy 16384 0 amvdec_vp9 143360 0 amvdec_av1 172032 0 amvdec_vc1 77824 0 amvdec_real 49152 0 amvdec_ports 167936 0 videobuf2_dma_contig 20480 1 amvdec_ports v4l2_mem2mem 28672 1 amvdec_ports videobuf2_memops 16384 1 videobuf2_dma_contig videobuf2_v4l2 28672 2 amvdec_ports,v4l2_mem2mem videobuf2_core 49152 3 amvdec_ports,v4l2_mem2mem,videobuf2_v4l2 v4l2_common 16384 1 amvdec_ports amvdec_mpeg4 73728 0 amvdec_mpeg12 131072 0 amvdec_mmpeg4 49152 0 amvdec_mmpeg12 53248 0 amvdec_mmjpeg 32768 0 amvdec_mjpeg 45056 0 amvdec_mh264 184320 0 amvdec_h265 176128 0 amvdec_h264mvc 65536 0 amvdec_h264 172032 0 amvdec_mavs 61440 0 amvdec_avs 81920 0 amvdec_avs2 233472 0 stream_input 212992 13 amvdec_h265,amvdec_mavs,amvdec_mh264,amvdec_h264mvc,amvdec_av1,amvdec_ports,amvdec_real,amvdec_vp9,amvdec_h264,amvdec_avs2,amvdec_mpeg12,amvdec_avs,amvdec_mmpeg12 decoder_common 266240 19 amvdec_h265,amvdec_mavs,amvdec_mjpeg,amvdec_mh264,amvdec_mmpeg4,amvdec_h264mvc,amvdec_av1,amvdec_mmjpeg,amvdec_ports,amvdec_real,stream_input,amvdec_vp9,amvdec_h264,amvdec_avs2,amvdec_mpeg12,amvdec_avs,amvdec_vc1,amvdec_mmpeg12,amvdec_mpeg4 firmware 28672 19 amvdec_h265,amvdec_mavs,amvdec_mjpeg,amvdec_mh264,amvdec_mmpeg4,amvdec_h264mvc,amvdec_av1,amvdec_mmjpeg,decoder_common,amvdec_real,stream_input,amvdec_vp9,amvdec_h264,amvdec_avs2,amvdec_mpeg12,amvdec_avs,amvdec_vc1,amvdec_mmpeg12,amvdec_mpeg4 media_clock 57344 17 amvdec_h265,amvdec_mavs,amvdec_mh264,amvdec_mmpeg4,amvdec_av1,amvdec_mmjpeg,decoder_common,amvdec_ports,firmware,stream_input,amvdec_vp9,amvdec_h264,amvdec_avs2,amvdec_mpeg12,amvdec_avs,amvdec_vc1,amvdec_mpeg4 video_framerate_adapter 16384 1 decoder_common amlvideodri 20480 0 videobuf_res 16384 1 amlvideodri videobuf_core 32768 2 amlvideodri,videobuf_res videodev 282624 6 amlvideodri,v4l2_common,amvdec_ports,videobuf2_core,v4l2_mem2mem,videobuf2_v4l2 media 53248 1 videodev fuse 114688 1 nfnetlink 16384 1 fbcon 57344 0 bitblit 16384 1 fbcon softcursor 16384 1 bitblit font 20480 1 fbcon +++++++++ + lsusb + +++++++++ Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. Hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 002: ID 05e3:0612 Genesys Logic, Inc. Hub CoreELEC Display Information... ++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/edid + ++++++++++++++++++++++++++++++++++++++++++++++++ Rx Manufacturer Name: DEL Rx Product Code: a0d9 Rx Serial Number: 36503742 Rx Product Name: DELL Manufacture Week: 33 Manufacture Year: 2016 Physcial size(mm): 480 x 270 EDID Version: 1.3 EDID block number: 0x1 blk0 chksum: 0x0b Source Physical Address[a.b.c.d]: 1.0.0.0 native Mode b1, VIC (native 16): ColorDeepSupport 0 16 5 4 3 2 7 22 1 20 31 18 19 Audio {format, channel, freq, cce} {1, 1, 7, 1} Speaker Allocation: 0 Vendor: 0xc03 ( HDMI device) MaxTMDSClock1 0 MHz vLatency: Invalid/Unknown aLatency: Invalid/Unknown i_vLatency: Invalid/Unknown i_aLatency: Invalid/Unknown SCDC: 0 RR_Cap: 0 LTE_340M_Scramble: 0 checkvalue: 0x0bbd0000 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/edid_parsing + ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ok +++++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/rawedid + +++++++++++++++++++++++++++++++++++++++++++++++++++ 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 ++++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/config + ++++++++++++++++++++++++++++++++++++++++++++++++++ cur_VIC: 16 cur_video_param->VIC=16 VIC: 16 1920x1080p60hz Colour depth: 8-bit Colourspace: YUV444 Colour range: default EOTF: SDR YCC colour range: limited Colourimetry: BT.709 PLL clock: 0xdb1204f7, Vid clock div 0x000a739c audio config: on audio on/off: on audio source: SPDIF audio type: L-PCM audio channel num: 2 channels audio sample rate: 44.1kHz audio sample size: MAX 3D config: off ++++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/dc_cap + ++++++++++++++++++++++++++++++++++++++++++++++++++ 444,8bit 422,12bit 422,10bit 422,8bit rgb,8bit ++++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/dv_cap + ++++++++++++++++++++++++++++++++++++++++++++++++++ The Rx don't support DolbyVision ++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/attr + ++++++++++++++++++++++++++++++++++++++++++++++++ , ++++++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/disp_cap + ++++++++++++++++++++++++++++++++++++++++++++++++++++ 480i60hz 576i50hz 480p60hz 576p50hz 720p60hz 1080i60hz 1080p60hz* 720p50hz 1080i50hz 1080p50hz 640x480p60hz 800x600p60hz 1024x768p60hz 1152x864p75hz 1280x1024p60hz 1600x900p60hz ++++++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/vesa_cap + ++++++++++++++++++++++++++++++++++++++++++++++++++++ 640x480p60hz 800x600p60hz 1024x768p60hz 1152x864p75hz 1280x1024p60hz 1600x900p60hz ++++++++++++++++++++++ + /flash/vesa.enable + ++++++++++++++++++++++ Unset by user! +++++++++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/custom_mode + +++++++++++++++++++++++++++++++++++++++++++++++++++++++ Not Found! ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/preferred_mode + ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1080p60hz +++++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/hdr_cap + +++++++++++++++++++++++++++++++++++++++++++++++++++ HDR10Plus Supported: 0 HDR Static Metadata: Supported EOTF: Traditional SDR: 0 Traditional HDR: 0 SMPTE ST 2084: 0 Hybrid Log-Gamma: 0 Supported SMD type1: 0 Luminance Data Max: 0 Avg: 0 Min: 0 HDR Dynamic Metadata: colorimetry_data: 0 +++++++++++++++++++++++++++++++++++++++++++ + /sys/module/am_vecm/parameters/hdr_mode + +++++++++++++++++++++++++++++++++++++++++++ 0 +++++++++++++++++++++++++++++++++++++++++++ + /sys/module/am_vecm/parameters/sdr_mode + +++++++++++++++++++++++++++++++++++++++++++ 0 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/module/am_vecm/parameters/video_process_status + +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2,2 +++++++++++++++++++++++++++++++++++++++++++++ + /sys/module/am_vecm/parameters/hdr_policy + +++++++++++++++++++++++++++++++++++++++++++++ 1 ++++++++++++++++++++++++++++ + /sys/class/display/vinfo + ++++++++++++++++++++++++++++ current vinfo: name: 1080p60hz mode: 0 frac: 0 width: 1920 height: 1080 field_height: 1080 aspect_ratio_num: 16 aspect_ratio_den: 9 sync_duration_num: 60 sync_duration_den: 1 screen_real_width: 480 screen_real_height: 270 htotal: 2200 vtotal: 1125 fr_adj_type: 4 video_clk: 148500000 viu_color_fmt: 2 viu_mux: 2 3d_info: 0 master_display_info: present_flag 0 features 0x0 primaries 0x0, 0x0 0x0, 0x0 0x0, 0x0 white_point 0x0, 0x0 luminance 0, 0 hdr_static_info: hdr_support 0 lumi_max 0 lumi_avg 0 lumi_min 0 hdr_dynamic_info: metadata_version: 0 support_flags: 0 optional_fields: metadata_version: 0 support_flags: 0 optional_fields: metadata_version: 0 support_flags: 0 optional_fields: metadata_version: 0 support_flags: 0 optional_fields: hdr10+: ieeeoui: 0 application_version: 0 +++++++++++++++++++++++++ + kodi display settings + +++++++++++++++++++++++++ coreelec.amlogic.limit8bit: coreelec.amlogic.force422: coreelec.amlogic.deinterlacing: coreelec.amlogic.noisereduction: false coreelec.amlogic.hdr2sdr: false coreelec.amlogic.sdr2hdr: false videoplayer.adjustrefreshrate: 2 videoplayer.useamcodec: true videoplayer.useamcodech264: 0 videoplayer.useamcodecmpeg2: 0 videoplayer.useamcodecmpeg4: 800 videoplayer.usedisplayasclock: false videoscreen.whitelist: lookandfeel.skin: skin.estuary ++++++++++++++++++++++++++++++++++++ + /storage/.kodi/userdata/disp_cap + ++++++++++++++++++++++++++++++++++++ Unset by user! ++++++++++++++++++++++++++++++++++++ + /storage/.kodi/userdata/disp_add + ++++++++++++++++++++++++++++++++++++ Unset by user! +++++++++++++++++++++++++ + /flash/resolution.ini + +++++++++++++++++++++++++ # WARNING DO NOT MODIFY THIS FILE! ALL CHANGES WILL BE LOST! kernel_hdmimode=1080p60hz frac_rate_policy=0 native_4k_gui=0 hdmitx=, allfmt_names=2160p60hz 2160p50hz 2160p30hz 2160p25hz 2160p24hz smpte24hz smpte25hz smpte30hz smpte50hz smpte60hz 1080p25hz 1080p30hz 1080p50hz 1080p60hz 1080p24hz 1080p120hz 1080i60hz 1080i50hz 720p60hz 720p50hz 480p60hz 480i60hz 576p50hz 576i50hz 480p60hz_4x3 480i60hz_4x3 576p50hz_4x3 576i50hz_4x3 2160p60hz420 smpte60hz420 2160p50hz420 smpte50hz420 2560x1080p50hz 2560x1080p60hz 640x480p60hz 800x480p60hz 800x600p60hz 852x480p60hz 854x480p60hz 1024x600p60hz 1024x768p60hz 1152x864p75hz 1280x768p60hz 1280x800p60hz 1280x960p60hz 1280x1024p60hz 1360x768p60hz 1366x768p60hz 1400x1050p60hz 1440x900p60hz 1440x2560p60hz 2560x1440p60hz 1600x900p60hz 1600x1200p60hz 1680x1050p60hz 1920x1200p60hz 2048x1080p24hz 2160x1200p90hz 2560x1600p60hz 3440x1440p60hz 2400x1200p90hz 3840x1080p60hz invalid CoreELEC Remote Control Information... +++++++++++++++++++++++++++++++++++++ + /proc/device-tree/meson-ir/status + +++++++++++++++++++++++++++++++++++++ okay +++++++++++++++++++++++++++++++++++++++++ + /proc/device-tree/meson-remote/status + +++++++++++++++++++++++++++++++++++++++++ okay +++++++++++++++++++++++++++++++++++ + /storage/.config/remote.disable + +++++++++++++++++++++++++++++++++++ Unset by user! +++++++++++++++++++++++++ + /flash/remote.disable + +++++++++++++++++++++++++ Unset by user! +++++++++++++++++++++++++++++++++ + /storage/.config/remote*.conf + +++++++++++++++++++++++++++++++++ Unset by user! +++++++++++++++++++++++ + /flash/remote*.conf + +++++++++++++++++++++++ ++++++++++++++++++++++ + /flash/remote.conf + ++++++++++++++++++++++ # ********************************************************************************************************* # # this file is configuration for each factory remote device # # work_mode 0 :software mode 1 :hardware mode # repeat_enable 0 :disable repeat 1 :enable repeat # # factory_code each device has it's unique factory code. # pattern:custom_code(16bit)+index_code(16bit) # examble: 0xff000001 = 0xff00(custom cod) 0001 (index) # # release_delay unit:ms.release will report from kernel to user layer after this period of time # from press or repeat triggered. # # debug_enable 0 :debug disable 1 :debug disable # # SW MODE: # # bit_count how many bits in each frame # tw_leader_act time window for leader active # tw_bit0 time window for bit0 time. # tw_bit1 time window for bit1 time # tw_repeat_leader time window for repeat leader # # REG # # reg_base_gen set value for PREG_IR_DEC_BASE_GEN # reg_control set value for PREG_IR_DEC_CONTROL # reg_leader_act set value for PREG_IR_DEC_LEADER_ACTIVE # reg_leader_idle set value for PREG_IR_DEC_LEADER_IDLE # reg_repeat_leader set value for PREG_IR_DEC_REPEAT_IDLE # reg_bit0_time set value for PREG_IR_DEC_BIT0_TIME # # ********************************************************************************************************* # # amlogic NEC remote * Minix Neo X8-H Plus # factory_code = 0xfe010001 work_mode = 0 repeat_enable = 1 repeat_delay = 250 repeat_peroid = 39 release_delay = 190 debug_enable = 1 # left_key_scancode = 0x47 right_key_scancode = 0x15 up_key_scancode = 0x46 down_key_scancode = 0x16 ok_key_scancode = 0x55 # key_begin 0x55 28 # ENTER 0x18 116 # POWER WAKE 0x16 108 # DPAD_DOWN 0x46 103 # DPAD_UP 0x0d 102 # HOME 0x47 105 # DPAD_LEFT 0x15 106 # DPAD_RIGHT 0x14 115 # VOLUME_UP 0x10 114 # VOLUME_DOWN 0x40 1 # BACK 0x04 46 # MENU 0x12 132 # TV_REPEAT key_end # repeat_key_begin 0x14 115 # VOLUME_UP 0x10 114 # VOLUME_DOWN repeat_key_end # +++++++++++++++++++++++++++++++ + /storage/.config/lircd.conf + +++++++++++++++++++++++++++++++ Unset by user! ++++++++++++++++++++++++++++++++++++++ + /storage/.config/lirc_options.conf + ++++++++++++++++++++++++++++++++++++++ Unset by user! ++++++++++++++++++++++++++++++++ + /storage/.config/rc_maps.cfg + ++++++++++++++++++++++++++++++++ Unset by user! +++++++++++++++++++++++++++++++ + /storage/.config/rc_keymaps + +++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++++++++++++ + /storage/.config/rc_keymaps/README + ++++++++++++++++++++++++++++++++++++++ RC keymaps user config dir put your own keymaps for ir-keytable in this directory +++++++++++++++++++++++++++++++++++++++ + /storage/.kodi/userdata/Lircmap.xml + +++++++++++++++++++++++++++++++++++++++ Unset by user! ++++++++++++++++++++++++++++++++++++++++ + /storage/.kodi/userdata/keyboard.xml + ++++++++++++++++++++++++++++++++++++++++ Unset by user! +++++++++++++++++++++++++++++++++++ + /storage/.kodi/userdata/keymaps + +++++++++++++++++++++++++++++++++++ +++++++++ + BL301 + +++++++++ checkbl301 not found! CoreELEC Audio Information... +++++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/aud_cap + +++++++++++++++++++++++++++++++++++++++++++++++++++ CodingType MaxChannels SamplingFreq SampleSize PCM, 2 ch, 32/44.1/48 kHz, 16 bit ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + /proc/device-tree/pinctrl@ff634480/spdifout/mux/groups + ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Not Found! ++++++++++++++++++++ + /sys/class/sound + ++++++++++++++++++++ AMLAUGESOUND |-card0 |-controlC0 |-pcmC0D0p |-pcmC0D1c |-pcmC0D1p |-pcmC0D2c |-pcmC0D2p |-pcmC0D3c |-pcmC0D3p ++++++++++++++++++++++ + /proc/asound/cards + ++++++++++++++++++++++ 0 [AMLAUGESOUND ]: AML-AUGESOUND - AML-AUGESOUND AML-AUGESOUND ++++++++++++++++++++ + /proc/asound/pcm + ++++++++++++++++++++ 00-00: SPDIF-B-dummy dummy-0 : : playback 1 00-01: TDM-B-rt5651-aif1 rt5651-aif1-1 : : playback 1 : capture 1 00-02: SPDIF-A-dummy dummy-2 : : playback 1 : capture 1 00-03: TDM-C-dummy dummy-3 : : playback 1 : capture 1 ++++++++++++ + aplay -l + ++++++++++++ **** List of PLAYBACK Hardware Devices **** card 0: AMLAUGESOUND [AML-AUGESOUND], device 0: SPDIF-B-dummy dummy-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: AMLAUGESOUND [AML-AUGESOUND], device 1: TDM-B-rt5651-aif1 rt5651-aif1-1 [] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: AMLAUGESOUND [AML-AUGESOUND], device 2: SPDIF-A-dummy dummy-2 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: AMLAUGESOUND [AML-AUGESOUND], device 3: TDM-C-dummy dummy-3 [] Subdevices: 1/1 Subdevice #0: subdevice #0 ++++++++++++ + aplay -L + ++++++++++++ null Discard all samples (playback) or generate zero samples (capture) default:CARD=AMLAUGESOUND AML-AUGESOUND, Default Audio Device sysdefault:CARD=AMLAUGESOUND AML-AUGESOUND, Default Audio Device surround71:CARD=AMLAUGESOUND,DEV=0 AML-AUGESOUND, 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=AMLAUGESOUND,DEV=0 AML-AUGESOUND, IEC958 (S/PDIF) Digital Audio Output hdmi:CARD=AMLAUGESOUND,DEV=0 AML-AUGESOUND, HDMI Audio Output +++++++++++++++++++++++ + kodi audio settings + +++++++++++++++++++++++ accessibility.audiohearing: false accessibility.audiovisual: false accessibility.subhearing: false audiooutput.ac3passthrough: true audiooutput.ac3transcode: false audiooutput.atempothreshold: 2 audiooutput.audiodevice: ALSA:@|Default (AML-AUGESOUND Analog) audiooutput.boostcenter: 0 audiooutput.channels: 1 audiooutput.config: 3 audiooutput.dtshdpassthrough: false audiooutput.dtspassthrough: false audiooutput.eac3passthrough: false audiooutput.guisoundmode: 1 audiooutput.maintainoriginalvolume: true audiooutput.passthrough: false audiooutput.passthroughdevice: ALSA:iec958:CARD=AMLAUGESOUND,DEV=0|AML-AUGESOUND audiooutput.processquality: 30 audiooutput.samplerate: 48000 audiooutput.audiooutput.stereoupmix: audiooutput.audiooutput.streamnoise: audiooutput.audiooutput.streamsilence: audiooutput.truehdpassthrough: false audiooutput.volumesteps: 20 musicplayer.replaygainavoidclipping: false musicplayer.replaygainnogainpreamp: 89 musicplayer.replaygainpreamp: 89 musicplayer.replaygaintype: 1 musicplayer.seekdelay: 750 musicplayer.seeksteps: -60,-30,-10,10,30,60 mute: false volumelevel: 0.600000 +++++++++++++++++++++++++++++++ + /storage/.config/sound.conf + +++++++++++++++++++++++++++++++ Unset by user! ++++++++++++++++++++++++++++++++ + /storage/.config/asound.conf + ++++++++++++++++++++++++++++++++ Unset by user! ++++++++++++++++++++++++++++++++++++++++ + /storage/.config/pulse-daemon.conf.d + ++++++++++++++++++++++++++++++++++++++++