CoreELEC Debug Information... +++++++++++++++++++ + /etc/os-release + +++++++++++++++++++ NAME="CoreELEC" VERSION="22.0-Piers_nightly_20250227" ID="coreelec" VERSION_ID="22.0" PRETTY_NAME="CoreELEC (official): 22.0-Piers_nightly_20250227" HOME_URL="https://coreelec.org" BUG_REPORT_URL="https://github.com/CoreELEC/CoreELEC" BUILD_ID="d4f216ec57f07a8b9acbb30f24a387fe967ff4fd" LIBREELEC_ARCH="Amlogic-no.aarch64" LIBREELEC_BUILD="official" LIBREELEC_PROJECT="Amlogic-ce" COREELEC_ARCH="Amlogic-no.aarch64" COREELEC_BUILD="official" COREELEC_PROJECT="Amlogic-ce" COREELEC_DEVICE="Amlogic-no" BUILDER_NAME="TheCoolest" ++++++++++++++++++++++++++++++++++++ + /proc/device-tree/coreelec-dt-id + ++++++++++++++++++++++++++++++++++++ sc2_s905x4_sei_smb_280_id5 ++++++++++++++++++++++++++++++ + /proc/device-tree/le-dt-id + ++++++++++++++++++++++++++++++ Not Found! +++++++++++++++++ + /proc/cmdline + +++++++++++++++++ systemd.show_status=auto init=/init console=ttyS0,921600 no_console_suspend earlycon=aml-uart,0xfe07a000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 loop.max_part=4 scramble_reg=0xfe02e030 scsi_mod.scan=async xhci_hcd.quirks=0x800000 otg_device=1 logo=osd0,loaded,0x7f800000 vout=1080p60hz,enable panel_type=lcd_1 hdmitx=,422,12bit hdmimode=1080p60hz hdmichecksum=0x01a60000 hdr_priority=268435456 hdr_force_mode= dolby_status=0 frac_rate_policy=1 hdmi_read_edid=1 cvbsmode=576cvbs cpufreq.default_governor=performance osd_reverse=0 video_reverse=0 kvm-arm.mode=none otg_device=0 hw_id=5 androidboot.enable_console=0 skip_driver_register=0 loglevel=1 cma_first_wm_low=on init_on_alloc=0 androidboot.oem=ATV0010002100000000000000000CC2W mac=8C:98:06:45:2B:31 BOOT_IMAGE=kernel.img boot=LABEL=COREELEC disk=LABEL=STORAGE console=tty0 keymap=us remotewakeup=0xffffffff decode_type=0 remotewakeupmask=0xffffffff vout=1080p60hz,dis frac_rate_policy=0 hdmitx=, hdr_policy=1 quiet reboot_mode=cold_boot androidboot.bootreason=cold_boot androidboot.selinux=enforcing androidboot.firstboot=1 androidboot.bootloader=01.01.241107.175553 androidboot.hardware=amlogic androidboot.production_mode=0 androidboot.ddr_size=4043309056B androidboot. androidboot.serialno=1242574373960001738 androidboot.rpmb_state=0x1 androidboot.vbmeta.device=/dev/block/vbmeta androidboot.vbmeta.avb_version=1.2 androidboot.vbmeta.device_state=locked androidboot.vbmeta.hash_alg=sha256 androidboot.vbmeta.size=12288 androidboot.vbmeta.digest=2a7ac1dc809dc90d127706aff679f1dfa66493d701565da4f7ed7b2282ac5a66 androidboot.veritymode=enforcing androidboot.veritymode.managed=yes androidboot.verifiedbootstate=green usbcore.autosuspend=-1 ++++++++++++++++++++++++++++++ + /storage/.config/boot.hint + ++++++++++++++++++++++++++++++ RESTORE ++++++++++++++++++++++++++++++++ + /storage/.config/boot.status + ++++++++++++++++++++++++++++++++ OK +++++++++++++++++++ + /flash/boot.ini + +++++++++++++++++++ Not Found! +++++++++++++++++++++ + /flash/config.ini + +++++++++++++++++++++ #------------------------------------------------------------------------------------------------------ # # config.ini # #------------------------------------------------------------------------------------------------------ #------------------------------------------------------------------------------------------------------ # # Console Setup # # consoleopt='console=tty0 no_console_suspend' # #------------------------------------------------------------------------------------------------------ #------------------------------------------------------------------------------------------------------ # # Onscreen Console Font # # fbcon='font:VGA8x16' # #------------------------------------------------------------------------------------------------------ #------------------------------------------------------------------------------------------------------ # # CPU Frequency Control # Setup a maximum cluster frequency in MHz. # max_freq_cluster='[cluster index]:[max frequency],[cluster index]:[max frequency],...' # # G12A: # cluster 0: A53, 4 CPUs # G12B: # cluster 0: A53, 2 CPUs # cluster 1: A73, 4 CPUs # SM1/SC2: # cluster 0: A55, 4 CPUs # S4: # cluster 0: A35, 4 CPUs # T7: # cluster 0: A53, 4 CPUs # cluster 1: A73, 4 CPUs # S5: # cluster 0: A55, 4 CPUs # cluster 1: A76, 1 CPUs # # max_freq_cluster='0:1800,1:2208' # #------------------------------------------------------------------------------------------------------ #------------------------------------------------------------------------------------------------------ # # HDMI CEC Control # Set by CoreELEC Settings # # cec_func_config='7f' # #------------------------------------------------------------------------------------------------------ #------------------------------------------------------------------------------------------------------ # # IR setup # Setup a custom keycode to wake the Amlogic device from suspend or poweroff # You can stop kodi and eventlircd and use "ir-keytable -u" to obtain a compatible u-boot # IR keycode # This setting will require a injected bl30 blob. # # remotewakeup='0x31ce4db2' # # decode_type can be one of the following: # NEC='0x0', RC5='0x4', RC6A='0x5', RC6='0xb' # This setting will require a injected bl30 blob. # # decode_type='0x0' # NEC # # remote power key mask: # Some IR protocols implement a toggle bit, this can be ignored by the "and" mask: # RC5='0x37ff', RC6='0x1effff', RC6A='0xffff7fff' # This setting will require a injected bl30 blob. # # remotewakeupmask='0xffffffff' # #------------------------------------------------------------------------------------------------------ #------------------------------------------------------------------------------------------------------ # # Power Off and Wake Up using GPIO Key Button # Define a gpio by string, like 'GPIOD_4' for Khadas VIM4 as example # This setting will require a injected bl30 blob. # # gpiopower='GPIOD_4' #------------------------------------------------------------------------------------------------------ #------------------------------------------------------------------------------------------------------ # # USB Power Control # Set by CoreELEC Settings # # usbpower=0 # #------------------------------------------------------------------------------------------------------ #------------------------------------------------------------------------------------------------------ # # VOUT mode # You can use this setting to set a specific video mode at boot. # This will override default set by resolution.ini. # # vout='1080p60hz' # #------------------------------------------------------------------------------------------------------ #------------------------------------------------------------------------------------------------------ # # Fractional Refresh Rate # You can use this setting to set a fractional refresh rate. So for example if vout mode it set to # 1080p60hz then setting this to 1 will make the refresh rate switch to 59.97hz instead of the modes # default of 60hz. In this example setting it to 0 will keep the modes default of 60hz. # This will override default set by resolution.ini. # # frac_rate_policy='0' # #------------------------------------------------------------------------------------------------------ #------------------------------------------------------------------------------------------------------ # # Busybox console keyboard layout # Set by CoreELEC Settings # keymap='us' # #------------------------------------------------------------------------------------------------------ #------------------------------------------------------------------------------------------------------ # # CoreELEC Developer Options # Valid options are: textmode debugging progress nofsck nosplash noram overlay quiet ssh # # coreelec='quiet' # #------------------------------------------------------------------------------------------------------ ++++++++++++++++++ + /flash/dtb.xml + ++++++++++++++++++ default-on heartbeat rc-feedback mmc1 mmc0 none default-on heartbeat rc-feedback mmc1 mmc0 none default-on heartbeat rc-feedback mmc1 mmc0 none default-on none 1 255 2 3 4 5 6 8 2 0 1 0 ++++++++++++++++++ + /flash/cfgload + ++++++++++++++++++ echo "Using device ${device}, number ${devnr}, partition ${partnr}, CoreELEC on eMMC: ${ce_on_emmc}" setenv remotewakeup "0xffffffff" setenv decode_type "0" setenv remotewakeupmask "0xffffffff" setenv coreelec "quiet" setenv vout "1080p60hz" setenv frac_rate_policy "0" setenv consoleopt "console=tty0 no_console_suspend" setenv rootopt "BOOT_IMAGE=kernel.img boot=LABEL=COREELEC disk=LABEL=STORAGE" if test "${ce_on_emmc}" = "yes"; then setenv rootopt "BOOT_IMAGE=kernel.img boot=LABEL=CE_FLASH disk=FOLDER=/dev/CE_STORAGE"; fi if fatload ${device} ${devnr}:${partnr} ${loadaddr} resolution.ini; then env import -t ${loadaddr} ${filesize}; fi if fatload ${device} ${devnr}:${partnr} ${loadaddr} config.ini; then env import -t ${loadaddr} ${filesize}; fi if test "${cec_func_config}" != ""; then setenv cec "hdmitx=cec${cec_func_config}"; fi if test "${gpiopower}" != ""; then setenv gpiopower "gpiopower=${gpiopower}"; fi if test "${kernel_hdmimode}" != ""; then setenv vout "${kernel_hdmimode}"; fi if test "${usbpower}" != ""; then setenv usbpower "enable_system_power=${usbpower}"; fi if test "${max_freq_cluster}" != ""; then setenv max_freq_cluster "max_freq_cluster=${max_freq_cluster}"; fi if test "${keymap}" != ""; then setenv keymap "keymap=${keymap}"; fi if test "${fbcon}" != ""; then setenv fbcon "fbcon=${fbcon}"; fi if test "${mac}" = "" && test "${ethaddr}" != ""; then setenv localmac "mac=${ethaddr}"; fi if test "${loadaddr_kernel}" != ""; then setenv loadaddr_kernel "0x02000000"; setenv loadaddr "${loadaddr_kernel}"; fi setenv irsetup "remotewakeup=${remotewakeup} decode_type=${decode_type} remotewakeupmask=${remotewakeupmask}" setenv displayopt "vout=${vout},dis frac_rate_policy=${frac_rate_policy} hdmitx=${hdmitx} hdr_policy=1" setenv initargs "${rootopt} ${consoleopt} ${fbcon} ${keymap} ${max_freq_cluster} ${localmac} ${cec} ${irsetup} ${usbpower} ${gpiopower}" setenv bootargs "${bootargs} ${initargs} ${displayopt} ${coreelec}" fatload ${device} ${devnr}:${partnr} ${loadaddr} kernel.img fatload ${device} ${devnr}:${partnr} ${dtb_mem_addr} dtb.img bootm ${loadaddr} bootm start bootm loados bootm prep bootm go +++++++++++++++++++++++++ + /flash/aml_autoscript + +++++++++++++++++++++++++ defenv setenv bootfromnand 0 setenv upgrade_step 2 setenv ce_on_emmc "no" setenv cfgloadsd 'if fatload mmc 0:1 ${loadaddr} cfgload; then setenv device mmc; setenv devnr 0; setenv partnr 1; source ${loadaddr}; autoscr ${loadaddr}; fi' setenv cfgloadusb 'if fatload usb 0:1 ${loadaddr} cfgload; then setenv device usb; setenv devnr 0; setenv partnr 1; source ${loadaddr}; autoscr ${loadaddr}; fi' setenv cfgloademmc 'for p in 1 2 3 4 5 6 7 8 9 A B C D E F 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F; do if fatload mmc 1:${p} ${loadaddr} cfgload; then setenv device mmc; setenv devnr 1; setenv partnr ${p}; setenv ce_on_emmc "yes"; source ${loadaddr}; autoscr ${loadaddr}; fi; done;' setenv bootfromsd 'if mmcinfo; then run cfgloadsd; fi' setenv bootfromusb 'usb start; if usb storage; then run cfgloadusb; fi' setenv bootfromemmc 'run cfgloademmc' setenv bootcmd 'if test ${bootfromnand} = 1; then setenv bootfromnand 0; saveenv; else run bootfromsd; run bootfromusb; run bootfromemmc; fi; run storeboot' if test "${fdtaddr}" = ""; then setenv fdtaddr ${dtb_mem_addr}; fi saveenv run storeargs run bootfromsd run bootfromusb run bootfromemmc +++++++++++++++++++++++++++++++++ + /storage/.config/autostart.sh + +++++++++++++++++++++++++++++++++ Unset by user! ++++++++++++++++++++++++++++++ + /storage/init-previous.log + ++++++++++++++++++++++++++++++ UPDATE IN PROGRESS Please do not reboot or turn off your CoreELEC device! Found new .tar archive Extracting contents of archive... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|done Checking KERNEL.md5... |OK Checking SYSTEM.md5... |/-\OK Checking size: OK Updating from 22.0-Piers_nightly_20250225 to 22.0-Piers_nightly_20250227 Updating Kernel...  0% 3% 3% 11% 18% 22% 30% 37% 43% 49% 56% 64% 71% 75% 83% 90% 98%100% Updating System...  0% 0% 0% 1% 2% 2% 3% 3% 4% 5% 5% 6% 6% 7% 8% 8% 9% 9% 10% 11% 12% 12% 13% 13% 14% 15% 15% 16% 16% 17% 18% 18% 19% 19% 20% 21% 22% 22% 23% 23% 24% 25% 25% 26% 26% 27% 28% 28% 29% 29% 30% 31% 31% 32% 33% 33% 34% 35% 35% 36% 36% 37% 38% 38% 39% 39% 40% 41% 41% 42% 42% 43% 44% 45% 45% 46% 46% 47% 48% 48% 49% 49% 50% 51% 51% 52% 52% 53% 54% 54% 55% 56% 56% 57% 57% 58% 59% 59% 60% 60% 60% 60% 60% 60% 60% 60% 60% 60% 60% 60% 60% 60% 60% 60% 60% 60% 60% 60% 60% 61% 61% 62% 63% 63% 64% 65% 65% 66% 67% 67% 68% 68% 69% 70% 70% 71% 71% 72% 73% 73% 74% 74% 75% 76% 76% 77% 78% 78% 79% 80% 80% 81% 81% 82% 82% 83% 84% 84% 85% 86% 86% 87% 88% 88% 89% 89% 90% 91% 91% 92% 92% 93% 94% 94% 95% 95% 96% 97% 98% 98% 99% 99%100%100% Updating Boot Files... Updating device tree with sc2_s905x4_sei_smb_280.dtb... Updating device_trees folder... Updating dtb.img by dtb.xml... Updating cfgload... Updating aml_autoscript... Boot Files Updated. Cleaning up... |/-\|/-\|/-\|done +++++++++++++++ + fw_printenv + +++++++++++++++ 1080p_h=1080 1080p_w=1920 1080p_x=0 1080p_y=0 2160p_h=2160 2160p_w=3840 2160p_x=0 2160p_y=0 EnableSelinux=enforcing active_slot=normal aml_dt=sc2_s905x4_ah212-id5 androidboot.dtbo_idx=0 arch=arm avb2=1 baudrate=115200 bcb_cmd=run bcb_cmd_base; bcb_cmd_base=get_avb_mode;get_valid_slot;if test ${vendor_boot_mode} = true; then setenv loadaddr_kernel 0x3000000;setenv dtb_mem_addr 0x1000000;fi;if test ${active_slot} != normal; then echo ab mode, read dtb from kernel;setenv common_dtb_load imgread dtb ${boot_part} ${dtb_mem_addr};else if test ${gpt_mode} = true; then echo gpt mode, read dtb from kernel;setenv common_dtb_load imgread dtb ${boot_part} ${dtb_mem_addr};fi;fi; board=ohm board_logo_part=odm_ext board_name=sc2_ah212_hua bootLogoPart=odm_ext boot_ddr_type=LPDDR4 boot_part=boot bootargs=init=/init console=ttyS0,921600 no_console_suspend earlycon=aml-uart,0xfe07a000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 loop.max_part=4 scramble_reg=0xfe02e030 scsi_mod.scan=async xhci_hcd.quirks=0x800000 otg_device=1 logo=osd0,loaded,0x7f800000 vout=1080p60hz,enable panel_type=lcd_1 hdmitx=,422,12bit hdmimode=1080p60hz hdmichecksum=0x01a60000 dolby_vision_on=0 hdr_policy=0 hdr_priority=268435456 hdr_force_mode= dolby_status=0 frac_rate_policy=1 hdmi_read_edid=1 cvbsmode=576cvbs cpufreq.default_governor=performance osd_reverse=0 video_reverse=0 disable_ir=0 kvm-arm.mode=none otg_device=0 hw_id=5 androidboot.enable_console=0 skip_driver_register=0 loglevel=1 cma_first_wm_low=on kvm-arm.mode=none init_on_alloc=0 androidboot.oem=ATV0010002100000000000000000CC2W mac=8C:98:06:45:2B:31 bootcmd=if test ${bootfromnand} = 1; then setenv bootfromnand 0; saveenv; else run bootfromsd; run bootfromusb; run bootfromemmc; fi; run storeboot bootconfig=androidboot.bootreason=kernel_panic androidboot.selinux=enforcing androidboot.firstboot=1 androidboot.bootloader=01.01.241107.175553 androidboot.hardware=amlogic androidboot.production_mode=0 androidboot.ddr_size=4043309056B androidboot.mac=8C:98:06:45:2B:31 androidboot.serialno=1242574373960001738 androidboot.rpmb_state=1x1 bootdelay=0 bootfromemmc=run cfgloademmc bootfromnand=0 bootfromsd=if mmcinfo; then run cfgloadsd; fi bootfromusb=usb start; if usb storage; then run cfgloadusb; fi bootloader_version=01.01.241107.175553 bootloader_wp=1 bootm_low=0 bootm_size=f1000000 buildtype=user ce_on_emmc=no cfgloademmc=for p in 1 2 3 4 5 6 7 8 9 A B C D E F 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F; do if fatload mmc 1:${p} ${loadaddr} cfgload; then setenv device mmc; setenv devnr 1; setenv partnr ${p}; setenv ce_on_emmc "yes"; source ${loadaddr}; autoscr ${loadaddr}; fi; done; cfgloadsd=if fatload mmc 0:1 ${loadaddr} cfgload; then setenv device mmc; setenv devnr 0; setenv partnr 1; source ${loadaddr}; autoscr ${loadaddr}; fi cfgloadusb=if fatload usb 0:1 ${loadaddr} cfgload; then setenv device usb; setenv devnr 0; setenv partnr 1; source ${loadaddr}; autoscr ${loadaddr}; fi check_result=succ cmdline_keys=setenv usid ohm${cpu_id};if keyman read oem ${loadaddr} str; then setenv bootargs ${bootargs} androidboot.oem=${oem};fi;run cmdline_keys_base; cmdline_keys_base=setenv region_code US;if keyman init 0x1234; then if keyman read usid ${loadaddr} str; then fi;if keyman read region_code ${loadaddr} str; then fi;if keyman read mac ${loadaddr} str; then setenv bootargs ${bootargs} mac=${mac};setenv bootconfig ${bootconfig} androidboot.mac=${mac};fi;if keyman read deviceid ${loadaddr} str; then setenv bootconfig ${bootconfig} androidboot.deviceid=${deviceid};fi;fi;setenv bootconfig ${bootconfig} androidboot.serialno=${usid};setenv serial ${usid}; setenv serial# ${usid};factory_provision init; colorattribute=422,12bit common_dtb_load=imgread dtb boot 0x1000000 config_csc_en=1 cpu=armv8 cpu_id=d60946810f16 cvbs_drv=0 cvbsmode=576cvbs ddr_size=4043309056B decaddr_kernel=0x01800000 default_governor=performance defenv_para=-c disable_ir=0 disableunlock=1 display_bpp=16 display_color_bg=0 display_color_fg=0xffff display_color_index=16 display_height=1080 display_layer=osd0 display_width=1920 dolby_status=0 dolby_vision_on=0 dtb_mem_addr=0x1000000 dv_fw_addr=0xa00000 dv_fw_dir=/oem/firmware/dovi_fw.bin dv_fw_dir_odm_ext=/odm_ext/firmware/dovi_fw.bin dv_fw_dir_vendor=/vendor/firmware/dovi_fw.bin enable_console=0 enter_fastboot=fastboot 0; ethaddr=8c:98:06:45:2b:31 expect_index=1 ext4LogoPath=/logo_files/bootup.bmp ext4LogoSz=3f4848 ext4logoLoadCmd=ext4load mmc 1:${logoPart} ${logoLoadAddr} ${ext4LogoPath} fastboot_step=0 fatload_dev=usb fb_addr=0x7f800000 fb_height=1080 fb_width=1920 fdt_high=0x20000000 fdtaddr=1000000 fdtcontroladdr=dff7dcc0 fileaddr=20000 filesize=3f4848 firstboot=1 forUpgrade_1stBootIndex=0 forUpgrade_bootloaderCopies=3 forUpgrade_bootloaderIndex=1 forUpgrade_flashType=BOOT_EMMC forUpgrade_robustOta=true forUpgrade_secureBoot=true forUpgrade_socType=32 frac_rate_policy=1 fs_type=rootfstype=ramfs gatewayip=10.18.9.1 get_os_type=if store read ${os_ident_addr} ${boot_part} 0 0x1000; then os_ident ${os_ident_addr}; fi gpt_mode=true hdmi_read_edid=1 hdmichecksum=0x01a60000 hdmimode=1080p60hz hdr_policy=0 hdr_priority=268435456 hostname=arm_gxbb hw_id=5 init_display=run init_display_base; init_display_base=get_rebootmode;echo reboot_mode:::: ${reboot_mode};if test ${reboot_mode} = quiescent; then setenv reboot_mode_android quiescent;setenv dolby_status 0;setenv dolby_vision_on 0;setenv initconfig androidboot.quiescent=1 androidboot.bootreason=${reboot_mode};osd open;osd clear;setenv vout_init enable;else if test ${reboot_mode} = recovery_quiescent; then setenv reboot_mode_android quiescent;setenv dolby_status 0;setenv dolby_vision_on 0;setenv initconfig androidboot.quiescent=1 androidboot.bootreason=recovery,quiescent;osd open;osd clear;setenv vout_init enable;else setenv reboot_mode_android normal;setenv initconfig androidboot.bootreason=${reboot_mode};hdmitx hpd;hdmitx get_parse_edid;dovi process;watermark_init;osd open;osd clear;run load_bmp_logo;bmp scale;vout output ${outputmode};dovi set;dovi pkg;vpp hdrpkt;fi;fi; initargs=init=/init console=ttyS0,921600 no_console_suspend earlycon=aml-uart,0xfe07a000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 loop.max_part=4 scramble_reg=0xfe02e030 scsi_mod.scan=async xhci_hcd.quirks=0x800000 initconfig=androidboot.bootreason=cold_boot initrd_high=7f800000 ipaddr=10.18.9.97 is.bestmode=true is_default_50hz_mode=0 is_not_hdr_preference=0 load_bmp_logo=run load_bmp_logo_base; load_bmp_logo_base=if rdext4pic ${board_logo_part} $loadaddr; then bmp display $logoLoadAddr; else if imgread pic logo bootup $loadaddr; then bmp display $bootup_offset; fi; fi; loadaddr=0x00020000 loadaddr_kernel=0x3000000 loadaddr_rtos=0x00080000 lock=10101000 loglevel=1 logoLoadAddr=20000 logoPart=c mac=8C:98:06:45:2B:31 netmask=255.255.255.0 nocs_mode=false oem=ATV0010002100000000000000000CC2W oemlock=lock os_ident_addr=0x00500000 osd_reverse=0 otg_device=1 outputmode=1080p60hz panel_type=lcd_1 partition_mode=dynamic preboot=run upgrade_check;run init_display;run storeargs;run upgrade_key;bcb uboot-command;run switch_bootmode; production_mode=0 reboot_mode=cold_boot reboot_mode_android=normal reboot_status=reboot_init recovery_check_part=0 recovery_from_fat_dev=run recovery_from_fat_dev_base; recovery_from_fat_dev_base=setenv loadaddr ${loadaddr_kernel};if fatload ${fatload_dev} 0 ${loadaddr} aml_autoscript; then if avb memory recovery ${loadaddr}; then avb recovery 1;autoscr ${loadaddr}; fi;fi;if fatload ${fatload_dev} 0 ${loadaddr} recovery.img; then if avb memory recovery ${loadaddr}; then avb recovery 1;if fatload ${fatload_dev} 0 ${dtb_mem_addr} dtb.img; then echo ${fatload_dev} dtb.img loaded; fi;setenv bootargs ${bootargs} ${fs_type};bootm ${loadaddr};fi;fi; recovery_from_flash=run recovery_from_flash_base; recovery_from_flash_base=echo active_slot: ${active_slot};setenv loadaddr ${loadaddr_kernel};setenv recovery_mode true;if test ${active_slot} = normal; then setenv bootargs ${bootargs} ${fs_type} aml_dt=${aml_dt} recovery_part=${recovery_part} recovery_offset=${recovery_offset};avb recovery 1;if test ${upgrade_step} = 3; then if ext4load mmc 1:2 ${dtb_mem_addr} /recovery/dtb.img; then echo cache dtb.img loaded; fi;if test ${vendor_boot_mode} = true; then if imgread kernel ${recovery_part} ${loadaddr} ${recovery_offset}; then bootm ${loadaddr}; fi;else if ext4load mmc 1:2 ${loadaddr} /recovery/recovery.img;then echo cache recovery.img loaded; bootm ${loadaddr}; fi;fi;else if imgread dtb recovery ${dtb_mem_addr}; then else echo restore dtb; run common_dtb_load;fi;fi;if imgread kernel ${recovery_part} ${loadaddr} ${recovery_offset}; then bootm ${loadaddr}; fi;else if fdt addr ${dtb_mem_addr}; then else echo retry common dtb; run common_dtb_load; fi;if test ${partition_mode} = normal; then setenv bootargs ${bootargs} ${fs_type} aml_dt=${aml_dt} recovery_part=${recovery_part} recovery_offset=${recovery_offset};setenv bootconfig ${bootconfig} androidboot.slot_suffix=${active_slot};if imgread kernel ${boot_part} ${loadaddr}; then bootm ${loadaddr}; fi;else if test ${vendor_boot_mode} = true; then setenv bootargs ${bootargs} ${fs_type} aml_dt=${aml_dt} recovery_part=${boot_part};setenv bootconfig ${bootconfig} androidboot.slot_suffix=${active_slot};if imgread kernel ${boot_part} ${loadaddr}; then bootm ${loadaddr}; fi;else setenv bootargs ${bootargs} ${fs_type} aml_dt=${aml_dt} recovery_part=${recovery_part} recovery_offset=${recovery_offset};setenv bootconfig ${bootconfig} androidboot.slot_suffix=${active_slot};if imgread kernel ${recovery_part} ${loadaddr} ${recovery_offset}; then bootm ${loadaddr}; fi;fi;fi;fi; recovery_from_sdcard=run recovery_from_sdcard_base; recovery_from_sdcard_base=setenv fatload_dev mmc;if mmcinfo; then run recovery_from_fat_dev; fi; recovery_from_udisk=run recovery_from_udisk_base; recovery_from_udisk_base=setenv fatload_dev usb;if usb start 0; then run recovery_from_fat_dev; fi; recovery_mode=false recovery_offset=0 recovery_part=recovery region_code=US retry_recovery_times=7 rollback_flag=0 rpmb_state=1 sdcburncfg=aml_sdc_burn.ini sei_colorattribute=444,8bit sei_hdmimode=1080p60hz serial=1242574373960001738 serial#=1242574373960001738 serverip=10.18.9.113 silent=0 skip_driver_register=0 skip_drv_val=0 slot-suffixes=-1 soc=sc2 standby_reboot_quiescent=0 standby_reboot_sei_quiescent=0 stderr=serial@a000 stdin=serial@a000 stdout=serial@a000 storage_param=run storage_param_base; storage_param_base=store param;setenv bootargs ${bootargs} ${mtdbootparts}; storeargs=get_bootloaderversion;run storeargs_base;setenv bootargs ${bootargs} otg_device=${usb_is_slave} hw_id=${hw_id} androidboot.enable_console=${enable_console} skip_driver_register=${skip_drv_val} loglevel=${loglevel} cma_first_wm_low=on kvm-arm.mode=none init_on_alloc=0;run cmdline_keys; storeargs_base=setenv bootargs ${initargs} otg_device=${otg_device} logo=${display_layer},loaded,${fb_addr} vout=${outputmode},${vout_init} panel_type=${panel_type} hdmitx=${cecconfig},${colorattribute} hdmimode=${hdmimode} hdmichecksum=${hdmichecksum} dolby_vision_on=${dolby_vision_on} hdr_policy=${hdr_policy} hdr_priority=${hdr_priority} hdr_force_mode=${hdr_force_mode} dolby_status=${dolby_status} frac_rate_policy=${frac_rate_policy} hdmi_read_edid=${hdmi_read_edid} cvbsmode=${cvbsmode} cpufreq.default_governor=${default_governor} osd_reverse=${osd_reverse} video_reverse=${video_reverse} disable_ir=${disable_ir} kvm-arm.mode=none;setenv bootconfig ${initconfig} androidboot.selinux=${EnableSelinux} androidboot.firstboot=${firstboot} androidboot.bootloader=${bootloader_version} androidboot.hardware=amlogic androidboot.production_mode=${production_mode} androidboot.ddr_size=${ddr_size} ; storeboot=run storeboot_base; storeboot_base=run get_os_type;run storage_param;if test ${os_type} = rtos; then setenv loadaddr ${loadaddr_rtos};store read ${loadaddr} ${boot_part} 0 0x400000;bootm ${loadaddr};else if test ${os_type} = kernel; then get_system_as_root_mode;echo system_mode in storeboot: ${system_mode};echo active_slot in storeboot: ${active_slot};if test ${system_mode} = 1; then setenv bootargs "${bootargs} ro rootwait skip_initramfs";else setenv bootconfig "${bootconfig} androidboot.force_normal_boot=1";fi;if test ${active_slot} != normal; then setenv bootconfig "${bootconfig} androidboot.slot_suffix=${active_slot}";fi;setenv bootconfig "${bootconfig} androidboot.rollback=${rollback_flag}";if fdt addr ${dtb_mem_addr}; then else echo retry common dtb; run common_dtb_load; fi;setenv loadaddr ${loadaddr_kernel};if imgread kernel ${boot_part} ${loadaddr}; then bootm ${loadaddr}; fi;else echo wrong OS format ${os_type}; fi;fi;echo try upgrade as booting failure; check_ab; run update; switch_bootmode=get_rebootmode;if test ${reboot_mode} = factory_reset; then run recovery_from_flash;else if test ${reboot_mode} = update; then run update;else if test ${reboot_mode} = quiescent; then setenv bootconfig ${bootconfig} androidboot.quiescent=1;setenv vout_init enable;run try_auto_burn;else if test ${reboot_mode} = recovery_quiescent; then setenv bootconfig ${bootconfig} androidboot.quiescent=1;setenv vout_init enable;run recovery_from_flash;else if test ${reboot_mode} = cold_boot; then run try_auto_burn;else if test ${reboot_mode} = fastboot; then fastboot 0;fi;fi;fi;fi;fi;fi; try_auto_burn=adnl 2000 3000; update=run update_base; update_base=run usb_burning;run recovery_from_sdcard;run recovery_from_udisk;run recovery_from_flash; upgrade_check=run upgrade_check_base; upgrade_check_base=echo recovery_status=${recovery_status};if itest.s "${recovery_status}" == "in_progress"; then run init_display;run storeargs; run recovery_from_flash;else fi;echo upgrade_step=${upgrade_step}; if itest ${upgrade_step} == 3; then run init_display;run storeargs; run update; fi; upgrade_key=if detect_upgradekey; then echo upgradekey_val:::: ${upgradekey_val};if test ${upgradekey_val} = fastboot; then osd clear;imgread pic logo fastboot $loadaddr;bmp display $fastboot_offset;bmp scale; echo detect fastboot key; fastboot 0;else if test ${upgradekey_val} = upgrade; then run update;fi;fi;fi; upgrade_key_base=if gpio input GPIOD_3; then echo detect upgrade key;if test ${upgrade_key_flag} = 0; then echo enter recovery; setenv upgrade_key_flag 1; saveenv;run recovery_from_flash;else if test ${upgrade_key_flag} = 1; then echo enter update; setenv upgrade_key_flag 2; saveenv; run update;else echo enter fastboot; setenv upgrade_key_flag 0; saveenv; fastboot 0;fi;fi;fi; upgrade_key_flag=0 upgrade_step=2 usb_burning=adnl 1200 usb_is_slave=0 user_prefer_dv_type=2 usid=1242574373960001738 vendor=amlogic vendor_boot_mode=true vendor_boot_part=vendor_boot video_reverse=0 vout_init=disable write_boot=0 +++++++++ + lsmod + +++++++++ Module Size Used by meson_remote 90112 0 amlogic_gkitool 20480 1 meson_remote amvdec_avs2_fb 356352 0 amvdec_av1_fb 270336 0 amvdec_h265_fb 290816 0 amvdec_vp9_fb 212992 0 amvdec_vp9 163840 0 amvdec_av1 196608 0 amvdec_vc1 94208 0 amvdec_mmpeg4 53248 0 amvdec_mmpeg12 77824 0 amvdec_mmjpeg 36864 0 amvdec_h266 937984 0 amvdec_h265 204800 0 amvdec_mh264 241664 0 amvdec_h264mvc 69632 0 amvdec_mavs 69632 0 amvdec_avs3 421888 0 amvdec_avs2 270336 0 stream_input 282624 11 amvdec_mh264,amvdec_av1_fb,amvdec_h265,amvdec_mavs,amvdec_avs3,amvdec_avs2_fb,amvdec_h265_fb,amvdec_vp9_fb,amvdec_h266,amvdec_mmpeg12,amvdec_avs2 decoder_common 507904 18 amvdec_av1,amvdec_mh264,amvdec_av1_fb,amvdec_vp9,amvdec_mmpeg4,amvdec_h265,amvdec_mavs,amvdec_avs3,amvdec_mmjpeg,amvdec_avs2_fb,amvdec_vc1,amvdec_h265_fb,stream_input,amvdec_vp9_fb,amvdec_h266,amvdec_mmpeg12,amvdec_h264mvc,amvdec_avs2 firmware 45056 19 amvdec_av1,amvdec_mh264,amvdec_av1_fb,amvdec_vp9,amvdec_mmpeg4,amvdec_h265,amvdec_mavs,amvdec_avs3,amvdec_mmjpeg,amvdec_avs2_fb,amvdec_vc1,amvdec_h265_fb,stream_input,amvdec_vp9_fb,decoder_common,amvdec_h266,amvdec_mmpeg12,amvdec_h264mvc,amvdec_avs2 media_clock 114688 20 amvdec_av1,amvdec_mh264,amvdec_av1_fb,amvdec_vp9,amvdec_mmpeg4,amvdec_h265,amvdec_mavs,amvdec_avs3,amvdec_mmjpeg,amvdec_avs2_fb,amvdec_vc1,amvdec_h265_fb,stream_input,firmware,amvdec_vp9_fb,decoder_common,amvdec_h266,amvdec_mmpeg12,amvdec_h264mvc,amvdec_avs2 pts_server 73728 14 amvdec_mh264,amvdec_vp9,amvdec_mmpeg4,amvdec_h265,amvdec_mavs,amvdec_avs3,amvdec_mmjpeg,amvdec_avs2_fb,amvdec_h265_fb,stream_input,decoder_common,amvdec_h266,amvdec_mmpeg12,amvdec_avs2 8021q 57344 0 hci_uart 217088 1 btqca 28672 1 hci_uart serdev 36864 1 hci_uart btintel 57344 1 hci_uart btbcm 28672 1 hci_uart bluetooth 1032192 25 btqca,btintel,hci_uart,btbcm dhd 2424832 0 dm_mod 233472 18 mali_kbase 1220608 4 nfsd 847872 5 nfs_acl 20480 1 nfsd nfnetlink 24576 1 autofs4 77824 0 +++++++++ + lsusb + +++++++++ Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 1a40:0101 Terminus Technology Inc. Hub Bus 001 Device 003: ID 346d:5678 PHILIPS USB Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub CoreELEC Display Information... ++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/edid + ++++++++++++++++++++++++++++++++++++++++++++++++ Rx Manufacturer Name: ONK Rx Product Code: 1260 Rx Serial Number: 00000000 Rx Product Name: AV Manufacture Week: 0 Manufacture Year: 2018 Physical size(mm): 1220 x 680 EDID Version: 1.3 Source Physical Address[a.b.c.d]: 3.4.0.0 native Mode f0, VIC (native 0): ColorDeepSupport b8 93 94 95 98 31 16 20 5 19 4 32 34 60 62 18 3 17 2 63 64 97 96 101 102 Audio {format, channel, freq, cce} {1, 1, 7f, 7} {1, 7, 7f, 7} {2, 5, 7, 50} {7, 7, 6, c0} {9, 5, 2, 0} {10, 7, 6, 3} {11, 7, 7e, 3} {11, 7, 7e, 1} {12, 7, 7e, 3} Speaker Allocation: 4f Vendor: 0xc03 ( HDMI device) MaxTMDSClock1 300 MHz MaxFRLRate: 0 Game/CNC3: 1 vLatency: Invalid/Unknown aLatency: Invalid/Unknown i_vLatency: Invalid/Unknown i_aLatency: Invalid/Unknown ColorMetry: 0xdf SCDC: 0 RR_Cap: 0 LTE_340M_Scramble: 0 dsc_10bpc: 0 dsc_12bpc: 0 dsc_16bpc: 0 dsc_all_bpp: 0 dsc_native_420: 0 dsc_1p2: 0 dsc_max_slices: 0x0(0 slices) dsc_max_frl_rate: 0x0 dsc_total_chunk_bytes: 0x0 DolbyVision2 HDR/13 DeepColor additional_vsif_num: 0 ifdb_present: 0 checkvalue: 0x01a60000 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/edid_parsing + ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ok +++++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/rawedid + +++++++++++++++++++++++++++++++++++++++++++++++++++ 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 ++++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/config + ++++++++++++++++++++++++++++++++++++++++++++++++++ VIC: 16 1920x1080p60hz Colour depth: 10-bit Colourspace: YUV444 Colour range: default EOTF: SDR YCC colour range: limited Colourimetry: BT.709 ++++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/dc_cap + ++++++++++++++++++++++++++++++++++++++++++++++++++ 420,8bit 444,12bit 444,10bit 444,8bit 422,12bit rgb,12bit rgb,10bit rgb,8bit ++++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/dv_cap + ++++++++++++++++++++++++++++++++++++++++++++++++++ DolbyVision RX support list: VSVDB Version: V2 2160p30hz: 1 Parity: 0 Support mode: DV_RGB_444_8BIT LL_YCbCr_422_12BIT IEEEOUI: 0x00d046 EMP: 0 VSVDB: eb0146d00048038288627697 ++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/attr + ++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/disp_cap + ++++++++++++++++++++++++++++++++++++++++++++++++++++ 2160p24hz 2160p25hz 2160p30hz smpte24hz 1080p50hz 1080p60hz 1080i50hz 1080i60hz 720p50hz 720p60hz 1080p24hz 1080p30hz 576p50hz 480p60hz 1920x1080p120hz 2160p60hz 2160p50hz smpte50hz smpte60hz 800x600p60hzV 1024x768p60hzV 1280x1024p60hzV 1680x1050p60hzV ++++++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/vesa_cap + ++++++++++++++++++++++++++++++++++++++++++++++++++++ 800x600p60hzV 1024x768p60hzV 1280x1024p60hzV 1680x1050p60hzV ++++++++++++++++++++++ + /flash/vesa.enable + ++++++++++++++++++++++ Unset by user! +++++++++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/custom_mode + +++++++++++++++++++++++++++++++++++++++++++++++++++++++ Not Found! ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/preferred_mode + ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2160p24hz +++++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/hdr_cap + +++++++++++++++++++++++++++++++++++++++++++++++++++ HDR10Plus Supported: 0 HDR Static Metadata: Supported EOTF: Traditional SDR: 1 Traditional HDR: 0 SMPTE ST 2084: 1 Hybrid Log-Gamma: 1 Supported SMD type1: 1 Luminance Data Max: 162 Avg: 190 Min: 6 HDR Dynamic Metadata: colorimetry_data: 0 +++++++++++++++++++++++++++++++++++++++++++ + /sys/module/am_vecm/parameters/hdr_mode + +++++++++++++++++++++++++++++++++++++++++++ Not Found! +++++++++++++++++++++++++++++++++++++++++++ + /sys/module/am_vecm/parameters/sdr_mode + +++++++++++++++++++++++++++++++++++++++++++ Not Found! +++++++++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/module/am_vecm/parameters/video_process_status + +++++++++++++++++++++++++++++++++++++++++++++++++++++++ Not Found! +++++++++++++++++++++++++++++++++++++++++++++ + /sys/module/am_vecm/parameters/hdr_policy + +++++++++++++++++++++++++++++++++++++++++++++ Not Found! ++++++++++++++++++++++++++++ + /sys/class/display/vinfo + ++++++++++++++++++++++++++++ current vinfo: name: 1080p60hz mode: 0 frac: 0 width: 1920 height: 1080 field_height: 1080 aspect_ratio_num: 16 aspect_ratio_den: 9 screen_real_width: 1220 screen_real_height: 680 sync_duration_num: 60 sync_duration_den: 1 brr_duration: 0 (meas_frame_rate: 60.000) std_duration: 0 vfreq_max: 0 vfreq_min: 0 htotal: 2200 vtotal: 1125 video_clk: 148500 fr_adj_type: 4 viu_color_fmt: 2 viu_mux: 0x2 cur_enc_ppc: 0 3d_info: 0 cs: 2 cd: 5 vpp_post_out_color_fmt:0 master_display_info: present_flag 0 features 0x0 primaries 0x0, 0x0 0x0, 0x0 0x0, 0x0 white_point 0x0, 0x0 luminance 0, 0 hdr_static_info: hdr_support 13 lumi_max 162 lumi_avg 190 lumi_min 6 hdr_dynamic_info: metadata_version: 0 support_flags: 0 optional_fields: metadata_version: 0 support_flags: 0 optional_fields: metadata_version: 0 support_flags: 0 optional_fields: metadata_version: 0 support_flags: 0 optional_fields: hdr10+: ieeeoui: 0 application_version: 0 +++++++++++++++++++++++++ + kodi display settings + +++++++++++++++++++++++++ coreelec.amlogic.limit8bit: coreelec.amlogic.force422: coreelec.amlogic.deinterlacing: coreelec.amlogic.noisereduction: false coreelec.amlogic.hdr2sdr: false coreelec.amlogic.sdr2hdr: false videoplayer.adjustrefreshrate: 2 videoplayer.useamcodec: true videoplayer.useamcodech264: 0 videoplayer.useamcodecmpeg2: 0 videoplayer.useamcodecmpeg4: 800 videoplayer.usedisplayasclock: false videoscreen.whitelist: lookandfeel.skin: skin.estuary ++++++++++++++++++++++++++++++++++++ + /storage/.kodi/userdata/disp_cap + ++++++++++++++++++++++++++++++++++++ Unset by user! ++++++++++++++++++++++++++++++++++++ + /storage/.kodi/userdata/disp_add + ++++++++++++++++++++++++++++++++++++ Unset by user! +++++++++++++++++++++++++ + /flash/resolution.ini + +++++++++++++++++++++++++ # WARNING DO NOT MODIFY THIS FILE! ALL CHANGES WILL BE LOST! kernel_hdmimode=1080p60hz frac_rate_policy=0 hdmitx=, CoreELEC Remote Control Information... +++++++++++++++++++++++++++++++++++++ + /proc/device-tree/meson-ir/status + +++++++++++++++++++++++++++++++++++++ okay +++++++++++++++++++++++++++++++++++++++++ + /proc/device-tree/meson-remote/status + +++++++++++++++++++++++++++++++++++++++++ okay +++++++++++++++++++++++++++++++++++ + /storage/.config/remote.disable + +++++++++++++++++++++++++++++++++++ Unset by user! +++++++++++++++++++++++++ + /flash/remote.disable + +++++++++++++++++++++++++ Unset by user! +++++++++++++++++++++++++++++++++ + /storage/.config/remote*.conf + +++++++++++++++++++++++++++++++++ Unset by user! +++++++++++++++++++++++ + /flash/remote*.conf + +++++++++++++++++++++++ ++++++++++++++++++++++ + /flash/remote.conf + ++++++++++++++++++++++ #amlogic NEC remote Dune HD BOX R 4K PLUS factory_code = 0x77880001 work_mode = 1 repeat_enable = 0 repeat_delay = 80 repeat_peroid = 120 release_delay = 20 debug_enable = 0 fn_key_scancode = 0x74 #MYSZ (ZAKŁADKA) left_key_scancode = 0x17 #LEWY right_key_scancode = 0x18 #PRAWY up_key_scancode = 0x15 #GÓRA down_key_scancode = 0x16 #DÓŁ ok_key_scancode = 0x19 #OK mouse_begin 0 0x17 #LEWY 1 0x18 #PRAWY 2 0x15 #GÓRA 3 0x16 #DÓŁ mouse_end key_begin 0x21 116 #Zasilanie 0x64 398 #CZERWONY (YOUTUBE) 0x63 399 #ZIELONY (NETFLIX) 0x67 400 #ŻÓŁTY (PRIME VIDEO) 0x68 401 #NIEBIESKI (ROCKET) 0x33 104 #PAGEUP (CH-) 0x34 109 #PAGEDOWN (CH+) 0x17 105 #LEWO 0x18 106 #PRAWO 0x15 103 #GÓRA 0x16 108 #DÓŁ 0x19 28 #ENTER (OK) 0x47 102 #STRONA GŁÓWNA 0x48 1 #ESC (WSTECZ) 0x60 46 #C (WEJŚCIE) 0x25 113 #WYCISZENIE 0x24 114 #ZMNIEJSZENIE GŁOŚNOŚCI 0x23 115 #VOLUMEUP 0x32 24 #INFO O KODEKU TV key_end repeat_key_begin 0x24 114 # KEY_VOLUMEDOWN 0x23 115 # KEY-VOLUMEUP 0x15 103 # KEY_UP 0x16 108 # KEY_DOWN 0x17 105 # KEY_LEFT 0x18 106 # KEY_RIGHT repeat_key_end +++++++++++++++++++++++++++++++ + /storage/.config/lircd.conf + +++++++++++++++++++++++++++++++ Unset by user! ++++++++++++++++++++++++++++++++++++++ + /storage/.config/lirc_options.conf + ++++++++++++++++++++++++++++++++++++++ Unset by user! ++++++++++++++++++++++++++++++++ + /storage/.config/rc_maps.cfg + ++++++++++++++++++++++++++++++++ Unset by user! +++++++++++++++++++++++++++++++ + /storage/.config/rc_keymaps + +++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++++++++++++ + /storage/.config/rc_keymaps/README + ++++++++++++++++++++++++++++++++++++++ RC keymaps user config dir put your own keymaps for ir-keytable in this directory +++++++++++++++++++++++++++++++++++++++ + /storage/.kodi/userdata/Lircmap.xml + +++++++++++++++++++++++++++++++++++++++ Unset by user! ++++++++++++++++++++++++++++++++++++++++ + /storage/.kodi/userdata/keyboard.xml + ++++++++++++++++++++++++++++++++++++++++ Unset by user! +++++++++++++++++++++++++++++++++++ + /storage/.kodi/userdata/keymaps + +++++++++++++++++++++++++++++++++++ +++++++++ + BL301 + +++++++++ checkbl301 not found! CoreELEC Audio Information... +++++++++++++++++++++++++++++++++++++++++++++++++++ + /sys/devices/virtual/amhdmitx/amhdmitx0/aud_cap + +++++++++++++++++++++++++++++++++++++++++++++++++++ CodingType MaxChannels SamplingFreq SampleSize PCM, 2 ch, 32/44.1/48/88.2/96/176.4/192 kHz, 16/20/24 bit PCM, 8 ch, 32/44.1/48/88.2/96/176.4/192 kHz, 16/20/24 bit AC-3, 6 ch, 32/44.1/48 kHz, MaxBitRate 640kHz DTS, 8 ch, 44.1/48 kHz, MaxBitRate 1536kHz OneBitAudio, 6 ch, 44.1 kHz, MaxBitRate 0kHz Dolby_Digital+/ATMOS, 8 ch, 44.1/48 kHz, DepValue 0x3 DTS-HD, 8 ch, 44.1/48/88.2/96/176.4/192 kHz, DepValue 0x3 DTS-HD, 8 ch, 44.1/48/88.2/96/176.4/192 kHz, DepValue 0x1 MAT, 8 ch, 44.1/48/88.2/96/176.4/192 kHz, DepValue 0x3 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + /proc/device-tree/pinctrl@ff634480/spdifout/mux/groups + ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Not Found! ++++++++++++++++++++ + /sys/class/sound + ++++++++++++++++++++ AMLAUGESOUND |-card0 |-controlC0 |-pcmC0D0p |-pcmC0D1c |-pcmC0D1p |-pcmC0D2c |-pcmC0D2p |-pcmC0D3c |-pcmC0D3p ++++++++++++++++++++++ + /proc/asound/cards + ++++++++++++++++++++++ 0 [AMLAUGESOUND ]: AML-AUGESOUND - AML-AUGESOUND AML-AUGESOUND ++++++++++++++++++++ + /proc/asound/pcm + ++++++++++++++++++++ 00-00: SPDIF-B-dummy soc:dummy-0 : : playback 1 00-01: TDM-B-T9015-audio-hifi fe01a000.t9015-1 : : playback 1 : capture 1 00-02: SPDIF-dummy soc:dummy-2 : : playback 1 : capture 1 00-03: TDM-C-dummy soc:dummy-3 : : playback 1 : capture 1 ++++++++++++ + aplay -l + ++++++++++++ **** List of PLAYBACK Hardware Devices **** card 0: AMLAUGESOUND [AML-AUGESOUND], device 0: SPDIF-B-dummy soc:dummy-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: AMLAUGESOUND [AML-AUGESOUND], device 1: TDM-B-T9015-audio-hifi fe01a000.t9015-1 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: AMLAUGESOUND [AML-AUGESOUND], device 2: SPDIF-dummy soc:dummy-2 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: AMLAUGESOUND [AML-AUGESOUND], device 3: TDM-C-dummy soc:dummy-3 [] Subdevices: 1/1 Subdevice #0: subdevice #0 ++++++++++++ + aplay -L + ++++++++++++ null Discard all samples (playback) or generate zero samples (capture) default:CARD=AMLAUGESOUND AML-AUGESOUND, Default Audio Device sysdefault:CARD=AMLAUGESOUND AML-AUGESOUND, Default Audio Device surround71:CARD=AMLAUGESOUND,DEV=0 AML-AUGESOUND, 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=AMLAUGESOUND,DEV=0 AML-AUGESOUND, IEC958 (S/PDIF) Digital Audio Output hdmi:CARD=AMLAUGESOUND,DEV=0 AML-AUGESOUND, HDMI Audio Output +++++++++++++++++++++++ + kodi audio settings + +++++++++++++++++++++++ accessibility.audiohearing: false accessibility.audiovisual: false accessibility.subhearing: false audiooutput.ac3passthrough: true audiooutput.ac3transcode: true audiooutput.atempothreshold: 2 audiooutput.audiodevice: ALSA:surround71:CARD=AMLAUGESOUND,DEV=0|AML-AUGESOUND audiooutput.boostcenter: 0 audiooutput.channels: 1 audiooutput.config: 3 audiooutput.dtshdpassthrough: true audiooutput.dtspassthrough: true audiooutput.eac3passthrough: true audiooutput.guisoundmode: 0 audiooutput.maintainoriginalvolume: true audiooutput.passthrough: true audiooutput.passthroughdevice: ALSA:hdmi:CARD=AMLAUGESOUND,DEV=0|AML-AUGESOUND audiooutput.processquality: 30 audiooutput.samplerate: 48000 audiooutput.audiooutput.stereoupmix: audiooutput.audiooutput.streamnoise: audiooutput.audiooutput.streamsilence: audiooutput.truehdpassthrough: true audiooutput.volumesteps: 20 musicplayer.replaygainavoidclipping: false musicplayer.replaygainnogainpreamp: 89 musicplayer.replaygainpreamp: 89 musicplayer.replaygaintype: 1 musicplayer.seekdelay: 750 musicplayer.seeksteps: -60,-30,-10,10,30,60 mute: false volumelevel: 1.000000 +++++++++++++++++++++++++++++++ + /storage/.config/sound.conf + +++++++++++++++++++++++++++++++ Unset by user! ++++++++++++++++++++++++++++++++ + /storage/.config/asound.conf + ++++++++++++++++++++++++++++++++ Unset by user! ++++++++++++++++++++++++++++++++++++++++ + /storage/.config/pulse-daemon.conf.d + ++++++++++++++++++++++++++++++++++++++++